Lumishore LUX SL180 Cut and Seal LED Strip Light, 1000mm, IP68, CRGBW, Tunable White 2700K-6500K, 180 LEDs/m

Overview

The Lumishore 010-04455-00 is a 1000 mm cut-and-seal LED strip light for onboard accent lighting, with full-spectrum CRGBW output (cold white, red, green, blue, warm white) plus tunable white from 2700 K to 6500 K. It carries an IP68 ingress rating and is intended for indoor or outdoor mounting above the waterline.

This strip uses 180 LEDs per meter and is meant to be cut to fit. Cut points are spaced at 100 mm intervals, and the cut end can be sealed so the strip stays watertight. It is dimmable and runs from a strip light driver, with control through a momentary switch and upgrade paths to compatible MFD integration or a dedicated display setup.

Key features

• 1 m (1000 mm) cut-and-seal strip light with cut points every 100 mm
• CRGBW output plus tunable white from 2700 K to 6500 K in the same strip
• 180 LEDs per meter for even light along the run
• IP68-rated strip for above-water installations that see spray and washdowns
• Connectors at both ends for cleaner routing and easier service access
• Adhesive backing and screw-clip mounting method for secure installation on a boat
• Dimmable operation via a strip light driver; multiple strip runs supported up to 10 m total per driver
• UV resistant and salt spray tested for exposed marine spaces

Installation and setup

Plan the run first, including where the driver will live and where you will place strain relief at the ends. For adhesive mounting, prep the surface well so the backing can hold through heat and vibration. In areas that see pounding or frequent cleaning, the screw-clip mounting method helps keep the strip from lifting over time.

If you need a shorter length, cut only at the marked 100 mm cut points. Seal the cut end immediately so moisture cannot wick into the strip, then route the cable so it will not chafe on fiberglass edges, hatch frames, or metal brackets.

Electrical and control notes

This strip light is powered by a strip light driver. Keep the driver in a dry, accessible spot for service, and follow your vessel wiring standards for protection and conductor sizing based on the driver requirements. Control can be as simple as a momentary switch, with options to integrate the lighting into a compatible multifunction display or a dedicated display-style control setup depending on the rest of the system.

Use cases on board

This style of strip works well for toe-kicks, steps, under-gunwale runs, locker lighting, and under-cabinet lines where you want color control and adjustable white for different moods. It is a good match for boats that need above-deck lighting accents that can handle sun exposure and regular spray.

What’s included

• One (1) Lux Cut & Seal Strip Light SL180 (1000 mm)
• Two (2) connectors (one at each end)
• Sealing kit: one (1) tube of silicon adhesive and four (4) end caps

Maintenance and care

Rinse salt off during routine washdowns and avoid aggressive solvents on the strip and adhesive backing. After any cut-and-seal work, recheck the end cap seal once the adhesive has cured, especially if the strip sits in a spot that stays damp from spray.

Orders are processed within 2 business days, which includes verification, packing, and dispatch. Orders of $100 or more qualify for free shipping when eligible. For orders under $100, shipping costs are calculated at checkout based on destination, package weight, and selected service. International shipping is available for eligible products, and certain items may require additional handling, warehouse transfers, or may ship directly from the manufacturer, which can affect processing time.

Deliveries are handled by preferred carriers such as USPS, UPS, FedEx, DHL, and others depending on your location and selected service. Estimated delivery times are displayed at checkout and may vary due to customs processing, carrier delays, weather, postal disruptions, or other circumstances beyond our control. Once your order ships, you'll receive a confirmation email with tracking information. Tracking may take up to 24 hours to update on the carrier's website and is also available through your account when applicable.

We ship throughout the United States and to most international destinations for products eligible for international shipping. International orders may be subject to customs duties, taxes, brokerage charges, or other import fees, which are the customer's responsibility and are not included in the product or shipping price. PO Boxes are accepted only when shipping through USPS, and not all packages qualify for this option. If your order does not arrive within the estimated delivery window, please contact us at info@apollolighting.com or +1 (954) 375-0100 so we can assist with locating your package.

Learn more.

Returns may be requested within 30 days of receiving your order. Items must be unused, uninstalled, unaltered, and returned in their original packaging with all tags, packing materials, blank warranty cards, manuals, instructions, accessories, and included items. Certain products, including installed or used electronics, electrical components, lighting, consumables, custom or special-order items, cut-to-length products, safety equipment, and merchandise exposed to water or marine conditions, may not be eligible for return.

To request a return, sign in to your account and select the applicable order and items, and submit your request for review. Eligible unfulfilled items may also be submitted for cancellation within 1 hour of placing the order. Returns or cancellations are not considered approved until you receive confirmation from Apollo Lighting. Please do not ship or drop off merchandise before receiving return approval and instructions.

Customers are responsible for arranging and paying for return shipping unless the return is due to an error by Apollo Lighting or the item is verified as defective, damaged, or incorrect. Missing, damaged, defective, or incorrect items must be reported within 2 business days of delivery, and photos or other documentation may be required for review. If the issue is verified, Apollo Lighting may provide or reimburse return shipping and issue a replacement or refund depending on the circumstances. International customers are responsible for return shipping, duties, taxes, customs charges, brokerage fees, and other costs associated with an international return.

After your return is received and inspected, approved refunds are issued to the original payment method and may take 5-7 business days to appear after processing. Original shipping and handling charges are nonrefundable, and the value of any included free items that are not returned may be deducted from the refund. Apollo Lighting does not charge a standard restocking fee on eligible returns. Returns that are incomplete, damaged, installed, used, altered, improperly packaged, or otherwise do not meet the eligibility requirements may be refused. We recommend using a trackable and appropriately insured shipping service for all customer-arranged returns.

For assistance, contact info@apollolighting.com or call +1 (954) 375-0100.

Learn more.

Many products sold by Apollo Lighting include a manufacturer's warranty covering defects in materials or workmanship. Warranty terms vary by brand, product category, and model, so eligibility, coverage duration, exclusions, and available remedies are determined by the applicable manufacturer. We recommend reviewing the warranty information provided with your product before installation or use, especially for marine electronics, navigation equipment, lighting, electrical systems, pumps, safety equipment, and other specialized marine products.

If you need warranty service, the claim must follow the process established by the manufacturer, authorized service center, or designated warranty provider. You may be asked for proof of purchase, a serial number, product registration, photos, maintenance or installation records, or other documentation. Apollo Lighting does not determine or modify a manufacturer's warranty coverage or final claim decision, but we are happy to help provide purchase information and direct you to the appropriate manufacturer or warranty resource.

Keep your receipt, product documentation, serial number information, and original packaging when practical. Damage caused by normal wear, misuse, improper installation, insufficient maintenance, corrosion, impact, unauthorized modifications, electrical issues, or operation outside the manufacturer's specifications may not be covered. Warranty claims are separate from standard returns, so a product that has been installed, used, or exposed to marine conditions may no longer qualify for return while still remaining eligible for evaluation under the manufacturer's applicable warranty.

Learn more.