Lumitec Aurora Surface Mount LED Dome Light, 10-30V, IP67, Dimmable, 4in Diameter, 0.73in Depth, Ignition Protected

Overview

The Lumitec Aurora LED Dome Light is a surface-mount LED ceiling light for 10-30 VDC systems, with IP67 sealing for areas that see spray and washdowns.

White output is rated at 180 lumens with 4W draw and a 5000K color temperature. Current draw is approximately 290 mA at 12 VDC and 160 mA at 24 VDC, and the fixture measures 4.00 in (W) x 4.00 in (H) x 0.73 in (D) for a low-profile fit on overhead panels.

It is certified ignition protected, which helps when you are installing lighting in spaces where vapor protection matters along with typical cabin and cockpit locations.

Key features

• Operates on 10-30 VDC for 12V and 24V boats
• White output rated at 180 lumens, 5000K color temperature, CRI 70+
• Rated power: 4W; current draw approx 290 mA at 12 VDC and 160 mA at 24 VDC
• IP67 compliant sealing for wet areas and washdowns
• Certified ignition protected
• 4.00 in (W) x 4.00 in (H) x 0.73 in (D) surface-mount form factor
• Dimming and, on two-color versions, color selection are controlled by rotating the bezel
• Operating temperature range: -35 to +55 C

Variants

This series is offered with two trim finishes and three light output options.

Configurations vary by finish (white or polished stainless steel) and by light color (white only, white/blue dimming, or white/red dimming). Electrical ratings, IP67 sealing, and overall dimensions remain the same across the range.

What’s included

• Aurora LED dome light
• Four #6 self-tapping mounting screws

Installation and setup

This is a surface-mount light that fastens with four #6 screws. Plan for a 3/4 in wire exit hole behind the fixture and pilot holes for the mounting screws, then route your supply wiring to a switched DC circuit.

On two-color versions, rotating the bezel selects the light output and sets the dim level. That keeps control at the fixture without adding separate switches at the helm or bulkhead.

Protect the circuit with a fuse sized for your installation and the number of lights on the run.

Electrical and system integration

The light runs on 10-30 VDC, which covers both 12V and 24V systems. The low current draw is useful when you are planning overnight lighting loads in cabins, cockpits, and hardtop overhangs.

Placement on board

IP67 sealing lets Aurora work in places that get wet, such as under a hardtop, in a cockpit overhead, or in a head compartment. The white-only version suits general lighting, while the white/red or white/blue versions add a second color for low-glare night use or accent lighting.

It is a good match for owners replacing older dome lights who want wide area lighting with lower power draw and a low-profile footprint.

Maintenance and care

Rinse and wipe the lens and bezel with fresh water and a soft cloth after salt exposure. Avoid abrasive cleaners on the polished stainless steel finish to keep the surface looking clean.

Orders are processed within 2 business days, which includes verification, packing, and dispatch. Orders of $100 or more qualify for free shipping when eligible. For orders under $100, shipping costs are calculated at checkout based on destination, package weight, and selected service. International shipping is available for eligible products, and certain items may require additional handling, warehouse transfers, or may ship directly from the manufacturer, which can affect processing time.

Deliveries are handled by preferred carriers such as USPS, UPS, FedEx, DHL, and others depending on your location and selected service. Estimated delivery times are displayed at checkout and may vary due to customs processing, carrier delays, weather, postal disruptions, or other circumstances beyond our control. Once your order ships, you'll receive a confirmation email with tracking information. Tracking may take up to 24 hours to update on the carrier's website and is also available through your account when applicable.

We ship throughout the United States and to most international destinations for products eligible for international shipping. International orders may be subject to customs duties, taxes, brokerage charges, or other import fees, which are the customer's responsibility and are not included in the product or shipping price. PO Boxes are accepted only when shipping through USPS, and not all packages qualify for this option. If your order does not arrive within the estimated delivery window, please contact us at info@apollolighting.com or +1 (954) 375-0100 so we can assist with locating your package.

Learn more.

Returns may be requested within 30 days of receiving your order. Items must be unused, uninstalled, unaltered, and returned in their original packaging with all tags, packing materials, blank warranty cards, manuals, instructions, accessories, and included items. Certain products, including installed or used electronics, electrical components, lighting, consumables, custom or special-order items, cut-to-length products, safety equipment, and merchandise exposed to water or marine conditions, may not be eligible for return.

To request a return, sign in to your account and select the applicable order and items, and submit your request for review. Eligible unfulfilled items may also be submitted for cancellation within 1 hour of placing the order. Returns or cancellations are not considered approved until you receive confirmation from Apollo Lighting. Please do not ship or drop off merchandise before receiving return approval and instructions.

Customers are responsible for arranging and paying for return shipping unless the return is due to an error by Apollo Lighting or the item is verified as defective, damaged, or incorrect. Missing, damaged, defective, or incorrect items must be reported within 2 business days of delivery, and photos or other documentation may be required for review. If the issue is verified, Apollo Lighting may provide or reimburse return shipping and issue a replacement or refund depending on the circumstances. International customers are responsible for return shipping, duties, taxes, customs charges, brokerage fees, and other costs associated with an international return.

After your return is received and inspected, approved refunds are issued to the original payment method and may take 5-7 business days to appear after processing. Original shipping and handling charges are nonrefundable, and the value of any included free items that are not returned may be deducted from the refund. Apollo Lighting does not charge a standard restocking fee on eligible returns. Returns that are incomplete, damaged, installed, used, altered, improperly packaged, or otherwise do not meet the eligibility requirements may be refused. We recommend using a trackable and appropriately insured shipping service for all customer-arranged returns.

For assistance, contact info@apollolighting.com or call +1 (954) 375-0100.

Learn more.

Many products sold by Apollo Lighting include a manufacturer's warranty covering defects in materials or workmanship. Warranty terms vary by brand, product category, and model, so eligibility, coverage duration, exclusions, and available remedies are determined by the applicable manufacturer. We recommend reviewing the warranty information provided with your product before installation or use, especially for marine electronics, navigation equipment, lighting, electrical systems, pumps, safety equipment, and other specialized marine products.

If you need warranty service, the claim must follow the process established by the manufacturer, authorized service center, or designated warranty provider. You may be asked for proof of purchase, a serial number, product registration, photos, maintenance or installation records, or other documentation. Apollo Lighting does not determine or modify a manufacturer's warranty coverage or final claim decision, but we are happy to help provide purchase information and direct you to the appropriate manufacturer or warranty resource.

Keep your receipt, product documentation, serial number information, and original packaging when practical. Damage caused by normal wear, misuse, improper installation, insufficient maintenance, corrosion, impact, unauthorized modifications, electrical issues, or operation outside the manufacturer's specifications may not be covered. Warranty claims are separate from standard returns, so a product that has been installed, used, or exposed to marine conditions may no longer qualify for return while still remaining eligible for evaluation under the manufacturer's applicable warranty.

Learn more.