Lumishore LUX 4 in LED Flood Light, CRGBW Color Change, 2700K-6500K Tunable White, White Finish, 10.5-31V DC, IP68, 1,050 Fixture Lumens, 70-90° Oval Beam

Overview

The Lumishore 010-04459-00 is a 4 inch above-water CRGBW LED flood light in a white finish that covers working white light and full color accent lighting from the same fixture.

It runs on 10.5 to 31 V DC for 12 V and 24 V boats, draws up to 1.7 A at 12 V (0.9 A at 24 V), and is rated at 1,050 fixture lumens in white with a 70 to 90 degree oval beam. The housing is IP68, with a powder-coated aluminium body, a frosted lens, and a single stainless steel fixing bracket.

Control is handled through the LUX lighting system. The light connects to a LUX light control module using a simple three wire harness (power, ground, data), and color or dimming can be managed from an EOS-LUX command center or a customer supplied momentary switch.

Key features

• CRGBW output with tunable white from 2700K to 6500K plus full spectrum RGB color
• 10.5 to 31 V DC input for 12 V and 24 V electrical systems
• 1,050 fixture lumens (white) with a 70 to 90 degree oval beam
• IP68 ingress rating for exposed mounting locations above the waterline
• Powder-coated aluminium housing with frosted lens and stainless steel fixing bracket
• 35 cm (13.8 in) light cable for a short, tidy run to the control module
• Three wire connection: red power, black ground, yellow data
• One LUX light control module supports up to five flood lights, with larger systems expandable up to 16 lights
• Reverse polarity protection and 3,000 V surge protection built into the electronics
• 3 year warranty

Installation and setup

Mount the bracket on a flat, solid surface where the light can aim across the work area without being shaded by rails or antennas. The bracket uses a 6.5 mm hole sized for an M6 bolt, and the cable pass-through hole is 6 mm. Keep the cable fixed so it cannot twist at the entry.

Seal the cable entry and use a cable gland when the wiring drops into a hardtop, coaming, or transom void. When fastening the light to the stainless bracket, place the nylon washers against the bracket and tighten to 5 Nm to avoid crushing the hardware.

Electrical and system integration

This light is not a stand-alone lamp on a simple two wire switch. It must be connected to a LUX light control module, and each lighting circuit should be fused appropriately for the wiring used. Wiring should follow ABYC guidelines, and all grounds should return to a common ground point with the module.

On boats with multiple flood lights, keep the module count in mind: up to five lights can share one module, and larger installs can be split across modules up to a total of 16 lights. Bonding is not required for the fixture.

Dimensions and mounting considerations

Overall size with the bracket is 10.6 x 4.5 x 5.8 cm (4.20 x 1.77 x 2.29 in), and the light weighs about 250 g (0.5 lb). The short 35 cm lead is meant to land close to the control module, so plan the module location early if you are wiring through an overhead, arch, or cockpit coaming.

Use on board

For docking and deck work, tunable white lets you keep the tone warm around the cockpit or push it cooler when you want more contrast for cleanup. The RGB channels are useful for low glare ambience at anchor or for matching other LUX lighting zones without adding separate accent lights.

This is a good match for boats that already run the LUX lighting system and want a compact flood light for a hardtop, T-top, arch, or aft-facing mount above the waterline.

Maintenance and care

Wash salt off with fresh water and clean the lens with soap and water using a soft cloth. Avoid chemical cleaners and do not power wash the fixture. Inspect the bracket hardware and cable entry as part of routine washdowns, especially on boats that see heavy spray.

Orders are processed within 2 business days, which includes verification, packing, and dispatch. Orders of $100 or more qualify for free shipping when eligible. For orders under $100, shipping costs are calculated at checkout based on destination, package weight, and selected service. International shipping is available for eligible products, and certain items may require additional handling, warehouse transfers, or may ship directly from the manufacturer, which can affect processing time.

Deliveries are handled by preferred carriers such as USPS, UPS, FedEx, DHL, and others depending on your location and selected service. Estimated delivery times are displayed at checkout and may vary due to customs processing, carrier delays, weather, postal disruptions, or other circumstances beyond our control. Once your order ships, you'll receive a confirmation email with tracking information. Tracking may take up to 24 hours to update on the carrier's website and is also available through your account when applicable.

We ship throughout the United States and to most international destinations for products eligible for international shipping. International orders may be subject to customs duties, taxes, brokerage charges, or other import fees, which are the customer's responsibility and are not included in the product or shipping price. PO Boxes are accepted only when shipping through USPS, and not all packages qualify for this option. If your order does not arrive within the estimated delivery window, please contact us at info@apollolighting.com or +1 (954) 375-0100 so we can assist with locating your package.

Learn more.

Returns may be requested within 30 days of receiving your order. Items must be unused, uninstalled, unaltered, and returned in their original packaging with all tags, packing materials, blank warranty cards, manuals, instructions, accessories, and included items. Certain products, including installed or used electronics, electrical components, lighting, consumables, custom or special-order items, cut-to-length products, safety equipment, and merchandise exposed to water or marine conditions, may not be eligible for return.

To request a return, sign in to your account and select the applicable order and items, and submit your request for review. Eligible unfulfilled items may also be submitted for cancellation within 1 hour of placing the order. Returns or cancellations are not considered approved until you receive confirmation from Apollo Lighting. Please do not ship or drop off merchandise before receiving return approval and instructions.

Customers are responsible for arranging and paying for return shipping unless the return is due to an error by Apollo Lighting or the item is verified as defective, damaged, or incorrect. Missing, damaged, defective, or incorrect items must be reported within 2 business days of delivery, and photos or other documentation may be required for review. If the issue is verified, Apollo Lighting may provide or reimburse return shipping and issue a replacement or refund depending on the circumstances. International customers are responsible for return shipping, duties, taxes, customs charges, brokerage fees, and other costs associated with an international return.

After your return is received and inspected, approved refunds are issued to the original payment method and may take 5-7 business days to appear after processing. Original shipping and handling charges are nonrefundable, and the value of any included free items that are not returned may be deducted from the refund. Apollo Lighting does not charge a standard restocking fee on eligible returns. Returns that are incomplete, damaged, installed, used, altered, improperly packaged, or otherwise do not meet the eligibility requirements may be refused. We recommend using a trackable and appropriately insured shipping service for all customer-arranged returns.

For assistance, contact info@apollolighting.com or call +1 (954) 375-0100.

Learn more.

Many products sold by Apollo Lighting include a manufacturer's warranty covering defects in materials or workmanship. Warranty terms vary by brand, product category, and model, so eligibility, coverage duration, exclusions, and available remedies are determined by the applicable manufacturer. We recommend reviewing the warranty information provided with your product before installation or use, especially for marine electronics, navigation equipment, lighting, electrical systems, pumps, safety equipment, and other specialized marine products.

If you need warranty service, the claim must follow the process established by the manufacturer, authorized service center, or designated warranty provider. You may be asked for proof of purchase, a serial number, product registration, photos, maintenance or installation records, or other documentation. Apollo Lighting does not determine or modify a manufacturer's warranty coverage or final claim decision, but we are happy to help provide purchase information and direct you to the appropriate manufacturer or warranty resource.

Keep your receipt, product documentation, serial number information, and original packaging when practical. Damage caused by normal wear, misuse, improper installation, insufficient maintenance, corrosion, impact, unauthorized modifications, electrical issues, or operation outside the manufacturer's specifications may not be covered. Warranty claims are separate from standard returns, so a product that has been installed, used, or exposed to marine conditions may no longer qualify for return while still remaining eligible for evaluation under the manufacturer's applicable warranty.

Learn more.