Simrad Micro-C Backbone Kit, NMEA 2000, 4.5m Cable, Power Cable, 3 T-Connectors, 2 Terminators

Overview

The Simrad 000-10760-001 is an NMEA 2000 Micro-C starter kit that gives you the core pieces to build a small backbone and start networking onboard electronics. It includes a 4.5 m (15 ft) N2K cable, three T-connectors, two network terminators, and a network power cable.

This kit is meant for creating a proper NMEA 2000 backbone so devices can share data like GPS, heading, depth, engine info, tank levels, and wind, depending on what you have installed. It is a practical starting point for a new install or for cleaning up a network that was pieced together over time.

Key features

• NMEA 2000 Micro-C backbone starter components in one kit for a clean, standards-based network layout
• Includes a 4.5 m (15 ft) N2K cable to form the initial backbone run between connection points
• Three T-connectors let you add multiple devices while keeping the backbone as a straight-through trunk
• Two terminators to correctly finish both ends of the backbone, which is required for stable network communication
• Network power cable to feed the backbone from the vessel DC system through a properly protected circuit

Installation and setup

A typical layout is a backbone cable with T-connectors joined in-line, with one terminator at each end. Devices connect to the vertical leg of a T using their own drop cable, keeping the backbone intact as you add equipment.

The power cable supplies the network. Connect it to a dedicated DC feed on your boat through an appropriate fuse or breaker, and route the backbone where it stays protected from chafe, standing water, and areas that see frequent snagging or foot traffic.

Compatibility and fit

Connections are NMEA 2000 Micro-C style. It fits systems that use standard Micro-C cabling and is commonly used across many marine electronics ecosystems that speak NMEA 2000. If some of your equipment uses a different physical connector style, an adapter cable may be required for those specific devices.

What’s included

• Network power cable
• 4.5 m (15 ft) N2K cable
• 3 T-connectors
• 2 network terminators

Use on board

This is a good match for boaters adding their first NMEA 2000 backbone for a chartplotter, autopilot, AIS, engine gateway, or sensor package, or for anyone who wants to start with the correct terminators and T-connectors instead of mixing parts. It also works well when you plan to expand later by adding more backbone extension cables and additional T-connectors as the network grows.

Orders are processed within 2 business days, which includes verification, packing, and dispatch. Orders of $100 or more qualify for free shipping when eligible. For orders under $100, shipping costs are calculated at checkout based on destination, package weight, and selected service. International shipping is available for eligible products, and certain items may require additional handling, warehouse transfers, or may ship directly from the manufacturer, which can affect processing time.

Deliveries are handled by preferred carriers such as USPS, UPS, FedEx, DHL, and others depending on your location and selected service. Estimated delivery times are displayed at checkout and may vary due to customs processing, carrier delays, weather, postal disruptions, or other circumstances beyond our control. Once your order ships, you'll receive a confirmation email with tracking information. Tracking may take up to 24 hours to update on the carrier's website and is also available through your account when applicable.

We ship throughout the United States and to most international destinations for products eligible for international shipping. International orders may be subject to customs duties, taxes, brokerage charges, or other import fees, which are the customer's responsibility and are not included in the product or shipping price. PO Boxes are accepted only when shipping through USPS, and not all packages qualify for this option. If your order does not arrive within the estimated delivery window, please contact us at info@apollolighting.com or +1 (954) 375-0100 so we can assist with locating your package.

Learn more.

Returns may be requested within 30 days of receiving your order. Items must be unused, uninstalled, unaltered, and returned in their original packaging with all tags, packing materials, blank warranty cards, manuals, instructions, accessories, and included items. Certain products, including installed or used electronics, electrical components, lighting, consumables, custom or special-order items, cut-to-length products, safety equipment, and merchandise exposed to water or marine conditions, may not be eligible for return.

To request a return, sign in to your account and select the applicable order and items, and submit your request for review. Eligible unfulfilled items may also be submitted for cancellation within 1 hour of placing the order. Returns or cancellations are not considered approved until you receive confirmation from Apollo Lighting. Please do not ship or drop off merchandise before receiving return approval and instructions.

Customers are responsible for arranging and paying for return shipping unless the return is due to an error by Apollo Lighting or the item is verified as defective, damaged, or incorrect. Missing, damaged, defective, or incorrect items must be reported within 2 business days of delivery, and photos or other documentation may be required for review. If the issue is verified, Apollo Lighting may provide or reimburse return shipping and issue a replacement or refund depending on the circumstances. International customers are responsible for return shipping, duties, taxes, customs charges, brokerage fees, and other costs associated with an international return.

After your return is received and inspected, approved refunds are issued to the original payment method and may take 5-7 business days to appear after processing. Original shipping and handling charges are nonrefundable, and the value of any included free items that are not returned may be deducted from the refund. Apollo Lighting does not charge a standard restocking fee on eligible returns. Returns that are incomplete, damaged, installed, used, altered, improperly packaged, or otherwise do not meet the eligibility requirements may be refused. We recommend using a trackable and appropriately insured shipping service for all customer-arranged returns.

For assistance, contact info@apollolighting.com or call +1 (954) 375-0100.

Learn more.

Many products sold by Apollo Lighting include a manufacturer's warranty covering defects in materials or workmanship. Warranty terms vary by brand, product category, and model, so eligibility, coverage duration, exclusions, and available remedies are determined by the applicable manufacturer. We recommend reviewing the warranty information provided with your product before installation or use, especially for marine electronics, navigation equipment, lighting, electrical systems, pumps, safety equipment, and other specialized marine products.

If you need warranty service, the claim must follow the process established by the manufacturer, authorized service center, or designated warranty provider. You may be asked for proof of purchase, a serial number, product registration, photos, maintenance or installation records, or other documentation. Apollo Lighting does not determine or modify a manufacturer's warranty coverage or final claim decision, but we are happy to help provide purchase information and direct you to the appropriate manufacturer or warranty resource.

Keep your receipt, product documentation, serial number information, and original packaging when practical. Damage caused by normal wear, misuse, improper installation, insufficient maintenance, corrosion, impact, unauthorized modifications, electrical issues, or operation outside the manufacturer's specifications may not be covered. Warranty claims are separate from standard returns, so a product that has been installed, used, or exposed to marine conditions may no longer qualify for return while still remaining eligible for evaluation under the manufacturer's applicable warranty.

Learn more.