Raymarine CPT-200 Transducer Extension Cable, 4m

Overview

The Raymarine A80305 is a 4 m extension cable for CPT200 transducer installations. It adds 13.1 ft of cable length, giving more room to route the transducer connection cleanly from the mounting area to compatible Raymarine sonar electronics.

This cable is most useful when the transducer location and the helm or electronics compartment are separated by a longer run than the standard cable allows. On small fishing boats, center consoles, and cruisers, that extra length can help keep the cable path tidy through lockers, under gunwales, behind panels, or around existing wiring without forcing a tight route.

Key features

• 4 m cable length adds 13.1 ft of reach for CPT200 transducer cable runs.
• Made for Raymarine CPT200 transducer installations where additional routing length is needed.
• Helps place electronics and transducer hardware in practical onboard locations without stretching the original cable path.
• Useful for transom and stern-area transducer installations where the display or sonar equipment is mounted farther forward.
• Extension format keeps the installation focused on the correct Raymarine transducer connection rather than a generic cable substitute.

Compatibility and fit

This extension cable is intended for use with the Raymarine CPT200 transducer. It should be matched to that transducer connection, not treated as a universal radar, network, or power cable. Before installation, confirm the transducer model and the available cable path on the vessel so the added 4 m length is enough for the full route without sharp bends or strain at the connectors.

Installation and routing

Route the cable where it will be protected from crushing, chafe, and standing water. Keep the run away from moving steering gear, hatch edges, engine heat, and high-current wiring where practical. Leave a small service loop near the equipment end so the connected electronics can be pulled forward for inspection or service without stressing the cable.

For a cleaner marine installation, secure the cable at regular intervals and avoid pulling on the connector body during routing. Any pass-throughs in bulkheads or panels should be smooth and properly protected so vibration and hull movement do not wear into the cable jacket over time.

Use cases on board

This cable is a good match for boat owners replacing or extending a CPT200 transducer run during a sonar upgrade, helm refit, or transducer relocation. It is also useful when the best transducer position for clean water flow does not line up conveniently with the shortest cable route to the display or sonar module.

Orders are processed within 2 business days, which includes verification, packing, and dispatch. Orders of $100 or more qualify for free shipping when eligible. For orders under $100, shipping costs are calculated at checkout based on destination, package weight, and selected service. International shipping is available for eligible products, and certain items may require additional handling, warehouse transfers, or may ship directly from the manufacturer, which can affect processing time.

Deliveries are handled by preferred carriers such as USPS, UPS, FedEx, DHL, and others depending on your location and selected service. Estimated delivery times are displayed at checkout and may vary due to customs processing, carrier delays, weather, postal disruptions, or other circumstances beyond our control. Once your order ships, you'll receive a confirmation email with tracking information. Tracking may take up to 24 hours to update on the carrier's website and is also available through your account when applicable.

We ship throughout the United States and to most international destinations for products eligible for international shipping. International orders may be subject to customs duties, taxes, brokerage charges, or other import fees, which are the customer's responsibility and are not included in the product or shipping price. PO Boxes are accepted only when shipping through USPS, and not all packages qualify for this option. If your order does not arrive within the estimated delivery window, please contact us at info@apollolighting.com or +1 (954) 375-0100 so we can assist with locating your package.

Learn more.

Returns may be requested within 30 days of receiving your order. Items must be unused, uninstalled, unaltered, and returned in their original packaging with all tags, packing materials, blank warranty cards, manuals, instructions, accessories, and included items. Certain products, including installed or used electronics, electrical components, lighting, consumables, custom or special-order items, cut-to-length products, safety equipment, and merchandise exposed to water or marine conditions, may not be eligible for return.

To request a return, sign in to your account and select the applicable order and items, and submit your request for review. Eligible unfulfilled items may also be submitted for cancellation within 1 hour of placing the order. Returns or cancellations are not considered approved until you receive confirmation from Apollo Lighting. Please do not ship or drop off merchandise before receiving return approval and instructions.

Customers are responsible for arranging and paying for return shipping unless the return is due to an error by Apollo Lighting or the item is verified as defective, damaged, or incorrect. Missing, damaged, defective, or incorrect items must be reported within 2 business days of delivery, and photos or other documentation may be required for review. If the issue is verified, Apollo Lighting may provide or reimburse return shipping and issue a replacement or refund depending on the circumstances. International customers are responsible for return shipping, duties, taxes, customs charges, brokerage fees, and other costs associated with an international return.

After your return is received and inspected, approved refunds are issued to the original payment method and may take 5-7 business days to appear after processing. Original shipping and handling charges are nonrefundable, and the value of any included free items that are not returned may be deducted from the refund. Apollo Lighting does not charge a standard restocking fee on eligible returns. Returns that are incomplete, damaged, installed, used, altered, improperly packaged, or otherwise do not meet the eligibility requirements may be refused. We recommend using a trackable and appropriately insured shipping service for all customer-arranged returns.

For assistance, contact info@apollolighting.com or call +1 (954) 375-0100.

Learn more.

Many products sold by Apollo Lighting include a manufacturer's warranty covering defects in materials or workmanship. Warranty terms vary by brand, product category, and model, so eligibility, coverage duration, exclusions, and available remedies are determined by the applicable manufacturer. We recommend reviewing the warranty information provided with your product before installation or use, especially for marine electronics, navigation equipment, lighting, electrical systems, pumps, safety equipment, and other specialized marine products.

If you need warranty service, the claim must follow the process established by the manufacturer, authorized service center, or designated warranty provider. You may be asked for proof of purchase, a serial number, product registration, photos, maintenance or installation records, or other documentation. Apollo Lighting does not determine or modify a manufacturer's warranty coverage or final claim decision, but we are happy to help provide purchase information and direct you to the appropriate manufacturer or warranty resource.

Keep your receipt, product documentation, serial number information, and original packaging when practical. Damage caused by normal wear, misuse, improper installation, insufficient maintenance, corrosion, impact, unauthorized modifications, electrical issues, or operation outside the manufacturer's specifications may not be covered. Warranty claims are separate from standard returns, so a product that has been installed, used, or exposed to marine conditions may no longer qualify for return while still remaining eligible for evaluation under the manufacturer's applicable warranty.

Learn more.