Garmin XMD-MCB Ignition-Protected Circuit Breaker, IP67, Manual Reset, SAE J1171
SKU: APL580765-V4 Part number: 010-13684-00 Barcode: 699440909471
Description
Overview
The Garmin XMD-MCB waterproof ignition protected circuit breaker is a manual-reset breaker that protects a DC power feed from overloads and shorts while keeping water out of the mechanism. It is IP67 rated and suitable for washdowns and brief immersion up to 1 meter, and it carries an SAE J1171 external ignition-protected rating for use in engine compartments and fuel tank spaces.
Instead of replacing a blown fuse, you reset the breaker using the built-in high-visibility switch. The range covers 30 A through 80 A, which makes it useful for marine audio amplifier power runs, accessory buses, and other high-current circuits where you want protection that is easy to service on the water.
Key features
- Manual-reset design with a high-visibility switch, so a tripped circuit can be restored without swapping fuses
- IP67 rating for exposure to spray, rain, and washdowns, with sealing that supports brief immersion up to 1 meter
- SAE J1171 external ignition-protected rating for use in engine compartments and fuel tank spaces
- Corrosion-resistant connection points with stainless steel hardware for marine electrical terminations
- Available amperage ratings from 30 A to 80 A to match different circuit protection needs
Installation and setup
Mount the breaker on a solid surface where the reset switch can be reached without removing panels. Use properly crimped ring terminals at the studs and marine-grade cable sized for the amperage and run length. Place the breaker close to the power source to keep the unprotected section of cable short, as you would with any main feed or branch protection.
Compatibility and fit
This is a DC circuit breaker intended for boat electrical systems and accessory circuits. The amperage rating is the selection point, and it should be matched to the wire gauge and the load you are protecting so the breaker trips before the wiring is overstressed. When used for audio amplifiers, match the breaker size to the amplifier power wiring and the total current draw of the system.
Use cases on board
It suits boats that see spray, rain, and frequent washdowns, and it is also appropriate for installations in engine rooms where ignition protection matters. It is commonly installed inline on feeds to marine stereos, amplifiers, distribution blocks, lighting circuits, and other accessories that benefit from a resettable breaker.
Variants
This product is offered in multiple amperage ratings to match different circuit loads.
Across the range, the breaker keeps the same manual-reset format with an IP67-rated housing, an SAE J1171 ignition-protected rating, and corrosion-resistant connection points. The amperage rating is what changes between versions.
- 010-13681-00: 30 A amperage rating. Often used for accessory circuits where the wiring is sized around a 30 amp limit.
- 010-13682-00: 40 A amperage rating. Common on higher-draw accessory feeds where protection is typically set at 40 amps.
- 010-13683-00: 50 A amperage rating. Frequently used on marine audio power feeds and small distribution blocks.
- 010-13684-00: 60 A amperage rating. Used for higher-current accessory runs where cable sizing supports a 60 amp breaker.
- 010-13685-00: 80 A amperage rating. Suits high-current feeds where protection in the 80 amp range is required.
Specifications
- Product Color
- Black
- Product Material
- ABS Plastic
- Product Type
- Circuit Breaker
- Amperage
- 30A, 80A
- Degree of Protection
- IP67
- Power Consumption
- N/A
Reviews (0)
Shipping and delivery
Orders are processed within 2 business days, which includes verification, packing, and dispatch. Orders of $100 or more qualify for free shipping when eligible. For orders under $100, shipping costs are calculated at checkout based on destination, package weight, and selected service. International shipping is available for eligible products, and certain items may require additional handling, warehouse transfers, or may ship directly from the manufacturer, which can affect processing time.
Deliveries are handled by preferred carriers such as USPS, UPS, FedEx, DHL, and others depending on your location and selected service. Estimated delivery times are displayed at checkout and may vary due to customs processing, carrier delays, weather, postal disruptions, or other circumstances beyond our control. Once your order ships, you'll receive a confirmation email with tracking information. Tracking may take up to 24 hours to update on the carrier's website and is also available through your account when applicable.
We ship throughout the United States and to most international destinations for products eligible for international shipping. International orders may be subject to customs duties, taxes, brokerage charges, or other import fees, which are the customer's responsibility and are not included in the product or shipping price. PO Boxes are accepted only when shipping through USPS, and not all packages qualify for this option. If your order does not arrive within the estimated delivery window, please contact us at info@apollolighting.com or +1 (954) 375-0100 so we can assist with locating your package.
Learn more.
Returns and refunds
Returns may be requested within 30 days of receiving your order. Items must be unused, uninstalled, unaltered, and returned in their original packaging with all tags, packing materials, blank warranty cards, manuals, instructions, accessories, and included items. Certain products, including installed or used electronics, electrical components, lighting, consumables, custom or special-order items, cut-to-length products, safety equipment, and merchandise exposed to water or marine conditions, may not be eligible for return.
To request a return, sign in to your account and select the applicable order and items, and submit your request for review. Eligible unfulfilled items may also be submitted for cancellation within 1 hour of placing the order. Returns or cancellations are not considered approved until you receive confirmation from Apollo Lighting. Please do not ship or drop off merchandise before receiving return approval and instructions.
Customers are responsible for arranging and paying for return shipping unless the return is due to an error by Apollo Lighting or the item is verified as defective, damaged, or incorrect. Missing, damaged, defective, or incorrect items must be reported within 2 business days of delivery, and photos or other documentation may be required for review. If the issue is verified, Apollo Lighting may provide or reimburse return shipping and issue a replacement or refund depending on the circumstances. International customers are responsible for return shipping, duties, taxes, customs charges, brokerage fees, and other costs associated with an international return.
After your return is received and inspected, approved refunds are issued to the original payment method and may take 5-7 business days to appear after processing. Original shipping and handling charges are nonrefundable, and the value of any included free items that are not returned may be deducted from the refund. Apollo Lighting does not charge a standard restocking fee on eligible returns. Returns that are incomplete, damaged, installed, used, altered, improperly packaged, or otherwise do not meet the eligibility requirements may be refused. We recommend using a trackable and appropriately insured shipping service for all customer-arranged returns.
For assistance, contact info@apollolighting.com or call +1 (954) 375-0100.
Learn more.
Product warranty
Many products sold by Apollo Lighting include a manufacturer's warranty covering defects in materials or workmanship. Warranty terms vary by brand, product category, and model, so eligibility, coverage duration, exclusions, and available remedies are determined by the applicable manufacturer. We recommend reviewing the warranty information provided with your product before installation or use, especially for marine electronics, navigation equipment, lighting, electrical systems, pumps, safety equipment, and other specialized marine products.
If you need warranty service, the claim must follow the process established by the manufacturer, authorized service center, or designated warranty provider. You may be asked for proof of purchase, a serial number, product registration, photos, maintenance or installation records, or other documentation. Apollo Lighting does not determine or modify a manufacturer's warranty coverage or final claim decision, but we are happy to help provide purchase information and direct you to the appropriate manufacturer or warranty resource.
Keep your receipt, product documentation, serial number information, and original packaging when practical. Damage caused by normal wear, misuse, improper installation, insufficient maintenance, corrosion, impact, unauthorized modifications, electrical issues, or operation outside the manufacturer's specifications may not be covered. Warranty claims are separate from standard returns, so a product that has been installed, used, or exposed to marine conditions may no longer qualify for return while still remaining eligible for evaluation under the manufacturer's applicable warranty.
Learn more.





