TACO Marine LATCH-tite Square Latch, 2-7/16 in, SS316, Polished

Overview

The TACO Marine F16-2525 is a LATCH-tite stainless steel square latch for securing hatches, lids, and access panels on boats. It has a 2-7/16" x 2-7/16" square face, a 2-1/16" hole size, 1-3/4" adjustable depth, and 2-5/16" overall depth, giving installers clear measurements for retrofit or new-build work.

The latch uses cast Type 316 stainless steel for the latch, shaft, and tongue, which suits exposed marine areas where saltwater, spray, and frequent handling are part of normal use. A stainless steel shaft with bushing and twin Nitrile O-rings helps limit water penetration around the handle assembly.

Key features

• Cast Type 316 stainless steel latch, shaft, and tongue for use in saltwater marine hardware applications.
• 2-7/16" square face with a deluxe polished finish for a clean look on hatches, lockers, and access panels.
• Installs vertically or horizontally, so it can suit different panel layouts and hatch orientations.
• Over-center anti-rattle handle helps keep noise down when the boat is underway.
• Stainless steel shaft with bushing and twin Nitrile O-rings adds water protection around the latch mechanism.
• Adjustable 1-3/4" depth helps fine-tune engagement with the hatch or panel catch.
• Concealed fastener layout keeps the installed face neat and reduces visible hardware.
• Uses #8 screws and fits a 2-1/16" hole size.

Installation and fit

This latch is a practical match for boat lockers, deck hatches, console doors, and service panels that need a low-profile square latch with a polished stainless face. The 5/32" edge thickness, 2-1/16" hole size, and adjustable depth should be checked against the hatch core, liner, and catch position before drilling or replacing an older latch.

Because it can be mounted vertically or horizontally, it gives more flexibility on tight panels where hinge position, gasket compression, or nearby hardware affects the best handle orientation. The concealed fastener layout is also useful on visible cockpit, transom, and cabin hardware where a finished appearance matters.

Materials and corrosion resistance

Type 316 stainless steel is a strong choice for marine latch hardware because it handles salt spray and wet deck environments better than ordinary stainless grades. The polished finish also helps the latch blend with other stainless fittings commonly found on center consoles, sportfishing boats, cruisers, and sailboats.

Use cases on board

This latch suits owners, refit shops, and builders replacing worn hatch hardware or fitting new access points where the latch needs to stay quiet and secure underway. It is especially useful on storage lids and deck panels that see spray, washdowns, vibration, and repeated opening during normal boating.

Orders are processed within 2 business days, which includes verification, packing, and dispatch. Orders of $100 or more qualify for free shipping when eligible. For orders under $100, shipping costs are calculated at checkout based on destination, package weight, and selected service. International shipping is available for eligible products, and certain items may require additional handling, warehouse transfers, or may ship directly from the manufacturer, which can affect processing time.

Deliveries are handled by preferred carriers such as USPS, UPS, FedEx, DHL, and others depending on your location and selected service. Estimated delivery times are displayed at checkout and may vary due to customs processing, carrier delays, weather, postal disruptions, or other circumstances beyond our control. Once your order ships, you'll receive a confirmation email with tracking information. Tracking may take up to 24 hours to update on the carrier's website and is also available through your account when applicable.

We ship throughout the United States and to most international destinations for products eligible for international shipping. International orders may be subject to customs duties, taxes, brokerage charges, or other import fees, which are the customer's responsibility and are not included in the product or shipping price. PO Boxes are accepted only when shipping through USPS, and not all packages qualify for this option. If your order does not arrive within the estimated delivery window, please contact us at info@apollolighting.com or +1 (954) 375-0100 so we can assist with locating your package.

Learn more.

Returns may be requested within 30 days of receiving your order. Items must be unused, uninstalled, unaltered, and returned in their original packaging with all tags, packing materials, blank warranty cards, manuals, instructions, accessories, and included items. Certain products, including installed or used electronics, electrical components, lighting, consumables, custom or special-order items, cut-to-length products, safety equipment, and merchandise exposed to water or marine conditions, may not be eligible for return.

To request a return, sign in to your account and select the applicable order and items, and submit your request for review. Eligible unfulfilled items may also be submitted for cancellation within 1 hour of placing the order. Returns or cancellations are not considered approved until you receive confirmation from Apollo Lighting. Please do not ship or drop off merchandise before receiving return approval and instructions.

Customers are responsible for arranging and paying for return shipping unless the return is due to an error by Apollo Lighting or the item is verified as defective, damaged, or incorrect. Missing, damaged, defective, or incorrect items must be reported within 2 business days of delivery, and photos or other documentation may be required for review. If the issue is verified, Apollo Lighting may provide or reimburse return shipping and issue a replacement or refund depending on the circumstances. International customers are responsible for return shipping, duties, taxes, customs charges, brokerage fees, and other costs associated with an international return.

After your return is received and inspected, approved refunds are issued to the original payment method and may take 5-7 business days to appear after processing. Original shipping and handling charges are nonrefundable, and the value of any included free items that are not returned may be deducted from the refund. Apollo Lighting does not charge a standard restocking fee on eligible returns. Returns that are incomplete, damaged, installed, used, altered, improperly packaged, or otherwise do not meet the eligibility requirements may be refused. We recommend using a trackable and appropriately insured shipping service for all customer-arranged returns.

For assistance, contact info@apollolighting.com or call +1 (954) 375-0100.

Learn more.

Many products sold by Apollo Lighting include a manufacturer's warranty covering defects in materials or workmanship. Warranty terms vary by brand, product category, and model, so eligibility, coverage duration, exclusions, and available remedies are determined by the applicable manufacturer. We recommend reviewing the warranty information provided with your product before installation or use, especially for marine electronics, navigation equipment, lighting, electrical systems, pumps, safety equipment, and other specialized marine products.

If you need warranty service, the claim must follow the process established by the manufacturer, authorized service center, or designated warranty provider. You may be asked for proof of purchase, a serial number, product registration, photos, maintenance or installation records, or other documentation. Apollo Lighting does not determine or modify a manufacturer's warranty coverage or final claim decision, but we are happy to help provide purchase information and direct you to the appropriate manufacturer or warranty resource.

Keep your receipt, product documentation, serial number information, and original packaging when practical. Damage caused by normal wear, misuse, improper installation, insufficient maintenance, corrosion, impact, unauthorized modifications, electrical issues, or operation outside the manufacturer's specifications may not be covered. Warranty claims are separate from standard returns, so a product that has been installed, used, or exposed to marine conditions may no longer qualify for return while still remaining eligible for evaluation under the manufacturer's applicable warranty.

Learn more.