Lumishore LUX SNL180 Neon Flex Strip Light, LUX Driver Required, CRGBW, 2000mm, IP67, Above-Water

Overview

The Lumishore 010-04427-00 is a LUX SNL180 neon flex LED strip light in a 2000 mm factory-sealed length for above-water accent and courtesy lighting on boats.

It uses a diffuser that blends the LEDs so the light reads as a continuous line instead of a row of dots, which helps when it is in direct view or reflecting off gelcoat, glass, or painted panels. The strip is rated IP67 for wet areas and washdowns, but it is not meant to be permanently submerged.

This strip uses full-spectrum CRGBW lighting with tunable white from 2700K to 6500K, 180 LEDs per meter, and a power rating of 5 W per meter. It runs on 23 to 25 V and is intended to be used with a LUX Strip Light Driver.

Key features

• 2000 mm neon flex strip with a spot-free diffuser for a continuous-looking light line
• Full-spectrum CRGBW output with tunable white from 2700K to 6500K
• IP67 rating for wet areas and washdowns; for above-water applications only
• 180 LEDs per meter and 5 W per meter power rating for planning loads and driver capacity
• Works with a LUX Strip Light Driver; driver options include a voltage-stabilized 10.5 to 31 V DC input model for typical 12 V and 24 V onboard systems
• Fully encapsulated and potted construction, with UV-resistant materials and salt spray testing noted
• 14.5 mm x 21 mm cross section for fitting into coves, under-lips, and recesses where a rigid channel will not sit cleanly

What’s included

• One (1) LUX SNL180 neon flex strip light, 2000 mm

Installation and setup

Plan the run before you start. The strip is delivered as a pre-made, factory-sealed length to meet IP67 standards, so it is not meant to be cut. Leave room for routing at both ends, and avoid sharp corners. The minimum bend radius is 120 mm, and the strip should be side-bent only, without twisting or bending in the vertical axis.

It can be installed indoors, in partially covered areas, or outside in wet zones, but keep it out of strong direct sunlight when possible. For longer lengths, handling is easier with two people so the strip does not kink or twist while you position it.

Electrical and system integration

This strip is intended to run through a LUX Strip Light Driver and should not be connected to third-party lighting drivers. The strip itself operates on 23 to 25 V, while driver options include a voltage-stabilized unit that accepts 10.5 to 31 V DC input from the vessel.

Control can be handled with a customer-supplied momentary switch, or through compatible control hardware in the LUX ecosystem for more advanced color and scene control. Keep driver placement in mind when choosing the mounting location so wiring stays short, dry, and serviceable.

Compatibility and fit

This 2000 mm strip is a good match when you want a continuous light line under gunwales, along toe-kicks, inside cockpit coamings, under T-tops, or along cabin liners where individual LED points would be distracting. If you are working in tight coves or behind trim, use the 14.5 mm x 21 mm cross section and the 120 mm minimum bend radius to confirm it will sit cleanly without stressing the strip.

Maintenance and care

For routine cleaning, rinse salt and grime with fresh water and wipe with a soft cloth. Avoid harsh solvents and do not use abrasion on the diffuser surface. If the strip is installed in a high-splash zone, periodically check the wiring path and mounting points so the strip stays supported and does not chafe from vibration.

Orders are processed within 2 business days, which includes verification, packing, and dispatch. Orders of $100 or more qualify for free shipping when eligible. For orders under $100, shipping costs are calculated at checkout based on destination, package weight, and selected service. International shipping is available for eligible products, and certain items may require additional handling, warehouse transfers, or may ship directly from the manufacturer, which can affect processing time.

Deliveries are handled by preferred carriers such as USPS, UPS, FedEx, DHL, and others depending on your location and selected service. Estimated delivery times are displayed at checkout and may vary due to customs processing, carrier delays, weather, postal disruptions, or other circumstances beyond our control. Once your order ships, you'll receive a confirmation email with tracking information. Tracking may take up to 24 hours to update on the carrier's website and is also available through your account when applicable.

We ship throughout the United States and to most international destinations for products eligible for international shipping. International orders may be subject to customs duties, taxes, brokerage charges, or other import fees, which are the customer's responsibility and are not included in the product or shipping price. PO Boxes are accepted only when shipping through USPS, and not all packages qualify for this option. If your order does not arrive within the estimated delivery window, please contact us at info@apollolighting.com or +1 (954) 375-0100 so we can assist with locating your package.

Learn more.

Returns may be requested within 30 days of receiving your order. Items must be unused, uninstalled, unaltered, and returned in their original packaging with all tags, packing materials, blank warranty cards, manuals, instructions, accessories, and included items. Certain products, including installed or used electronics, electrical components, lighting, consumables, custom or special-order items, cut-to-length products, safety equipment, and merchandise exposed to water or marine conditions, may not be eligible for return.

To request a return, sign in to your account and select the applicable order and items, and submit your request for review. Eligible unfulfilled items may also be submitted for cancellation within 1 hour of placing the order. Returns or cancellations are not considered approved until you receive confirmation from Apollo Lighting. Please do not ship or drop off merchandise before receiving return approval and instructions.

Customers are responsible for arranging and paying for return shipping unless the return is due to an error by Apollo Lighting or the item is verified as defective, damaged, or incorrect. Missing, damaged, defective, or incorrect items must be reported within 2 business days of delivery, and photos or other documentation may be required for review. If the issue is verified, Apollo Lighting may provide or reimburse return shipping and issue a replacement or refund depending on the circumstances. International customers are responsible for return shipping, duties, taxes, customs charges, brokerage fees, and other costs associated with an international return.

After your return is received and inspected, approved refunds are issued to the original payment method and may take 5-7 business days to appear after processing. Original shipping and handling charges are nonrefundable, and the value of any included free items that are not returned may be deducted from the refund. Apollo Lighting does not charge a standard restocking fee on eligible returns. Returns that are incomplete, damaged, installed, used, altered, improperly packaged, or otherwise do not meet the eligibility requirements may be refused. We recommend using a trackable and appropriately insured shipping service for all customer-arranged returns.

For assistance, contact info@apollolighting.com or call +1 (954) 375-0100.

Learn more.

Many products sold by Apollo Lighting include a manufacturer's warranty covering defects in materials or workmanship. Warranty terms vary by brand, product category, and model, so eligibility, coverage duration, exclusions, and available remedies are determined by the applicable manufacturer. We recommend reviewing the warranty information provided with your product before installation or use, especially for marine electronics, navigation equipment, lighting, electrical systems, pumps, safety equipment, and other specialized marine products.

If you need warranty service, the claim must follow the process established by the manufacturer, authorized service center, or designated warranty provider. You may be asked for proof of purchase, a serial number, product registration, photos, maintenance or installation records, or other documentation. Apollo Lighting does not determine or modify a manufacturer's warranty coverage or final claim decision, but we are happy to help provide purchase information and direct you to the appropriate manufacturer or warranty resource.

Keep your receipt, product documentation, serial number information, and original packaging when practical. Damage caused by normal wear, misuse, improper installation, insufficient maintenance, corrosion, impact, unauthorized modifications, electrical issues, or operation outside the manufacturer's specifications may not be covered. Warranty claims are separate from standard returns, so a product that has been installed, used, or exposed to marine conditions may no longer qualify for return while still remaining eligible for evaluation under the manufacturer's applicable warranty.

Learn more.