Lumishore LUX DL50 Downlight, 5W, 10.5-31V DC, IP68, CRGBW, Tunable White 2700K-6500K, Black Bezel

Overview

The Lumishore 010-04447-00 is a LUX DL50 5W downlight with a black bezel for overhead lighting in cabins, cockpits, and other interior or exterior spaces on board. It runs on 10.5 to 31V DC and uses a sealed IP68-rated build that holds up well in wet areas and during washdowns. The bezel face measures 64mm and fits a 50mm cutout, so you can confirm the hole size before you drill or swap an existing light.

Light output can be set to full-color CRGBW and the white tone can be tuned from 2700K to 6500K, which helps when you want warm light in the cabin and cooler task lighting at the helm or galley. Control is handled through the LUX lighting system: it can be run from a momentary switch, and it supports upgrade paths to display-based control when you are building out a fully integrated lighting setup.

Key features

• 5W LUX DL50 downlight with black bezel for overhead mounting
• 10.5 to 31V DC input range to suit typical 12V and 24V onboard systems
• IP68 sealed construction for wet areas and washdowns
• Full spectrum CRGBW color control plus tunable white from 2700K to 6500K
• 64mm bezel diameter with a 50mm cutout requirement for the mounting hole
• Spring-clip retention for quick fitting from the face side of the panel
• Designed for the LUX control ecosystem, supporting momentary-switch control and system expansion

Installation and fit

This light is sized for a 50mm hole and uses spring clips to clamp into place, which works well for hardtops, headliners, and overhead panels where you have limited access. Plan for clean cable routing behind the mounting surface and keep the back of the fitting clear of insulation, wiring bundles, and tight bends.

Electrical and system integration

With a 10.5 to 31V DC operating range, this downlight can be used across mixed-voltage fleets and refits where you may be standardizing on one lighting family. Max current draw is listed as 0.5A / 0.25A (system voltage dependent), which is helpful when you are estimating load for circuits and power distribution. For multi-light installs, keep wiring runs tidy, group lights by zone the way you actually use the boat, and locate control hardware where it stays protected and serviceable.

Use cases on board

This is a solid match for owners upgrading cabin or cockpit downlights where they want one fixture that can do both comfortable warm white and brighter task white, with full-color options available for accent lighting. It also fits well in refits where you are replacing older small downlights and want a sealed fixture for damp head compartments, companionways, or under a hardtop.

What’s included

• One (1) LUX Downlight DL50

Maintenance and care

In saltwater environments, a quick fresh-water rinse after heavy spray or washdowns helps keep the bezel looking clean. When cleaning around the lens, use mild soap and water and avoid abrasive pads that can haze the surface over time.

Orders are processed within 2 business days, which includes verification, packing, and dispatch. Orders of $100 or more qualify for free shipping when eligible. For orders under $100, shipping costs are calculated at checkout based on destination, package weight, and selected service. International shipping is available for eligible products, and certain items may require additional handling, warehouse transfers, or may ship directly from the manufacturer, which can affect processing time.

Deliveries are handled by preferred carriers such as USPS, UPS, FedEx, DHL, and others depending on your location and selected service. Estimated delivery times are displayed at checkout and may vary due to customs processing, carrier delays, weather, postal disruptions, or other circumstances beyond our control. Once your order ships, you'll receive a confirmation email with tracking information. Tracking may take up to 24 hours to update on the carrier's website and is also available through your account when applicable.

We ship throughout the United States and to most international destinations for products eligible for international shipping. International orders may be subject to customs duties, taxes, brokerage charges, or other import fees, which are the customer's responsibility and are not included in the product or shipping price. PO Boxes are accepted only when shipping through USPS, and not all packages qualify for this option. If your order does not arrive within the estimated delivery window, please contact us at info@apollolighting.com or +1 (954) 375-0100 so we can assist with locating your package.

Learn more.

Returns may be requested within 30 days of receiving your order. Items must be unused, uninstalled, unaltered, and returned in their original packaging with all tags, packing materials, blank warranty cards, manuals, instructions, accessories, and included items. Certain products, including installed or used electronics, electrical components, lighting, consumables, custom or special-order items, cut-to-length products, safety equipment, and merchandise exposed to water or marine conditions, may not be eligible for return.

To request a return, sign in to your account and select the applicable order and items, and submit your request for review. Eligible unfulfilled items may also be submitted for cancellation within 1 hour of placing the order. Returns or cancellations are not considered approved until you receive confirmation from Apollo Lighting. Please do not ship or drop off merchandise before receiving return approval and instructions.

Customers are responsible for arranging and paying for return shipping unless the return is due to an error by Apollo Lighting or the item is verified as defective, damaged, or incorrect. Missing, damaged, defective, or incorrect items must be reported within 2 business days of delivery, and photos or other documentation may be required for review. If the issue is verified, Apollo Lighting may provide or reimburse return shipping and issue a replacement or refund depending on the circumstances. International customers are responsible for return shipping, duties, taxes, customs charges, brokerage fees, and other costs associated with an international return.

After your return is received and inspected, approved refunds are issued to the original payment method and may take 5-7 business days to appear after processing. Original shipping and handling charges are nonrefundable, and the value of any included free items that are not returned may be deducted from the refund. Apollo Lighting does not charge a standard restocking fee on eligible returns. Returns that are incomplete, damaged, installed, used, altered, improperly packaged, or otherwise do not meet the eligibility requirements may be refused. We recommend using a trackable and appropriately insured shipping service for all customer-arranged returns.

For assistance, contact info@apollolighting.com or call +1 (954) 375-0100.

Learn more.

Many products sold by Apollo Lighting include a manufacturer's warranty covering defects in materials or workmanship. Warranty terms vary by brand, product category, and model, so eligibility, coverage duration, exclusions, and available remedies are determined by the applicable manufacturer. We recommend reviewing the warranty information provided with your product before installation or use, especially for marine electronics, navigation equipment, lighting, electrical systems, pumps, safety equipment, and other specialized marine products.

If you need warranty service, the claim must follow the process established by the manufacturer, authorized service center, or designated warranty provider. You may be asked for proof of purchase, a serial number, product registration, photos, maintenance or installation records, or other documentation. Apollo Lighting does not determine or modify a manufacturer's warranty coverage or final claim decision, but we are happy to help provide purchase information and direct you to the appropriate manufacturer or warranty resource.

Keep your receipt, product documentation, serial number information, and original packaging when practical. Damage caused by normal wear, misuse, improper installation, insufficient maintenance, corrosion, impact, unauthorized modifications, electrical issues, or operation outside the manufacturer's specifications may not be covered. Warranty claims are separate from standard returns, so a product that has been installed, used, or exposed to marine conditions may no longer qualify for return while still remaining eligible for evaluation under the manufacturer's applicable warranty.

Learn more.