Lumishore LUX SNL180 Neon Flex Strip Light, 1000mm, CRGBW, IP67

Overview

The Lumishore 010-04417-00 is a 1000 mm neon flex LED strip light that gives you a continuous line of light for accents and indirect lighting around the boat. It uses 180 LEDs per meter behind a spot-free diffuser, and it supports full spectrum color plus tunable white from 2700K to 6500K.

The strip is fully sealed to an IP67 rating for above-water installations, so it can be mounted in wet areas and see normal washdowns, but it is not meant for permanent submersion. Plan the run around a minimum 120 mm bend radius, keep bends in the side-to-side direction only, and avoid areas with strong direct sunlight.

Power and control are handled through a compatible LUX Strip Light Driver module. The driver can be operated with momentary switches, or tied into an EOS-LUX Command Center for control from a compatible MFD, depending on the rest of your lighting system.

Key features

• 1000 mm factory-sealed neon flex length; do not cut.
• Full spectrum color plus tunable white in the same strip (2700K to 6500K).
• 180 LEDs per meter with a spot-free diffuser, so you do not see individual LED points.
• IP67 sealed for indoor or outdoor mounting above the waterline; suitable for wet areas but not permanent submersion.
• 5 W per meter power rating for straightforward load planning.
• Works with LUX Strip Light Driver modules; regulated drivers accept 10.5 to 31 V DC input for 12 V and 24 V systems.
• Side-bend only with a 120 mm minimum bend radius; avoid twisting or bending in the vertical axis.
• 14.5 mm x 21 mm cross section with stainless steel screw clips; UV resistant and salt spray tested.

Installation and setup

Mounting is done with stainless steel clips fastened with suitable screws for your surface. Once the clips are aligned, the strip presses into place with a positive click, and adding extra clips around tighter bends helps the strip stay seated.

This neon flex is supplied in premade lengths that are sealed to maintain the IP67 rating, so choose the length you need up front and route it as a complete piece. When handling it, uncoil along the length and avoid pulling, stretching, or dropping the strip during the install.

Electrical and control integration

Connect the strip only to a compatible LUX Strip Light Driver module, then feed the driver from your vessel supply. Switch control can cover on/off, dimming, and preset colors, and an EOS-LUX Command Center can be added when you want multi-zone control and MFD integration using the correct interface accessories for your electronics.

Use cases on board

This style of neon flex fits spots where a clean glow matters, like under-gunwale lighting, cockpit coamings, cabin headliners, helm eyebrow lighting, or step and toe-kick accents. It suits owners who want dockside color scenes and practical white light underway without swapping fixtures.

What's included

• One (1) neon flex strip light, 1000 mm length.
• Stainless steel mounting clips.

Maintenance and care

Rinse with fresh water after heavy salt exposure and wipe with a soft cloth. Periodically check that clips stay tight and the cable route is protected from chafe where it passes through bulkheads or under trim.

Orders are processed within 2 business days, which includes verification, packing, and dispatch. Orders of $100 or more qualify for free shipping when eligible. For orders under $100, shipping costs are calculated at checkout based on destination, package weight, and selected service. International shipping is available for eligible products, and certain items may require additional handling, warehouse transfers, or may ship directly from the manufacturer, which can affect processing time.

Deliveries are handled by preferred carriers such as USPS, UPS, FedEx, DHL, and others depending on your location and selected service. Estimated delivery times are displayed at checkout and may vary due to customs processing, carrier delays, weather, postal disruptions, or other circumstances beyond our control. Once your order ships, you'll receive a confirmation email with tracking information. Tracking may take up to 24 hours to update on the carrier's website and is also available through your account when applicable.

We ship throughout the United States and to most international destinations for products eligible for international shipping. International orders may be subject to customs duties, taxes, brokerage charges, or other import fees, which are the customer's responsibility and are not included in the product or shipping price. PO Boxes are accepted only when shipping through USPS, and not all packages qualify for this option. If your order does not arrive within the estimated delivery window, please contact us at info@apollolighting.com or +1 (954) 375-0100 so we can assist with locating your package.

Learn more.

Returns may be requested within 30 days of receiving your order. Items must be unused, uninstalled, unaltered, and returned in their original packaging with all tags, packing materials, blank warranty cards, manuals, instructions, accessories, and included items. Certain products, including installed or used electronics, electrical components, lighting, consumables, custom or special-order items, cut-to-length products, safety equipment, and merchandise exposed to water or marine conditions, may not be eligible for return.

To request a return, sign in to your account and select the applicable order and items, and submit your request for review. Eligible unfulfilled items may also be submitted for cancellation within 1 hour of placing the order. Returns or cancellations are not considered approved until you receive confirmation from Apollo Lighting. Please do not ship or drop off merchandise before receiving return approval and instructions.

Customers are responsible for arranging and paying for return shipping unless the return is due to an error by Apollo Lighting or the item is verified as defective, damaged, or incorrect. Missing, damaged, defective, or incorrect items must be reported within 2 business days of delivery, and photos or other documentation may be required for review. If the issue is verified, Apollo Lighting may provide or reimburse return shipping and issue a replacement or refund depending on the circumstances. International customers are responsible for return shipping, duties, taxes, customs charges, brokerage fees, and other costs associated with an international return.

After your return is received and inspected, approved refunds are issued to the original payment method and may take 5-7 business days to appear after processing. Original shipping and handling charges are nonrefundable, and the value of any included free items that are not returned may be deducted from the refund. Apollo Lighting does not charge a standard restocking fee on eligible returns. Returns that are incomplete, damaged, installed, used, altered, improperly packaged, or otherwise do not meet the eligibility requirements may be refused. We recommend using a trackable and appropriately insured shipping service for all customer-arranged returns.

For assistance, contact info@apollolighting.com or call +1 (954) 375-0100.

Learn more.

Many products sold by Apollo Lighting include a manufacturer's warranty covering defects in materials or workmanship. Warranty terms vary by brand, product category, and model, so eligibility, coverage duration, exclusions, and available remedies are determined by the applicable manufacturer. We recommend reviewing the warranty information provided with your product before installation or use, especially for marine electronics, navigation equipment, lighting, electrical systems, pumps, safety equipment, and other specialized marine products.

If you need warranty service, the claim must follow the process established by the manufacturer, authorized service center, or designated warranty provider. You may be asked for proof of purchase, a serial number, product registration, photos, maintenance or installation records, or other documentation. Apollo Lighting does not determine or modify a manufacturer's warranty coverage or final claim decision, but we are happy to help provide purchase information and direct you to the appropriate manufacturer or warranty resource.

Keep your receipt, product documentation, serial number information, and original packaging when practical. Damage caused by normal wear, misuse, improper installation, insufficient maintenance, corrosion, impact, unauthorized modifications, electrical issues, or operation outside the manufacturer's specifications may not be covered. Warranty claims are separate from standard returns, so a product that has been installed, used, or exposed to marine conditions may no longer qualify for return while still remaining eligible for evaluation under the manufacturer's applicable warranty.

Learn more.