Lumishore LUX SNL180 Neon Flex LED Strip Light, 300mm, CRGBW, 2700K-6500K Tunable White, IP67

Overview

The Lumishore 010-04410-00 is a 300 mm LUX SNL180 neon flex strip light section that lays down a continuous line of light, with full-spectrum RGB and tunable white from 2700K to 6500K.

It uses a fully encapsulated, spot-free diffuser and carries an IP67 rating for wet areas on board, while remaining intended for above-water installations (not for permanent submersion). The strip is 14.5 mm x 21 mm in cross section and can be side-bent to a 120 mm minimum radius, which helps when following curves under gunwales, along headliners, or under a hardtop.

This strip works as part of the Lumishore LUX Strip Light Driver system, rather than being wired straight to the boat's feed. At the strip, it is rated 5 W per meter and runs on 23 to 25 V DC from the driver output.

Key features

• 300 mm illuminated length (allow about 15 mm at each end for the end caps when planning the run)
• Full-spectrum RGB plus tunable white, with warm white and cold white channels (2700K to 6500K)
• 180 LEDs per meter behind a spot-free diffuser for a continuous look without visible dots
• IP67, fully encapsulated construction for wet areas, with above-water use only
• 14.5 mm x 21 mm profile with a 120 mm minimum bend radius (side-bend only)
• Uses the Lumishore LUX Strip Light Driver system; driver options cover voltage-stabilized 10.5 to 31 V DC supply or non-stabilized 23 to 25 V DC supply
• Control options include a customer-supplied momentary switch or an EOS-LUX Command Center
• UV resistant and salt spray tested, with a 3-year warranty

What's included

• Neon flex strip light section, 300 mm (factory sealed)
• Stainless steel mounting clips

Installation and setup

Mounting is done with the supplied stainless steel clips. Screw the clips down with suitable fasteners for your surface, align the strip with the clips, then press it in until it clicks into place. Use extra clips around tighter bends so the strip stays seated and does not lift over time.

The strip is delivered in premade lengths that are factory sealed to meet IP67 standards, so it should not be cut. Handle it like a flexible extrusion, not a loose rope: do not twist it, and do not bend it in the vertical axis.

Electrical and system integration

Plan on using the correct Lumishore LUX Strip Light Driver module for power and dimming. The strip is not meant to be connected to third-party drivers or lighting control products, and the boat's power source should be isolated before you start wiring.

For many installs, it makes sense to run your control and driver in a dry service space, then route the strip into the lit area with a clean cable path and strain relief. If you are lighting multiple zones, the driver system supports multiple strips up to 10 m total (driver dependent).

Compatibility and fit

This is a good match when you want a smooth line of accent lighting in places where dotted LED tape looks distracting, such as under gunwales, along cabin headliners, inside toe-kicks, or under T-tops. It also works well for refits where you need a consistent, finished look in visible areas.

For fit checks, confirm you have room for the 14.5 mm x 21 mm cross section and that your routing can respect the 120 mm minimum side-bend radius. For locations exposed to sun, it is still worth choosing a mounting position that avoids strong direct sunlight for long periods.

Maintenance and care

Rinse with fresh water after salt exposure and check the clips periodically in high-vibration areas. If the strip ever comes loose at a bend, add a clip nearby rather than forcing a tighter curve.

Orders are processed within 2 business days, which includes verification, packing, and dispatch. Orders of $100 or more qualify for free shipping when eligible. For orders under $100, shipping costs are calculated at checkout based on destination, package weight, and selected service. International shipping is available for eligible products, and certain items may require additional handling, warehouse transfers, or may ship directly from the manufacturer, which can affect processing time.

Deliveries are handled by preferred carriers such as USPS, UPS, FedEx, DHL, and others depending on your location and selected service. Estimated delivery times are displayed at checkout and may vary due to customs processing, carrier delays, weather, postal disruptions, or other circumstances beyond our control. Once your order ships, you'll receive a confirmation email with tracking information. Tracking may take up to 24 hours to update on the carrier's website and is also available through your account when applicable.

We ship throughout the United States and to most international destinations for products eligible for international shipping. International orders may be subject to customs duties, taxes, brokerage charges, or other import fees, which are the customer's responsibility and are not included in the product or shipping price. PO Boxes are accepted only when shipping through USPS, and not all packages qualify for this option. If your order does not arrive within the estimated delivery window, please contact us at info@apollolighting.com or +1 (954) 375-0100 so we can assist with locating your package.

Learn more.

Returns may be requested within 30 days of receiving your order. Items must be unused, uninstalled, unaltered, and returned in their original packaging with all tags, packing materials, blank warranty cards, manuals, instructions, accessories, and included items. Certain products, including installed or used electronics, electrical components, lighting, consumables, custom or special-order items, cut-to-length products, safety equipment, and merchandise exposed to water or marine conditions, may not be eligible for return.

To request a return, sign in to your account and select the applicable order and items, and submit your request for review. Eligible unfulfilled items may also be submitted for cancellation within 1 hour of placing the order. Returns or cancellations are not considered approved until you receive confirmation from Apollo Lighting. Please do not ship or drop off merchandise before receiving return approval and instructions.

Customers are responsible for arranging and paying for return shipping unless the return is due to an error by Apollo Lighting or the item is verified as defective, damaged, or incorrect. Missing, damaged, defective, or incorrect items must be reported within 2 business days of delivery, and photos or other documentation may be required for review. If the issue is verified, Apollo Lighting may provide or reimburse return shipping and issue a replacement or refund depending on the circumstances. International customers are responsible for return shipping, duties, taxes, customs charges, brokerage fees, and other costs associated with an international return.

After your return is received and inspected, approved refunds are issued to the original payment method and may take 5-7 business days to appear after processing. Original shipping and handling charges are nonrefundable, and the value of any included free items that are not returned may be deducted from the refund. Apollo Lighting does not charge a standard restocking fee on eligible returns. Returns that are incomplete, damaged, installed, used, altered, improperly packaged, or otherwise do not meet the eligibility requirements may be refused. We recommend using a trackable and appropriately insured shipping service for all customer-arranged returns.

For assistance, contact info@apollolighting.com or call +1 (954) 375-0100.

Learn more.

Many products sold by Apollo Lighting include a manufacturer's warranty covering defects in materials or workmanship. Warranty terms vary by brand, product category, and model, so eligibility, coverage duration, exclusions, and available remedies are determined by the applicable manufacturer. We recommend reviewing the warranty information provided with your product before installation or use, especially for marine electronics, navigation equipment, lighting, electrical systems, pumps, safety equipment, and other specialized marine products.

If you need warranty service, the claim must follow the process established by the manufacturer, authorized service center, or designated warranty provider. You may be asked for proof of purchase, a serial number, product registration, photos, maintenance or installation records, or other documentation. Apollo Lighting does not determine or modify a manufacturer's warranty coverage or final claim decision, but we are happy to help provide purchase information and direct you to the appropriate manufacturer or warranty resource.

Keep your receipt, product documentation, serial number information, and original packaging when practical. Damage caused by normal wear, misuse, improper installation, insufficient maintenance, corrosion, impact, unauthorized modifications, electrical issues, or operation outside the manufacturer's specifications may not be covered. Warranty claims are separate from standard returns, so a product that has been installed, used, or exposed to marine conditions may no longer qualify for return while still remaining eligible for evaluation under the manufacturer's applicable warranty.

Learn more.