Lumishore LUX SL180 LED Strip Light, Full Spectrum CRGBW, 5m, IP68, 180 LEDs/m, Tunable White 2700K-6500K

Overview

The Lumishore 010-04408-00 is a 5000 mm LUX SL180 CRGBW LED strip light for above-water accent lighting on boats, with tunable white from 2700K to 6500K and 180 LEDs per meter.

The strip is fully encapsulated and potted with an IP68 rating and a slim 14.5 mm x 5 mm cross section, so it fits cleanly under gunwales, toe-kicks, lockers, and hardtop overhangs where you want the light hidden.

It must be run through a compatible LUX Strip Light Driver (required) and it is supplied as a factory-sealed length to maintain the IP68 seal.

Key features

• 5 m (5000 mm) pre-made length that is factory sealed to maintain the IP68 rating and is not intended to be cut.
• Full spectrum CRGBW lighting plus tunable white (2700K to 6500K) for color scenes and practical white light.
• 180 LEDs per meter with a 5 W per meter power rating for planning driver capacity and onboard loads.
• IP68 rated housing with UV-resistant materials and salt spray testing for exposed installs above the waterline.
• Low-profile strip (14.5 mm x 5 mm) that tucks into channels and tight trim lines without bulky fixtures.
• Installs with adhesive backing, with the option to add mechanical fastening where spray, heat, or tight bends call for extra hold.
• Works with a LUX Strip Light Driver, with support for multiple strips per driver up to 10 m total.
• Control can be via a momentary switch, or expanded into EOS-LUX setups that support compatible MFD integration with the right interface accessories.

What’s included

• One (1) LUX Strip Light SL180, 5000 mm length

Installation and setup

Lay out the route before peeling the backing. The strip has a minimum 50 mm bend radius in the vertical axis and it should not be twisted or bent sideways.

For the adhesive to hold, clean the mounting surface with isopropyl alcohol and press along the edges of the strip rather than over the LEDs. In damp lockers, open cockpits, and other exposed spots, add mechanical fastening along the run and around bends. Let the adhesive set for 24 hours before powering it on.

This strip is supplied in a factory-sealed length to maintain the IP68 seal, so it should not be cut or re-terminated.

Electrical and control

The strip connects to a compatible LUX Strip Light Driver module and should not be wired directly to the boat's 12 V or 24 V supply. The driver supplies the strip and handles dimming and color control.

Control can be as simple as a momentary switch, or expanded into an EOS-LUX network setup that can be tied into supported MFD control with the correct interface accessories.

When planning the system, note the 5 W per meter rating and the 10 m total strip limit per driver.

Compatibility and fit

Use it for above-water applications where an IP68 strip helps with spray and washdowns, such as under gunwales, coamings, steps, console toe-kicks, and inside lockers. It is not meant for permanent submersion.

The 5 m length works well when you want a continuous run across a cockpit or along a cabin perimeter without splices. Measure the route and allow for gentle bends so the strip lays flat.

Use cases on board

This is a good match for boaters who want one strip that can switch between color scenes and adjustable white for practical lighting, without adding bulky fixtures. It also suits installs where space is tight and you want the light tucked into a recess or channel.

Maintenance and care

Rinse salt film off with fresh water during routine washdowns and avoid harsh solvents on the encapsulated surface. If the strip is mounted where it sees strong direct sun, keep it shaded where practical to reduce heat buildup and help the adhesive stay put.

Orders are processed within 2 business days, which includes verification, packing, and dispatch. Orders of $100 or more qualify for free shipping when eligible. For orders under $100, shipping costs are calculated at checkout based on destination, package weight, and selected service. International shipping is available for eligible products, and certain items may require additional handling, warehouse transfers, or may ship directly from the manufacturer, which can affect processing time.

Deliveries are handled by preferred carriers such as USPS, UPS, FedEx, DHL, and others depending on your location and selected service. Estimated delivery times are displayed at checkout and may vary due to customs processing, carrier delays, weather, postal disruptions, or other circumstances beyond our control. Once your order ships, you'll receive a confirmation email with tracking information. Tracking may take up to 24 hours to update on the carrier's website and is also available through your account when applicable.

We ship throughout the United States and to most international destinations for products eligible for international shipping. International orders may be subject to customs duties, taxes, brokerage charges, or other import fees, which are the customer's responsibility and are not included in the product or shipping price. PO Boxes are accepted only when shipping through USPS, and not all packages qualify for this option. If your order does not arrive within the estimated delivery window, please contact us at info@apollolighting.com or +1 (954) 375-0100 so we can assist with locating your package.

Learn more.

Returns may be requested within 30 days of receiving your order. Items must be unused, uninstalled, unaltered, and returned in their original packaging with all tags, packing materials, blank warranty cards, manuals, instructions, accessories, and included items. Certain products, including installed or used electronics, electrical components, lighting, consumables, custom or special-order items, cut-to-length products, safety equipment, and merchandise exposed to water or marine conditions, may not be eligible for return.

To request a return, sign in to your account and select the applicable order and items, and submit your request for review. Eligible unfulfilled items may also be submitted for cancellation within 1 hour of placing the order. Returns or cancellations are not considered approved until you receive confirmation from Apollo Lighting. Please do not ship or drop off merchandise before receiving return approval and instructions.

Customers are responsible for arranging and paying for return shipping unless the return is due to an error by Apollo Lighting or the item is verified as defective, damaged, or incorrect. Missing, damaged, defective, or incorrect items must be reported within 2 business days of delivery, and photos or other documentation may be required for review. If the issue is verified, Apollo Lighting may provide or reimburse return shipping and issue a replacement or refund depending on the circumstances. International customers are responsible for return shipping, duties, taxes, customs charges, brokerage fees, and other costs associated with an international return.

After your return is received and inspected, approved refunds are issued to the original payment method and may take 5-7 business days to appear after processing. Original shipping and handling charges are nonrefundable, and the value of any included free items that are not returned may be deducted from the refund. Apollo Lighting does not charge a standard restocking fee on eligible returns. Returns that are incomplete, damaged, installed, used, altered, improperly packaged, or otherwise do not meet the eligibility requirements may be refused. We recommend using a trackable and appropriately insured shipping service for all customer-arranged returns.

For assistance, contact info@apollolighting.com or call +1 (954) 375-0100.

Learn more.

Many products sold by Apollo Lighting include a manufacturer's warranty covering defects in materials or workmanship. Warranty terms vary by brand, product category, and model, so eligibility, coverage duration, exclusions, and available remedies are determined by the applicable manufacturer. We recommend reviewing the warranty information provided with your product before installation or use, especially for marine electronics, navigation equipment, lighting, electrical systems, pumps, safety equipment, and other specialized marine products.

If you need warranty service, the claim must follow the process established by the manufacturer, authorized service center, or designated warranty provider. You may be asked for proof of purchase, a serial number, product registration, photos, maintenance or installation records, or other documentation. Apollo Lighting does not determine or modify a manufacturer's warranty coverage or final claim decision, but we are happy to help provide purchase information and direct you to the appropriate manufacturer or warranty resource.

Keep your receipt, product documentation, serial number information, and original packaging when practical. Damage caused by normal wear, misuse, improper installation, insufficient maintenance, corrosion, impact, unauthorized modifications, electrical issues, or operation outside the manufacturer's specifications may not be covered. Warranty claims are separate from standard returns, so a product that has been installed, used, or exposed to marine conditions may no longer qualify for return while still remaining eligible for evaluation under the manufacturer's applicable warranty.

Learn more.