Simrad AP44 Autopilot Installation Kit

Overview

The Simrad 000-13951-001 is an installation kit for the AP44 autopilot control head, used when mounting an AP44 at the helm or replacing the original installation hardware.

It fits the Simrad AP44 only. This is a mounting accessory and does not include the AP44 control head itself or any autopilot computer, drive unit, compass, or cabling for the rest of the system.

On boats that see regular vibration, spray, and washdowns, having the correct install parts matters for keeping the control head tight in the panel so the keypad and screen stay easy to use underway.

Key features

• Made for mounting the Simrad AP44 autopilot control head (AP44 only)
• Useful for new installs and for replacing missing or damaged install parts during a refit
• Helps keep the control head seated correctly so it stays secure when the boat pounds in chop
• Restores a clean fit around the dash or pod cutout at the helm
• Accessory kit only; it does not replace the AP44 control head or other autopilot components

Compatibility and fit

Confirm your control head is labeled AP44 before ordering. This kit is not intended for other Simrad control head sizes or different display families, even if the connectors on the back look similar.

Installation and setup

Plan the mounting location so the display is easy to see from your normal steering position and there is room behind the panel for the cable to bend gently without being kinked. Disconnect power to the autopilot electronics before removing or reinstalling the control head.

If the AP44 is mounted where it can get spray, keep the cutout and surrounding surface clean and use proper sealing practices for exterior panels. Route the cable with a drip loop so water does not track along the cable into the dash.

Use cases on board

This kit is a good match for helm refits, electronics pod rebuilds, or service work where an AP44 needs to come out and go back in cleanly. It is also useful when restoring an older install where the original mounting parts have been lost over time.

Maintenance and care

Rinse salt residue from the helm area and avoid strong solvents around the face of the unit. After the first few trips, re-check that the control head is still snug in the panel, especially on boats that run offshore or spend time in steep chop.

Orders are processed within 2 business days, which includes verification, packing, and dispatch. Orders of $100 or more qualify for free shipping when eligible. For orders under $100, shipping costs are calculated at checkout based on destination, package weight, and selected service. International shipping is available for eligible products, and certain items may require additional handling, warehouse transfers, or may ship directly from the manufacturer, which can affect processing time.

Deliveries are handled by preferred carriers such as USPS, UPS, FedEx, DHL, and others depending on your location and selected service. Estimated delivery times are displayed at checkout and may vary due to customs processing, carrier delays, weather, postal disruptions, or other circumstances beyond our control. Once your order ships, you'll receive a confirmation email with tracking information. Tracking may take up to 24 hours to update on the carrier's website and is also available through your account when applicable.

We ship throughout the United States and to most international destinations for products eligible for international shipping. International orders may be subject to customs duties, taxes, brokerage charges, or other import fees, which are the customer's responsibility and are not included in the product or shipping price. PO Boxes are accepted only when shipping through USPS, and not all packages qualify for this option. If your order does not arrive within the estimated delivery window, please contact us at info@apollolighting.com or +1 (954) 375-0100 so we can assist with locating your package.

Learn more.

Returns may be requested within 30 days of receiving your order. Items must be unused, uninstalled, unaltered, and returned in their original packaging with all tags, packing materials, blank warranty cards, manuals, instructions, accessories, and included items. Certain products, including installed or used electronics, electrical components, lighting, consumables, custom or special-order items, cut-to-length products, safety equipment, and merchandise exposed to water or marine conditions, may not be eligible for return.

To request a return, sign in to your account and select the applicable order and items, and submit your request for review. Eligible unfulfilled items may also be submitted for cancellation within 1 hour of placing the order. Returns or cancellations are not considered approved until you receive confirmation from Apollo Lighting. Please do not ship or drop off merchandise before receiving return approval and instructions.

Customers are responsible for arranging and paying for return shipping unless the return is due to an error by Apollo Lighting or the item is verified as defective, damaged, or incorrect. Missing, damaged, defective, or incorrect items must be reported within 2 business days of delivery, and photos or other documentation may be required for review. If the issue is verified, Apollo Lighting may provide or reimburse return shipping and issue a replacement or refund depending on the circumstances. International customers are responsible for return shipping, duties, taxes, customs charges, brokerage fees, and other costs associated with an international return.

After your return is received and inspected, approved refunds are issued to the original payment method and may take 5-7 business days to appear after processing. Original shipping and handling charges are nonrefundable, and the value of any included free items that are not returned may be deducted from the refund. Apollo Lighting does not charge a standard restocking fee on eligible returns. Returns that are incomplete, damaged, installed, used, altered, improperly packaged, or otherwise do not meet the eligibility requirements may be refused. We recommend using a trackable and appropriately insured shipping service for all customer-arranged returns.

For assistance, contact info@apollolighting.com or call +1 (954) 375-0100.

Learn more.

Many products sold by Apollo Lighting include a manufacturer's warranty covering defects in materials or workmanship. Warranty terms vary by brand, product category, and model, so eligibility, coverage duration, exclusions, and available remedies are determined by the applicable manufacturer. We recommend reviewing the warranty information provided with your product before installation or use, especially for marine electronics, navigation equipment, lighting, electrical systems, pumps, safety equipment, and other specialized marine products.

If you need warranty service, the claim must follow the process established by the manufacturer, authorized service center, or designated warranty provider. You may be asked for proof of purchase, a serial number, product registration, photos, maintenance or installation records, or other documentation. Apollo Lighting does not determine or modify a manufacturer's warranty coverage or final claim decision, but we are happy to help provide purchase information and direct you to the appropriate manufacturer or warranty resource.

Keep your receipt, product documentation, serial number information, and original packaging when practical. Damage caused by normal wear, misuse, improper installation, insufficient maintenance, corrosion, impact, unauthorized modifications, electrical issues, or operation outside the manufacturer's specifications may not be covered. Warranty claims are separate from standard returns, so a product that has been installed, used, or exposed to marine conditions may no longer qualify for return while still remaining eligible for evaluation under the manufacturer's applicable warranty.

Learn more.