Vimar Surface-Mount Junction Box, IP44, 65 mm Dia, 35 mm Deep, 4 Cable Entries, 6pk

Overview

The Vimar VMV55001 is an IP44-rated surface-mount junction box for protecting wiring connections where you need splash protection and quick access for service.

It has a round body with a 65 mm diameter and 35 mm depth, which helps when you are fitting it behind panels or inside lockers where space is tight. The cover is a blind, snap-closed style, so you can open it for inspection without tools in most installations.

Four trimmable step membrane inlets support conduit/tube diameters of 20 mm or 25 mm. Rated insulation voltage (Ui) is 450 V, and the specified operating temperature range is 0°C to 60°C.

Key features

• IP44 protection level for locations exposed to dust and splashing water
• Compact footprint with a 65 mm diameter and 35 mm depth for confined mounting areas
• Surface mounting on walls or ceilings for straightforward retrofits and clean routing
• Snap-closed blind cover for fast access during troubleshooting and re-termination
• Four trimmable step membrane inlets to suit cable and conduit entry needs
• Supports 20 mm and 25 mm tube diameters for common marine conduit runs
• RAL 7035 grey finish for a neutral look inside technical spaces

Installation and setup

Mount the box on a flat surface where the cover can open fully and where the inlets can be oriented to keep water from pooling around cable entries. Trim each step membrane gradually so the cable or conduit passes through snugly, then keep bends gentle to avoid stressing terminations inside the box.

Because this is a junction box, plan enough slack to re-terminate in the future and leave room for connectors or terminal blocks you may be using inside. After wiring, confirm the cover is fully snapped closed around the entire perimeter.

Compatibility and fit

This box is meant for surface mounting and routing smaller accessory wiring runs or control wiring where a protected splice point is needed. Conduit/tube sizing is 20 mm or 25 mm, and the four entry points make it easier to bring in a feed and branch circuits without overcrowding a single side.

With an IP44 rating, it suits areas that see spray or condensation but are not subject to direct, sustained water exposure. For locations that can flood or take pressurized washdowns, use a higher protection level enclosure instead.

Use cases on board

Common installs include behind a helm panel, inside a console, in a cockpit locker that stays mostly dry, or on an interior bulkhead where wiring transitions from a trunk line into smaller branches.

This is a good match for boat owners and installers who want a small junction point with splash protection and a clean surface-mount layout. It also fits refits where you are adding new accessories and need a tidy place to manage splices without opening up larger panels.

Orders are processed within 2 business days, which includes verification, packing, and dispatch. Orders of $100 or more qualify for free shipping when eligible. For orders under $100, shipping costs are calculated at checkout based on destination, package weight, and selected service. International shipping is available for eligible products, and certain items may require additional handling, warehouse transfers, or may ship directly from the manufacturer, which can affect processing time.

Deliveries are handled by preferred carriers such as USPS, UPS, FedEx, DHL, and others depending on your location and selected service. Estimated delivery times are displayed at checkout and may vary due to customs processing, carrier delays, weather, postal disruptions, or other circumstances beyond our control. Once your order ships, you'll receive a confirmation email with tracking information. Tracking may take up to 24 hours to update on the carrier's website and is also available through your account when applicable.

We ship throughout the United States and to most international destinations for products eligible for international shipping. International orders may be subject to customs duties, taxes, brokerage charges, or other import fees, which are the customer's responsibility and are not included in the product or shipping price. PO Boxes are accepted only when shipping through USPS, and not all packages qualify for this option. If your order does not arrive within the estimated delivery window, please contact us at info@apollolighting.com or +1 (954) 375-0100 so we can assist with locating your package.

Learn more.

Returns may be requested within 30 days of receiving your order. Items must be unused, uninstalled, unaltered, and returned in their original packaging with all tags, packing materials, blank warranty cards, manuals, instructions, accessories, and included items. Certain products, including installed or used electronics, electrical components, lighting, consumables, custom or special-order items, cut-to-length products, safety equipment, and merchandise exposed to water or marine conditions, may not be eligible for return.

To request a return, sign in to your account and select the applicable order and items, and submit your request for review. Eligible unfulfilled items may also be submitted for cancellation within 1 hour of placing the order. Returns or cancellations are not considered approved until you receive confirmation from Apollo Lighting. Please do not ship or drop off merchandise before receiving return approval and instructions.

Customers are responsible for arranging and paying for return shipping unless the return is due to an error by Apollo Lighting or the item is verified as defective, damaged, or incorrect. Missing, damaged, defective, or incorrect items must be reported within 2 business days of delivery, and photos or other documentation may be required for review. If the issue is verified, Apollo Lighting may provide or reimburse return shipping and issue a replacement or refund depending on the circumstances. International customers are responsible for return shipping, duties, taxes, customs charges, brokerage fees, and other costs associated with an international return.

After your return is received and inspected, approved refunds are issued to the original payment method and may take 5-7 business days to appear after processing. Original shipping and handling charges are nonrefundable, and the value of any included free items that are not returned may be deducted from the refund. Apollo Lighting does not charge a standard restocking fee on eligible returns. Returns that are incomplete, damaged, installed, used, altered, improperly packaged, or otherwise do not meet the eligibility requirements may be refused. We recommend using a trackable and appropriately insured shipping service for all customer-arranged returns.

For assistance, contact info@apollolighting.com or call +1 (954) 375-0100.

Learn more.

Many products sold by Apollo Lighting include a manufacturer's warranty covering defects in materials or workmanship. Warranty terms vary by brand, product category, and model, so eligibility, coverage duration, exclusions, and available remedies are determined by the applicable manufacturer. We recommend reviewing the warranty information provided with your product before installation or use, especially for marine electronics, navigation equipment, lighting, electrical systems, pumps, safety equipment, and other specialized marine products.

If you need warranty service, the claim must follow the process established by the manufacturer, authorized service center, or designated warranty provider. You may be asked for proof of purchase, a serial number, product registration, photos, maintenance or installation records, or other documentation. Apollo Lighting does not determine or modify a manufacturer's warranty coverage or final claim decision, but we are happy to help provide purchase information and direct you to the appropriate manufacturer or warranty resource.

Keep your receipt, product documentation, serial number information, and original packaging when practical. Damage caused by normal wear, misuse, improper installation, insufficient maintenance, corrosion, impact, unauthorized modifications, electrical issues, or operation outside the manufacturer's specifications may not be covered. Warranty claims are separate from standard returns, so a product that has been installed, used, or exposed to marine conditions may no longer qualify for return while still remaining eligible for evaluation under the manufacturer's applicable warranty.

Learn more.