Lumitec Orbit Flush Mount LED Down Light, 10-30V, IP67, 4W, 2in

Overview

The Lumitec Orbit is a flush-mount LED down light for overhead lighting on boats, with an IP67 rating and a 10-30 VDC input that works on 12V and 24V systems.

It uses a 2 in (5.08 cm) face diameter with an overall depth of about 0.75 in (1.9 cm), which helps when headliner or hardtop clearance is tight. The series is rated at 4 W, and light output depends on the configuration.

Orbit is used for general cabin lighting and covered exterior areas, and it can also be set up for color accents or night lighting when you choose a multi-color version.

Key features

• 10-30 VDC input for 12V and 24V DC electrical systems
• IP67 sealed for interior spaces and exposed overhead locations, and it is not intended for permanent underwater mounting
• Flush-mount size: 2 in (5.08 cm) diameter and about 0.75 in (1.9 cm) overall depth
• Rated 4 W; white light output varies by configuration (about 130 to 210 lumens depending on version)
• White options include 5000K (CRI 70+) and 3000K warm white with higher color rendering (CRI 90+)
• Operating range listed from -31°F to 131°F (-35°C to 55°C)
• Some configurations support built-in dimming and color changes using simple power toggles from a standard SPST switch

Variants

Orbit is offered with different light outputs and two housing finishes: Brushed Stainless Steel and White finish. Output options include white (non-dimming), warm white with dimming, Spectrum RGBW, and multi-color combinations such as white/red/blue and white/red/blue/purple, plus versions that pair a non-dimming color with a dimmable white mode.

Across the range, the footprint stays consistent (2 in diameter with about 0.75 in overall depth), and the lights run on 10-30 VDC with a 4 W rating. Control behavior varies by output type, and some configurations add Lumitec control features such as Timed Toggled Protocol (TTP) and PLI while the simplest white-only versions remain straightforward on/off fixtures.

Installation and setup

Mounting uses a plate and screw pattern based on a printed cut template, then the light body inserts and rotates into the plate until it locks. Leave enough slack behind the panel so the fixture can be removed later without pulling on the wiring.

The light is polarity-sensitive. Connect the black wire to DC negative (ground) and the white or red wire to switched positive, protected by a fuse or breaker sized for the number of lights on the circuit.

The housing is fully sealed for interior and exterior mounting, but it is not meant to be installed in a location that stays underwater.

Control and dimming behavior

A standard SPST rocker or toggle switch can be used for basic control. On multi-color versions, output changes are done by switching power off and then back on to cycle through available colors, and the light returns to white after power has been off for a couple of seconds.

On two-color versions with white dimming, white light ramps in brightness. Switching off and back on during the ramp holds the selected dim level, and additional toggles move to the alternate color mode when that dimming stage is complete.

Where it fits on board

Orbit is commonly used as downlighting in salons, staterooms, companionways, and at the helm, and it also fits well under a hardtop, flybridge, or T-top where spray and vibration are part of normal use.

It is a good match for refits that need a small 2 in footprint and a shallow installation, especially when you want dimming or color modes without running extra control wiring.

Maintenance and care

Rinse salt film with fresh water and mild soap. Avoid abrasive pads on the trim, and keep wiring connections strain-relieved and protected from standing water behind the mounting surface.

What's included

• Flush-mount down light
• Mounting plate
• Mounting screws
• Rubber installation tool

Orders are processed within 2 business days, which includes verification, packing, and dispatch. Orders of $100 or more qualify for free shipping when eligible. For orders under $100, shipping costs are calculated at checkout based on destination, package weight, and selected service. International shipping is available for eligible products, and certain items may require additional handling, warehouse transfers, or may ship directly from the manufacturer, which can affect processing time.

Deliveries are handled by preferred carriers such as USPS, UPS, FedEx, DHL, and others depending on your location and selected service. Estimated delivery times are displayed at checkout and may vary due to customs processing, carrier delays, weather, postal disruptions, or other circumstances beyond our control. Once your order ships, you'll receive a confirmation email with tracking information. Tracking may take up to 24 hours to update on the carrier's website and is also available through your account when applicable.

We ship throughout the United States and to most international destinations for products eligible for international shipping. International orders may be subject to customs duties, taxes, brokerage charges, or other import fees, which are the customer's responsibility and are not included in the product or shipping price. PO Boxes are accepted only when shipping through USPS, and not all packages qualify for this option. If your order does not arrive within the estimated delivery window, please contact us at info@apollolighting.com or +1 (954) 375-0100 so we can assist with locating your package.

Learn more.

Returns may be requested within 30 days of receiving your order. Items must be unused, uninstalled, unaltered, and returned in their original packaging with all tags, packing materials, blank warranty cards, manuals, instructions, accessories, and included items. Certain products, including installed or used electronics, electrical components, lighting, consumables, custom or special-order items, cut-to-length products, safety equipment, and merchandise exposed to water or marine conditions, may not be eligible for return.

To request a return, sign in to your account and select the applicable order and items, and submit your request for review. Eligible unfulfilled items may also be submitted for cancellation within 1 hour of placing the order. Returns or cancellations are not considered approved until you receive confirmation from Apollo Lighting. Please do not ship or drop off merchandise before receiving return approval and instructions.

Customers are responsible for arranging and paying for return shipping unless the return is due to an error by Apollo Lighting or the item is verified as defective, damaged, or incorrect. Missing, damaged, defective, or incorrect items must be reported within 2 business days of delivery, and photos or other documentation may be required for review. If the issue is verified, Apollo Lighting may provide or reimburse return shipping and issue a replacement or refund depending on the circumstances. International customers are responsible for return shipping, duties, taxes, customs charges, brokerage fees, and other costs associated with an international return.

After your return is received and inspected, approved refunds are issued to the original payment method and may take 5-7 business days to appear after processing. Original shipping and handling charges are nonrefundable, and the value of any included free items that are not returned may be deducted from the refund. Apollo Lighting does not charge a standard restocking fee on eligible returns. Returns that are incomplete, damaged, installed, used, altered, improperly packaged, or otherwise do not meet the eligibility requirements may be refused. We recommend using a trackable and appropriately insured shipping service for all customer-arranged returns.

For assistance, contact info@apollolighting.com or call +1 (954) 375-0100.

Learn more.

Many products sold by Apollo Lighting include a manufacturer's warranty covering defects in materials or workmanship. Warranty terms vary by brand, product category, and model, so eligibility, coverage duration, exclusions, and available remedies are determined by the applicable manufacturer. We recommend reviewing the warranty information provided with your product before installation or use, especially for marine electronics, navigation equipment, lighting, electrical systems, pumps, safety equipment, and other specialized marine products.

If you need warranty service, the claim must follow the process established by the manufacturer, authorized service center, or designated warranty provider. You may be asked for proof of purchase, a serial number, product registration, photos, maintenance or installation records, or other documentation. Apollo Lighting does not determine or modify a manufacturer's warranty coverage or final claim decision, but we are happy to help provide purchase information and direct you to the appropriate manufacturer or warranty resource.

Keep your receipt, product documentation, serial number information, and original packaging when practical. Damage caused by normal wear, misuse, improper installation, insufficient maintenance, corrosion, impact, unauthorized modifications, electrical issues, or operation outside the manufacturer's specifications may not be covered. Warranty claims are separate from standard returns, so a product that has been installed, used, or exposed to marine conditions may no longer qualify for return while still remaining eligible for evaluation under the manufacturer's applicable warranty.

Learn more.