Skip to content

Free shipping over $100. Learn more.

Free 30-days returns. Learn more.

Give us a call at 954-375-0100!

Account Cart

Shop all Lumishore

Lumishore LUX SL180 Cut & Seal LED Strip Light, CRGBW, IP68, 5000mm

SKU: APL672076 Part number: 010-04457-00

Regular price $299.99 USD

Ships free. Expected to arrive between and .

Only 2 left

Description

Overview

The Lumishore 010-04457-00 is a 5 m cut-and-seal LUX SL180 LED strip light that gives you full-color CRGBW plus tunable white from 2700K to 6500K in the same run. It uses 180 LEDs per meter and a fully encapsulated IP68-rated build for above-water installs where spray and washdowns are normal.

This strip is meant to be powered through a LUX Strip Light Driver and runs on 23 to 25 V DC at the strip, with a load of about 5 W per meter. On board, it fits the common jobs for strip lighting like under-gunwale glow, cockpit seating accents, toe-kicks, lockers, steps, and cabin coves, where you want color at anchor and a clean adjustable white for moving around after dark.

Key features
  • 5 m (5000 mm) strip that can be cut in 100 mm steps and sealed after cutting
  • CRGBW output plus tunable white in the same strip (2700K to 6500K)
  • 180 LEDs per meter for even light along long runs
  • IP68-rated, fully encapsulated and potted construction for above-water locations
  • Electrical load of about 5 W per meter; 23 to 25 V DC at the strip through a LUX Strip Light Driver
  • UV resistant and salt spray tested for marine exposure
  • Adhesive backing with the option to add mechanical fastening in wet zones, tight curves, or vibration-prone areas
What’s included
  • One Lux Cut and Seal Strip Light SL180 (5 m / 5000 mm)
  • Two connectors, one fitted at each end
  • Sealing kit with silicone adhesive and four end caps
Compatibility and fit

The strip has a low-profile cross section of about 14.5 mm by 5 mm, which helps it tuck into channels, under coamings, and behind trim. Plan your route so the strip can bend only in the vertical axis, with a minimum bend radius of 50 mm, and avoid twisting or bending it sideways around corners.

For control, setups commonly use a customer-supplied momentary switch, and can also be integrated through an EOS-LUX Command Center. Driver options include voltage-stabilized models that accept 10.5 to 31 V DC, and 23 to 25 V DC driver options, while the strip itself is the 23 to 25 V load.

Installation and setup

Dry-fit the run before cutting, then cut only at the marked cut points and seal the cut end with the supplied kit. Give the sealant time to cure fully before handling the strip in a wet environment.

For mounting, clean the surface thoroughly, apply the adhesive backing, and press the strip into place. In outdoor areas, wet spaces, or anywhere that sees vibration, add mechanical fastening and support the strip regularly along the run.

On-board use

This strip makes sense for boats that want one lighting run to handle both color accents and adjustable white, without adding separate strips for each look. It is a good match for cockpit and cabin accent lighting, steps, lockers, and other above-water zones where you want a finished look that stays tidy in a marine environment.

Specifications

Color Temperature
6500K
LED's per meter
180 pcs
Lens Type
Acrylic Lens
Light Color
CRGBW
Light Type
LED
Lumens
N/A
Product Color
Translucent
Product Material
Acrylic
Product Type
Strip Light
Degree of Protection
IP68
Electric Current (Power)
Direct Current (DC)
Operating Voltage
23-25V
Power Consumption
N/A

Reviews (0)

Shipping and delivery

Orders are processed within 2 business days, which includes verification, packing, and dispatch. Orders of $100 or more qualify for free shipping when eligible. For orders under $100, shipping costs are calculated at checkout based on destination, package weight, and selected service. International shipping is available for eligible products, and certain items may require additional handling, warehouse transfers, or may ship directly from the manufacturer, which can affect processing time.

Deliveries are handled by preferred carriers such as USPS, UPS, FedEx, DHL, and others depending on your location and selected service. Estimated delivery times are displayed at checkout and may vary due to customs processing, carrier delays, weather, postal disruptions, or other circumstances beyond our control. Once your order ships, you'll receive a confirmation email with tracking information. Tracking may take up to 24 hours to update on the carrier's website and is also available through your account when applicable.

We ship throughout the United States and to most international destinations for products eligible for international shipping. International orders may be subject to customs duties, taxes, brokerage charges, or other import fees, which are the customer's responsibility and are not included in the product or shipping price. PO Boxes are accepted only when shipping through USPS, and not all packages qualify for this option. If your order does not arrive within the estimated delivery window, please contact us at info@apollolighting.com or +1 (954) 375-0100 so we can assist with locating your package.

Learn more.

Returns and refunds

Returns may be requested within 30 days of receiving your order. Items must be unused, uninstalled, unaltered, and returned in their original packaging with all tags, packing materials, blank warranty cards, manuals, instructions, accessories, and included items. Certain products, including installed or used electronics, electrical components, lighting, consumables, custom or special-order items, cut-to-length products, safety equipment, and merchandise exposed to water or marine conditions, may not be eligible for return.

To request a return, sign in to your account and select the applicable order and items, and submit your request for review. Eligible unfulfilled items may also be submitted for cancellation within 1 hour of placing the order. Returns or cancellations are not considered approved until you receive confirmation from Apollo Lighting. Please do not ship or drop off merchandise before receiving return approval and instructions.

Customers are responsible for arranging and paying for return shipping unless the return is due to an error by Apollo Lighting or the item is verified as defective, damaged, or incorrect. Missing, damaged, defective, or incorrect items must be reported within 2 business days of delivery, and photos or other documentation may be required for review. If the issue is verified, Apollo Lighting may provide or reimburse return shipping and issue a replacement or refund depending on the circumstances. International customers are responsible for return shipping, duties, taxes, customs charges, brokerage fees, and other costs associated with an international return.

After your return is received and inspected, approved refunds are issued to the original payment method and may take 5-7 business days to appear after processing. Original shipping and handling charges are nonrefundable, and the value of any included free items that are not returned may be deducted from the refund. Apollo Lighting does not charge a standard restocking fee on eligible returns. Returns that are incomplete, damaged, installed, used, altered, improperly packaged, or otherwise do not meet the eligibility requirements may be refused. We recommend using a trackable and appropriately insured shipping service for all customer-arranged returns.

For assistance, contact info@apollolighting.com or call +1 (954) 375-0100.

Learn more.

Product warranty

Many products sold by Apollo Lighting include a manufacturer's warranty covering defects in materials or workmanship. Warranty terms vary by brand, product category, and model, so eligibility, coverage duration, exclusions, and available remedies are determined by the applicable manufacturer. We recommend reviewing the warranty information provided with your product before installation or use, especially for marine electronics, navigation equipment, lighting, electrical systems, pumps, safety equipment, and other specialized marine products.

If you need warranty service, the claim must follow the process established by the manufacturer, authorized service center, or designated warranty provider. You may be asked for proof of purchase, a serial number, product registration, photos, maintenance or installation records, or other documentation. Apollo Lighting does not determine or modify a manufacturer's warranty coverage or final claim decision, but we are happy to help provide purchase information and direct you to the appropriate manufacturer or warranty resource.

Keep your receipt, product documentation, serial number information, and original packaging when practical. Damage caused by normal wear, misuse, improper installation, insufficient maintenance, corrosion, impact, unauthorized modifications, electrical issues, or operation outside the manufacturer's specifications may not be covered. Warranty claims are separate from standard returns, so a product that has been installed, used, or exposed to marine conditions may no longer qualify for return while still remaining eligible for evaluation under the manufacturer's applicable warranty.

Learn more.

Your cart

Your cart is empty

Choose options