Lumishore ORA SMX11 Surface Mount Underwater LED Light, Blue Light, 10.5-14.5V DC, IP68, 60° Beam, 85mm Face Diameter

Overview

The Lumishore 010-04351-00 is a surface-mount underwater LED light that outputs blue light and runs on 12 VDC systems, with a 10.5 to 14.5 V operating range and a 1 A maximum current draw.

It throws a focused 60° beam and sits close to the transom thanks to its low-profile footprint (85 mm / 3.34 in face diameter, 10 mm / 0.39 in housing height), which helps when space is tight around trim tabs, ladders, and transducers.

An IP68 ingress rating and built-in protection features help it hold up to real boating conditions like washdowns, spray, and vibration.

Key features

• 12 V only operation (10.5 to 14.5 VDC) with 1 A maximum current draw
• Single-color blue output with straightforward on/off switching
• IP68 water ingress rating for submersion and wet transom environments
• 60° beam angle for a concentrated pool of light behind the boat
• Low-profile surface-mount housing: 85 mm (3.34 in) face diameter, 10 mm (0.39 in) height
• Internal driver with soft-start, surge protection (3,000 V), reverse polarity protection, automatic thermal roll-back, and low-voltage control
• 2 m (6 ft 6 in) cable length with a 13 mm (0.51 in) cable pass-through hole size
• Mounting uses three A4 stainless steel screws; bonding is not required

Installation and setup

Plan the mounting location on the transom so the light face sits clear of strakes, trim tabs, and hardware that can shadow the beam. Drill a 13 mm (0.51 in) pass-through for the cable, then bed the screws and cable entry with a marine sealant suitable for your hull material.

On the inside of the transom, secure the wiring so it cannot move with vibration, and keep the connection points in a dry, protected area whenever possible.

Electrical and control

This light is for 12 VDC systems only. Wire it on a fused, switched 12 V circuit, and size the wire and fuse to match a 1 A load plus the length of your run.

Because it is single color, a standard on/off switch is all that is needed for basic control.

Use on board

The compact face size suits smaller transoms and tight mounting spots, including center consoles, bay boats, and smaller cruisers. Blue underwater lighting is commonly used for low-glare night ambience at the dock and for drawing baitfish close to the stern when the boat is at rest.

Maintenance and care

Rinse the light after saltwater use and keep the face clean so the beam stays sharp. Periodically check the sealant around the cable pass-through and confirm the mounting screws remain snug.

Orders are processed within 2 business days, which includes verification, packing, and dispatch. Orders of $100 or more qualify for free shipping when eligible. For orders under $100, shipping costs are calculated at checkout based on destination, package weight, and selected service. International shipping is available for eligible products, and certain items may require additional handling, warehouse transfers, or may ship directly from the manufacturer, which can affect processing time.

Deliveries are handled by preferred carriers such as USPS, UPS, FedEx, DHL, and others depending on your location and selected service. Estimated delivery times are displayed at checkout and may vary due to customs processing, carrier delays, weather, postal disruptions, or other circumstances beyond our control. Once your order ships, you'll receive a confirmation email with tracking information. Tracking may take up to 24 hours to update on the carrier's website and is also available through your account when applicable.

We ship throughout the United States and to most international destinations for products eligible for international shipping. International orders may be subject to customs duties, taxes, brokerage charges, or other import fees, which are the customer's responsibility and are not included in the product or shipping price. PO Boxes are accepted only when shipping through USPS, and not all packages qualify for this option. If your order does not arrive within the estimated delivery window, please contact us at info@apollolighting.com or +1 (954) 375-0100 so we can assist with locating your package.

Learn more.

Returns may be requested within 30 days of receiving your order. Items must be unused, uninstalled, unaltered, and returned in their original packaging with all tags, packing materials, blank warranty cards, manuals, instructions, accessories, and included items. Certain products, including installed or used electronics, electrical components, lighting, consumables, custom or special-order items, cut-to-length products, safety equipment, and merchandise exposed to water or marine conditions, may not be eligible for return.

To request a return, sign in to your account and select the applicable order and items, and submit your request for review. Eligible unfulfilled items may also be submitted for cancellation within 1 hour of placing the order. Returns or cancellations are not considered approved until you receive confirmation from Apollo Lighting. Please do not ship or drop off merchandise before receiving return approval and instructions.

Customers are responsible for arranging and paying for return shipping unless the return is due to an error by Apollo Lighting or the item is verified as defective, damaged, or incorrect. Missing, damaged, defective, or incorrect items must be reported within 2 business days of delivery, and photos or other documentation may be required for review. If the issue is verified, Apollo Lighting may provide or reimburse return shipping and issue a replacement or refund depending on the circumstances. International customers are responsible for return shipping, duties, taxes, customs charges, brokerage fees, and other costs associated with an international return.

After your return is received and inspected, approved refunds are issued to the original payment method and may take 5-7 business days to appear after processing. Original shipping and handling charges are nonrefundable, and the value of any included free items that are not returned may be deducted from the refund. Apollo Lighting does not charge a standard restocking fee on eligible returns. Returns that are incomplete, damaged, installed, used, altered, improperly packaged, or otherwise do not meet the eligibility requirements may be refused. We recommend using a trackable and appropriately insured shipping service for all customer-arranged returns.

For assistance, contact info@apollolighting.com or call +1 (954) 375-0100.

Learn more.

Many products sold by Apollo Lighting include a manufacturer's warranty covering defects in materials or workmanship. Warranty terms vary by brand, product category, and model, so eligibility, coverage duration, exclusions, and available remedies are determined by the applicable manufacturer. We recommend reviewing the warranty information provided with your product before installation or use, especially for marine electronics, navigation equipment, lighting, electrical systems, pumps, safety equipment, and other specialized marine products.

If you need warranty service, the claim must follow the process established by the manufacturer, authorized service center, or designated warranty provider. You may be asked for proof of purchase, a serial number, product registration, photos, maintenance or installation records, or other documentation. Apollo Lighting does not determine or modify a manufacturer's warranty coverage or final claim decision, but we are happy to help provide purchase information and direct you to the appropriate manufacturer or warranty resource.

Keep your receipt, product documentation, serial number information, and original packaging when practical. Damage caused by normal wear, misuse, improper installation, insufficient maintenance, corrosion, impact, unauthorized modifications, electrical issues, or operation outside the manufacturer's specifications may not be covered. Warranty claims are separate from standard returns, so a product that has been installed, used, or exposed to marine conditions may no longer qualify for return while still remaining eligible for evaluation under the manufacturer's applicable warranty.

Learn more.