Lopolight LED Tri-Color Navigation Light, 1NM, FB Flat Base, 10-32VDC, IP68

Overview

This Lopolight tri-color navigation light is a masthead unit for sailboats under 12 m, providing 1 NM visibility with separate red (112.5°), green (112.5°), and white (135°) sectors. It runs on 10 to 32 VDC, is sealed to IP68, and mounts horizontally on an FB flat base with a Ø92.5 mm footprint.

The light is built around an anodized aluminum housing with an acrylic lens, with the interior potted to handle vibration and keep water out. A 0.75 m pre-attached marine cable is provided, with red for positive and black for ground, plus a screened jacket for cleaner routing up a mast.

Key features

• 1 NM tri-color masthead light for boats under 12 m, with sector coverage of 112.5° green, 112.5° red, and 135° white
• 10 to 32 VDC input for common 12 V and 24 V systems
• IP68 sealing for rain, spray, and washdowns
• FB flat base with Ø92.5 mm outside diameter and 3 mounting points; can be fastened from the top or from the underside depending on access
• Pre-cabled with 0.75 m marine cable with screen; red is positive and black is ground
• Anodized finish options: 20µ silver anodized or 50µ black anodized

Variants

This light is offered in multiple configurations that share the same tri-color function and FB flat-base mounting style.

The finish changes between variants (silver anodized or black anodized); fit and wiring approach remain the same.

• 101-005-FB: Finish Silver. A bright anodized look that pairs well with aluminum spars and stainless deck hardware.
• 101-005-FB-B: Finish Black. A darker anodized look that stays visually low-profile on black masts and modern rigging packages.

Installation and setup

Mount this light at the masthead where it has a clear view of the horizon and is not shadowed by antennas, wind instruments, or backstays. The FB base allows fastening from above with three holes, or from below using threaded mounting points, which helps when you want a clean top surface and can reach the underside.

On deck, bed the base properly and route the cable through a sealed gland or spar conduit so water cannot track down the wire. Align the light carefully to the vessel centerline so the red and green sectors show correctly to port and starboard.

Electrical and system integration

This unit is a straightforward two-wire DC connection: red to switched positive and black to DC negative, with the screened cable helping reduce noise pickup in long mast runs. It is typically wired to a dedicated navigation-light switch position so the tri-color masthead light is used in the correct operating mode for your setup.

What’s included

• 1 tri-color navigation light with FB flat base
• 0.75 m pre-attached marine cable
• Installation instructions

Orders are processed within 2 business days, which includes verification, packing, and dispatch. Orders of $100 or more qualify for free shipping when eligible. For orders under $100, shipping costs are calculated at checkout based on destination, package weight, and selected service. International shipping is available for eligible products, and certain items may require additional handling, warehouse transfers, or may ship directly from the manufacturer, which can affect processing time.

Deliveries are handled by preferred carriers such as USPS, UPS, FedEx, DHL, and others depending on your location and selected service. Estimated delivery times are displayed at checkout and may vary due to customs processing, carrier delays, weather, postal disruptions, or other circumstances beyond our control. Once your order ships, you'll receive a confirmation email with tracking information. Tracking may take up to 24 hours to update on the carrier's website and is also available through your account when applicable.

We ship throughout the United States and to most international destinations for products eligible for international shipping. International orders may be subject to customs duties, taxes, brokerage charges, or other import fees, which are the customer's responsibility and are not included in the product or shipping price. PO Boxes are accepted only when shipping through USPS, and not all packages qualify for this option. If your order does not arrive within the estimated delivery window, please contact us at info@apollolighting.com or +1 (954) 375-0100 so we can assist with locating your package.

Learn more.

Returns may be requested within 30 days of receiving your order. Items must be unused, uninstalled, unaltered, and returned in their original packaging with all tags, packing materials, blank warranty cards, manuals, instructions, accessories, and included items. Certain products, including installed or used electronics, electrical components, lighting, consumables, custom or special-order items, cut-to-length products, safety equipment, and merchandise exposed to water or marine conditions, may not be eligible for return.

To request a return, sign in to your account and select the applicable order and items, and submit your request for review. Eligible unfulfilled items may also be submitted for cancellation within 1 hour of placing the order. Returns or cancellations are not considered approved until you receive confirmation from Apollo Lighting. Please do not ship or drop off merchandise before receiving return approval and instructions.

Customers are responsible for arranging and paying for return shipping unless the return is due to an error by Apollo Lighting or the item is verified as defective, damaged, or incorrect. Missing, damaged, defective, or incorrect items must be reported within 2 business days of delivery, and photos or other documentation may be required for review. If the issue is verified, Apollo Lighting may provide or reimburse return shipping and issue a replacement or refund depending on the circumstances. International customers are responsible for return shipping, duties, taxes, customs charges, brokerage fees, and other costs associated with an international return.

After your return is received and inspected, approved refunds are issued to the original payment method and may take 5-7 business days to appear after processing. Original shipping and handling charges are nonrefundable, and the value of any included free items that are not returned may be deducted from the refund. Apollo Lighting does not charge a standard restocking fee on eligible returns. Returns that are incomplete, damaged, installed, used, altered, improperly packaged, or otherwise do not meet the eligibility requirements may be refused. We recommend using a trackable and appropriately insured shipping service for all customer-arranged returns.

For assistance, contact info@apollolighting.com or call +1 (954) 375-0100.

Learn more.

Many products sold by Apollo Lighting include a manufacturer's warranty covering defects in materials or workmanship. Warranty terms vary by brand, product category, and model, so eligibility, coverage duration, exclusions, and available remedies are determined by the applicable manufacturer. We recommend reviewing the warranty information provided with your product before installation or use, especially for marine electronics, navigation equipment, lighting, electrical systems, pumps, safety equipment, and other specialized marine products.

If you need warranty service, the claim must follow the process established by the manufacturer, authorized service center, or designated warranty provider. You may be asked for proof of purchase, a serial number, product registration, photos, maintenance or installation records, or other documentation. Apollo Lighting does not determine or modify a manufacturer's warranty coverage or final claim decision, but we are happy to help provide purchase information and direct you to the appropriate manufacturer or warranty resource.

Keep your receipt, product documentation, serial number information, and original packaging when practical. Damage caused by normal wear, misuse, improper installation, insufficient maintenance, corrosion, impact, unauthorized modifications, electrical issues, or operation outside the manufacturer's specifications may not be covered. Warranty claims are separate from standard returns, so a product that has been installed, used, or exposed to marine conditions may no longer qualify for return while still remaining eligible for evaluation under the manufacturer's applicable warranty.

Learn more.