Lumishore ECLIPSE CL30 LED Courtesy Light, Blue Light, 12V, IP67, Panel-Mount

Overview

The Lumishore 010-04468-00 is a flush-mount LED courtesy light that adds blue step lighting in places like companionways, cockpits, and helm footrests without throwing glare across the deck. It runs on 12V DC systems only (10 to 15V DC) and draws up to 0.1A, so it is easy to add to an existing lighting circuit.

The light uses 3 x 0.5W blue LEDs and produces about 45 fixture lumens. The bezel is 33mm (1.3 in) across with a 30mm (1.18 in) mounting depth, and it is fully sealed for indoor spaces and outdoor wet areas, but it is not meant to be permanently submerged.

Key features

• Blue single-color courtesy light output (3 x 0.5W LEDs, about 45 fixture lumens).
• 12V DC only operation (10 to 15V DC) with up to 0.1A draw.
• Two-wire hookup with an internal driver, plus protection for common onboard electrical faults (reverse polarity, low-voltage, surge).
• Flush bulkhead or panel mounting with a 33mm (1.3 in) bezel and 30mm (1.18 in) depth behind the panel.
• Designed around a nominal 1 in bulkhead cutout (about 22.5 to 23mm) for an easy retrofit.
• Suitable for indoor spaces and outdoor wet areas; not intended for permanent submersion.
• Works with a simple On/Off switch or with an ECLIPSE Command Center for dimming and zone control.
• Ignition protected to ISO 8846 for use around gasoline fumes when installed correctly.

Installation and setup

Mount on a flat surface so the lens seals evenly. A snug mechanical fit matters, so cutting slightly undersize and filing to final size helps the retaining hardware seat properly behind the panel.

Use clear marine sealant between the lens and the mounting surface, and between the retaining nut and the back of the panel. Wire red to a fused positive feed and black to DC negative. When stringing multiple lights, size the cable to keep voltage drop under 3% to the last light.

Control options

On a basic switch circuit, the light can be dimmed by toggling the switch. Turning the switch off for about 2 seconds resets it back to full output the next time it is powered.

With an ECLIPSE Command Center, the light can be grouped into zones for on/off and dimming control from compatible interfaces. It should not be connected to third-party lighting controllers or dimmers.

Use cases on board

This style of blue courtesy lighting is commonly used to mark steps, toe-kicks, and passageways where preserving night vision matters on night runs. The low current draw also makes it practical for leaving on while boarding at the dock or moving around at anchor.

Maintenance and care

Rinse with fresh water after washdowns and clean with mild soap and water. Avoid chemical cleaners on the lens and around the seal areas.

Orders are processed within 2 business days, which includes verification, packing, and dispatch. Orders of $100 or more qualify for free shipping when eligible. For orders under $100, shipping costs are calculated at checkout based on destination, package weight, and selected service. International shipping is available for eligible products, and certain items may require additional handling, warehouse transfers, or may ship directly from the manufacturer, which can affect processing time.

Deliveries are handled by preferred carriers such as USPS, UPS, FedEx, DHL, and others depending on your location and selected service. Estimated delivery times are displayed at checkout and may vary due to customs processing, carrier delays, weather, postal disruptions, or other circumstances beyond our control. Once your order ships, you'll receive a confirmation email with tracking information. Tracking may take up to 24 hours to update on the carrier's website and is also available through your account when applicable.

We ship throughout the United States and to most international destinations for products eligible for international shipping. International orders may be subject to customs duties, taxes, brokerage charges, or other import fees, which are the customer's responsibility and are not included in the product or shipping price. PO Boxes are accepted only when shipping through USPS, and not all packages qualify for this option. If your order does not arrive within the estimated delivery window, please contact us at info@apollolighting.com or +1 (954) 375-0100 so we can assist with locating your package.

Learn more.

Returns may be requested within 30 days of receiving your order. Items must be unused, uninstalled, unaltered, and returned in their original packaging with all tags, packing materials, blank warranty cards, manuals, instructions, accessories, and included items. Certain products, including installed or used electronics, electrical components, lighting, consumables, custom or special-order items, cut-to-length products, safety equipment, and merchandise exposed to water or marine conditions, may not be eligible for return.

To request a return, sign in to your account and select the applicable order and items, and submit your request for review. Eligible unfulfilled items may also be submitted for cancellation within 1 hour of placing the order. Returns or cancellations are not considered approved until you receive confirmation from Apollo Lighting. Please do not ship or drop off merchandise before receiving return approval and instructions.

Customers are responsible for arranging and paying for return shipping unless the return is due to an error by Apollo Lighting or the item is verified as defective, damaged, or incorrect. Missing, damaged, defective, or incorrect items must be reported within 2 business days of delivery, and photos or other documentation may be required for review. If the issue is verified, Apollo Lighting may provide or reimburse return shipping and issue a replacement or refund depending on the circumstances. International customers are responsible for return shipping, duties, taxes, customs charges, brokerage fees, and other costs associated with an international return.

After your return is received and inspected, approved refunds are issued to the original payment method and may take 5-7 business days to appear after processing. Original shipping and handling charges are nonrefundable, and the value of any included free items that are not returned may be deducted from the refund. Apollo Lighting does not charge a standard restocking fee on eligible returns. Returns that are incomplete, damaged, installed, used, altered, improperly packaged, or otherwise do not meet the eligibility requirements may be refused. We recommend using a trackable and appropriately insured shipping service for all customer-arranged returns.

For assistance, contact info@apollolighting.com or call +1 (954) 375-0100.

Learn more.

Many products sold by Apollo Lighting include a manufacturer's warranty covering defects in materials or workmanship. Warranty terms vary by brand, product category, and model, so eligibility, coverage duration, exclusions, and available remedies are determined by the applicable manufacturer. We recommend reviewing the warranty information provided with your product before installation or use, especially for marine electronics, navigation equipment, lighting, electrical systems, pumps, safety equipment, and other specialized marine products.

If you need warranty service, the claim must follow the process established by the manufacturer, authorized service center, or designated warranty provider. You may be asked for proof of purchase, a serial number, product registration, photos, maintenance or installation records, or other documentation. Apollo Lighting does not determine or modify a manufacturer's warranty coverage or final claim decision, but we are happy to help provide purchase information and direct you to the appropriate manufacturer or warranty resource.

Keep your receipt, product documentation, serial number information, and original packaging when practical. Damage caused by normal wear, misuse, improper installation, insufficient maintenance, corrosion, impact, unauthorized modifications, electrical issues, or operation outside the manufacturer's specifications may not be covered. Warranty claims are separate from standard returns, so a product that has been installed, used, or exposed to marine conditions may no longer qualify for return while still remaining eligible for evaluation under the manufacturer's applicable warranty.

Learn more.