Lopolight Tri-Color Navigation Light, Windex Mount with Light, Flat Base, 1NM, 10-32VDC, IP68

Overview

The Lopolight Tri-color nav light with Windex mount is a masthead tri-color navigation light with a flat base, rated for 1 NM visibility and built for 10-32 VDC systems.

It uses the standard sector layout for a sailboat tricolor (red 112.5 degrees, green 112.5 degrees, white 135 degrees) and is approved to COLREG72. The FB base keeps the installation low profile at about 92.5 mm diameter by 36 mm high, which helps when space is tight at the masthead.

The light is IP68 rated and draws 2.6 W (about 150 mA at 12 VDC or 81 mA at 24 VDC). A 0.75 m shielded marine-grade cable is factory attached.

Key features

• Tri-color sector output: red 112.5 degrees, green 112.5 degrees, white 135 degrees
• 1 NM visibility rating for leisure sailboats under 12 m
• 10-32 VDC input with low draw (2.6 W; 150 mA at 12 VDC, 81 mA at 24 VDC)
• IP68 sealing for rain, spray, and washdowns
• Flat base mounting supports fastening from the top or from underneath (three-hole pattern)
• Approved to COLREG72, EN14744, IEC 60945, and IACS E10

Variants

This product is offered in two housing finishes.

The finish is the only difference between variants; mounting and electrical ratings remain the same.

• 101-005W-FB - Finish Silver. A silver anodized look that blends with many aluminum spars and mast fittings.
• 101-005W-FB-B - Finish Black. A black anodized look that pairs well with darker spars, carbon rigs, and black deck hardware.

What's included

• Navigation light, pre-cabled with a 0.75 m shielded marine-grade cable
• Installation guide

Installation and wiring

Mount the light on a level, horizontal surface with a clear view around the horizon so sails, antennas, and wind gear do not block the sectors. This style of light is commonly installed at the masthead on sailboats under 12 m.

The FB base supports fastening from the top using three 4.4 mm clearance holes, or from underneath using three M4 x 0.7 threaded holes (6 mm deep). Route the cable through the center and seal any mast penetrations so water cannot track down the wiring.

Connect to a 10-32 VDC supply on a protected lighting circuit and use sealed splices if you extend the lead. Minimum feed wire gauge is 0.5 mm2 (AWG 22); go larger if the run is long to keep voltage drop under control.

Materials and environmental resistance

The housing is anodized aluminum with a PMMA (acrylic) lens and A4 stainless steel screws. IP68 sealing and the use of epoxy and polyurethane compounds in the build help it stay stable in vibration and wet conditions, with an operating temperature range of -25°C to 55°C.

On-board fit and use cases

This is a good match for sailors who want a single masthead tricolor when underway under sail and also want a tidy way to keep the Windex mount and navigation light together at the top of the spar.

It suits coastal cruisers and race boats running 12 V or 24 V power who want low electrical draw without giving up clear sector definition.

Maintenance and care

Rinse the lens and housing with fresh water after saltwater use and wipe away salt film that can dull the lens. Periodically check the mounting screws and inspect the cable where it enters the spar for chafe.

Orders are processed within 2 business days, which includes verification, packing, and dispatch. Orders of $100 or more qualify for free shipping when eligible. For orders under $100, shipping costs are calculated at checkout based on destination, package weight, and selected service. International shipping is available for eligible products, and certain items may require additional handling, warehouse transfers, or may ship directly from the manufacturer, which can affect processing time.

Deliveries are handled by preferred carriers such as USPS, UPS, FedEx, DHL, and others depending on your location and selected service. Estimated delivery times are displayed at checkout and may vary due to customs processing, carrier delays, weather, postal disruptions, or other circumstances beyond our control. Once your order ships, you'll receive a confirmation email with tracking information. Tracking may take up to 24 hours to update on the carrier's website and is also available through your account when applicable.

We ship throughout the United States and to most international destinations for products eligible for international shipping. International orders may be subject to customs duties, taxes, brokerage charges, or other import fees, which are the customer's responsibility and are not included in the product or shipping price. PO Boxes are accepted only when shipping through USPS, and not all packages qualify for this option. If your order does not arrive within the estimated delivery window, please contact us at info@apollolighting.com or +1 (954) 375-0100 so we can assist with locating your package.

Learn more.

Returns may be requested within 30 days of receiving your order. Items must be unused, uninstalled, unaltered, and returned in their original packaging with all tags, packing materials, blank warranty cards, manuals, instructions, accessories, and included items. Certain products, including installed or used electronics, electrical components, lighting, consumables, custom or special-order items, cut-to-length products, safety equipment, and merchandise exposed to water or marine conditions, may not be eligible for return.

To request a return, sign in to your account and select the applicable order and items, and submit your request for review. Eligible unfulfilled items may also be submitted for cancellation within 1 hour of placing the order. Returns or cancellations are not considered approved until you receive confirmation from Apollo Lighting. Please do not ship or drop off merchandise before receiving return approval and instructions.

Customers are responsible for arranging and paying for return shipping unless the return is due to an error by Apollo Lighting or the item is verified as defective, damaged, or incorrect. Missing, damaged, defective, or incorrect items must be reported within 2 business days of delivery, and photos or other documentation may be required for review. If the issue is verified, Apollo Lighting may provide or reimburse return shipping and issue a replacement or refund depending on the circumstances. International customers are responsible for return shipping, duties, taxes, customs charges, brokerage fees, and other costs associated with an international return.

After your return is received and inspected, approved refunds are issued to the original payment method and may take 5-7 business days to appear after processing. Original shipping and handling charges are nonrefundable, and the value of any included free items that are not returned may be deducted from the refund. Apollo Lighting does not charge a standard restocking fee on eligible returns. Returns that are incomplete, damaged, installed, used, altered, improperly packaged, or otherwise do not meet the eligibility requirements may be refused. We recommend using a trackable and appropriately insured shipping service for all customer-arranged returns.

For assistance, contact info@apollolighting.com or call +1 (954) 375-0100.

Learn more.

Many products sold by Apollo Lighting include a manufacturer's warranty covering defects in materials or workmanship. Warranty terms vary by brand, product category, and model, so eligibility, coverage duration, exclusions, and available remedies are determined by the applicable manufacturer. We recommend reviewing the warranty information provided with your product before installation or use, especially for marine electronics, navigation equipment, lighting, electrical systems, pumps, safety equipment, and other specialized marine products.

If you need warranty service, the claim must follow the process established by the manufacturer, authorized service center, or designated warranty provider. You may be asked for proof of purchase, a serial number, product registration, photos, maintenance or installation records, or other documentation. Apollo Lighting does not determine or modify a manufacturer's warranty coverage or final claim decision, but we are happy to help provide purchase information and direct you to the appropriate manufacturer or warranty resource.

Keep your receipt, product documentation, serial number information, and original packaging when practical. Damage caused by normal wear, misuse, improper installation, insufficient maintenance, corrosion, impact, unauthorized modifications, electrical issues, or operation outside the manufacturer's specifications may not be covered. Warranty claims are separate from standard returns, so a product that has been installed, used, or exposed to marine conditions may no longer qualify for return while still remaining eligible for evaluation under the manufacturer's applicable warranty.

Learn more.