Hella Marine 6-Way Compact Switch Panel, 12V, 20A, Inline Fuses

Overview

The Hella Marine 358114291 is a 6-way compact switch panel for 12V DC circuits, with a maximum load of 20A. It gives you six on/off toggle switches in a two-row layout, which is a tidy way to group common helm and console accessories without taking up much space.

The face measures 95 x 107 mm and the panel depth is 55 mm, so it fits well on smaller dashes and side consoles where clearance matters. Each switch is protected by a neoprene rubber boot to handle spray, and the inline fuses sit behind the panel for circuit protection without adding separate fuse blocks for these six runs.

Key features

• Six on/off toggle switches in a two-row layout for clean, easy labeling at the helm
• Splash-proof switch boots made from neoprene rubber for wet console conditions
• Inline fuse holders with fuses located behind the panel for built-in circuit protection
• Rated for 12V DC use with a maximum load of 20A
• Compact size: 95 x 107 x 55 mm (H x W x D) to suit tight mounting locations
• Impact-resistant plastic housing in a gray finish
• Includes a label set plus gasket and mounting hardware to finish the install neatly

Installation and setup

This panel is typically installed at the helm, in a side console, or on an electrical switch pod where it stays within reach but out of direct washdown streams. The gasket helps the panel sit cleanly against the mounting surface, and the included template makes it easier to lay out the mounting and panel opening accurately.

Plan for rear clearance so the wiring and fuse access stay serviceable after installation. Leave enough slack to pull the panel forward when you need to inspect or replace fuses.

Electrical and circuit planning

Use this panel on 12V DC systems and keep each circuit sized appropriately for the load and wiring run. High-draw gear that exceeds the panel rating should be switched through a relay or contactor, with the panel used as the control point.

It is a solid match for typical helm and utility loads such as navigation lights, cockpit or deck lights, electronics power feeds, pumps that fall within the rating, and other small onboard accessories where quick identification and fused protection matter.

What’s included

• 6-way compact switch panel (gray) with inline fuse holders and fuses
• Label set
• Mounting gasket
• Mounting screws
• Mounting template

Orders are processed within 2 business days, which includes verification, packing, and dispatch. Orders of $100 or more qualify for free shipping when eligible. For orders under $100, shipping costs are calculated at checkout based on destination, package weight, and selected service. International shipping is available for eligible products, and certain items may require additional handling, warehouse transfers, or may ship directly from the manufacturer, which can affect processing time.

Deliveries are handled by preferred carriers such as USPS, UPS, FedEx, DHL, and others depending on your location and selected service. Estimated delivery times are displayed at checkout and may vary due to customs processing, carrier delays, weather, postal disruptions, or other circumstances beyond our control. Once your order ships, you'll receive a confirmation email with tracking information. Tracking may take up to 24 hours to update on the carrier's website and is also available through your account when applicable.

We ship throughout the United States and to most international destinations for products eligible for international shipping. International orders may be subject to customs duties, taxes, brokerage charges, or other import fees, which are the customer's responsibility and are not included in the product or shipping price. PO Boxes are accepted only when shipping through USPS, and not all packages qualify for this option. If your order does not arrive within the estimated delivery window, please contact us at info@apollolighting.com or +1 (954) 375-0100 so we can assist with locating your package.

Learn more.

Returns may be requested within 30 days of receiving your order. Items must be unused, uninstalled, unaltered, and returned in their original packaging with all tags, packing materials, blank warranty cards, manuals, instructions, accessories, and included items. Certain products, including installed or used electronics, electrical components, lighting, consumables, custom or special-order items, cut-to-length products, safety equipment, and merchandise exposed to water or marine conditions, may not be eligible for return.

To request a return, sign in to your account and select the applicable order and items, and submit your request for review. Eligible unfulfilled items may also be submitted for cancellation within 1 hour of placing the order. Returns or cancellations are not considered approved until you receive confirmation from Apollo Lighting. Please do not ship or drop off merchandise before receiving return approval and instructions.

Customers are responsible for arranging and paying for return shipping unless the return is due to an error by Apollo Lighting or the item is verified as defective, damaged, or incorrect. Missing, damaged, defective, or incorrect items must be reported within 2 business days of delivery, and photos or other documentation may be required for review. If the issue is verified, Apollo Lighting may provide or reimburse return shipping and issue a replacement or refund depending on the circumstances. International customers are responsible for return shipping, duties, taxes, customs charges, brokerage fees, and other costs associated with an international return.

After your return is received and inspected, approved refunds are issued to the original payment method and may take 5-7 business days to appear after processing. Original shipping and handling charges are nonrefundable, and the value of any included free items that are not returned may be deducted from the refund. Apollo Lighting does not charge a standard restocking fee on eligible returns. Returns that are incomplete, damaged, installed, used, altered, improperly packaged, or otherwise do not meet the eligibility requirements may be refused. We recommend using a trackable and appropriately insured shipping service for all customer-arranged returns.

For assistance, contact info@apollolighting.com or call +1 (954) 375-0100.

Learn more.

Many products sold by Apollo Lighting include a manufacturer's warranty covering defects in materials or workmanship. Warranty terms vary by brand, product category, and model, so eligibility, coverage duration, exclusions, and available remedies are determined by the applicable manufacturer. We recommend reviewing the warranty information provided with your product before installation or use, especially for marine electronics, navigation equipment, lighting, electrical systems, pumps, safety equipment, and other specialized marine products.

If you need warranty service, the claim must follow the process established by the manufacturer, authorized service center, or designated warranty provider. You may be asked for proof of purchase, a serial number, product registration, photos, maintenance or installation records, or other documentation. Apollo Lighting does not determine or modify a manufacturer's warranty coverage or final claim decision, but we are happy to help provide purchase information and direct you to the appropriate manufacturer or warranty resource.

Keep your receipt, product documentation, serial number information, and original packaging when practical. Damage caused by normal wear, misuse, improper installation, insufficient maintenance, corrosion, impact, unauthorized modifications, electrical issues, or operation outside the manufacturer's specifications may not be covered. Warranty claims are separate from standard returns, so a product that has been installed, used, or exposed to marine conditions may no longer qualify for return while still remaining eligible for evaluation under the manufacturer's applicable warranty.

Learn more.