Lumishore Eclipse SL100 LED Strip Light, Blue Light, 2.5m, 12V DC, IP68

Overview

The Lumishore 010-04478-00 is a blue ECLIPSE SL100 LED strip light in a 2.5 m (98 in) length for 12V DC systems (10 to 15V). It uses 60 blue LEDs per meter and carries an IP68 rating for wet installations where the strip may see spray or washdowns.

This strip is used for indirect accent lighting along gunwales, under seating, behind toe-kicks, inside lockers, or under cabinet edges. The strip is fully sealed and potted and is suited to outdoor, partially covered, and indoor mounting locations, but it is not intended to be permanently submerged.

For load planning, the maximum draw is 0.5A per meter (6W/m). At full 2.5 m length, plan for up to 1.25A on a 12V circuit.

Key features

• 2.5 m (98 in) blue strip in the ECLIPSE SL100 form factor
• 12V DC only (10 to 15V) with simple 2-wire connection
• 60 blue LEDs per meter; max draw 0.5A per meter (6W/m)
• IP68-rated, fully encapsulated and potted construction; UV resistant and salt spray tested
• Can be cut to length in 50 mm steps and sealed after trimming
• Adhesive backing for mounting; screw clips can be added in wet areas or outdoor runs
• Minimum 50 mm (1.97 in) vertical bend radius; do not twist or bend on the horizontal axis
• Supports on/off switching and can be used with an ECLIPSE Command Center for dimming and zone control

Installation and setup

Lay out the run before sticking anything down, especially around corners and transitions. The strip is meant to bend in the vertical axis with a minimum 50 mm (1.97 in) radius, so tight turns are typically handled by routing the mounting path rather than twisting the strip.

For adhesive mounting, clean the surface with IPA so it is free of dust and oils, press the strip firmly in place, and let the adhesive set for 24 hours before powering up. In outdoor locations, wet areas, or where the strip is under tension, add mechanical fasteners spaced about 250 to 300 mm (9.8 to 11.8 in) apart and on both sides of bends.

If you need to shorten the strip, cut only at the marked cut points (50 mm steps) and seal the cut end before installation so the assembly stays watertight.

Electrical and control

This strip is for 12V DC boats only and operates from 10 to 15V DC. Feed it from a fused supply sized for the total run length and keep splices and connections out of bilge water and splash paths whenever possible.

Basic control can be simple on/off switching. When tied into an ECLIPSE Command Center system, the strip can be dimmed and grouped into zones so you can manage lighting areas around the boat.

Compatibility and fit

The strip cross section is 10.8 mm x 4.0 mm (0.425 in x 0.157 in), which helps when planning channels, trim slots, or hidden mounting under overhangs. It is a good match for boats that want a low-profile blue accent line along steps, cockpit seating, toe-kicks, or under-cap rails on a 12V system.

Maintenance and care

Rinse with fresh water after heavy salt exposure and wipe with a soft cloth. Avoid chemical cleaners around the strip and end caps, and check that sealed ends and any added fasteners remain intact during routine service.

Orders are processed within 2 business days, which includes verification, packing, and dispatch. Orders of $100 or more qualify for free shipping when eligible. For orders under $100, shipping costs are calculated at checkout based on destination, package weight, and selected service. International shipping is available for eligible products, and certain items may require additional handling, warehouse transfers, or may ship directly from the manufacturer, which can affect processing time.

Deliveries are handled by preferred carriers such as USPS, UPS, FedEx, DHL, and others depending on your location and selected service. Estimated delivery times are displayed at checkout and may vary due to customs processing, carrier delays, weather, postal disruptions, or other circumstances beyond our control. Once your order ships, you'll receive a confirmation email with tracking information. Tracking may take up to 24 hours to update on the carrier's website and is also available through your account when applicable.

We ship throughout the United States and to most international destinations for products eligible for international shipping. International orders may be subject to customs duties, taxes, brokerage charges, or other import fees, which are the customer's responsibility and are not included in the product or shipping price. PO Boxes are accepted only when shipping through USPS, and not all packages qualify for this option. If your order does not arrive within the estimated delivery window, please contact us at info@apollolighting.com or +1 (954) 375-0100 so we can assist with locating your package.

Learn more.

Returns may be requested within 30 days of receiving your order. Items must be unused, uninstalled, unaltered, and returned in their original packaging with all tags, packing materials, blank warranty cards, manuals, instructions, accessories, and included items. Certain products, including installed or used electronics, electrical components, lighting, consumables, custom or special-order items, cut-to-length products, safety equipment, and merchandise exposed to water or marine conditions, may not be eligible for return.

To request a return, sign in to your account and select the applicable order and items, and submit your request for review. Eligible unfulfilled items may also be submitted for cancellation within 1 hour of placing the order. Returns or cancellations are not considered approved until you receive confirmation from Apollo Lighting. Please do not ship or drop off merchandise before receiving return approval and instructions.

Customers are responsible for arranging and paying for return shipping unless the return is due to an error by Apollo Lighting or the item is verified as defective, damaged, or incorrect. Missing, damaged, defective, or incorrect items must be reported within 2 business days of delivery, and photos or other documentation may be required for review. If the issue is verified, Apollo Lighting may provide or reimburse return shipping and issue a replacement or refund depending on the circumstances. International customers are responsible for return shipping, duties, taxes, customs charges, brokerage fees, and other costs associated with an international return.

After your return is received and inspected, approved refunds are issued to the original payment method and may take 5-7 business days to appear after processing. Original shipping and handling charges are nonrefundable, and the value of any included free items that are not returned may be deducted from the refund. Apollo Lighting does not charge a standard restocking fee on eligible returns. Returns that are incomplete, damaged, installed, used, altered, improperly packaged, or otherwise do not meet the eligibility requirements may be refused. We recommend using a trackable and appropriately insured shipping service for all customer-arranged returns.

For assistance, contact info@apollolighting.com or call +1 (954) 375-0100.

Learn more.

Many products sold by Apollo Lighting include a manufacturer's warranty covering defects in materials or workmanship. Warranty terms vary by brand, product category, and model, so eligibility, coverage duration, exclusions, and available remedies are determined by the applicable manufacturer. We recommend reviewing the warranty information provided with your product before installation or use, especially for marine electronics, navigation equipment, lighting, electrical systems, pumps, safety equipment, and other specialized marine products.

If you need warranty service, the claim must follow the process established by the manufacturer, authorized service center, or designated warranty provider. You may be asked for proof of purchase, a serial number, product registration, photos, maintenance or installation records, or other documentation. Apollo Lighting does not determine or modify a manufacturer's warranty coverage or final claim decision, but we are happy to help provide purchase information and direct you to the appropriate manufacturer or warranty resource.

Keep your receipt, product documentation, serial number information, and original packaging when practical. Damage caused by normal wear, misuse, improper installation, insufficient maintenance, corrosion, impact, unauthorized modifications, electrical issues, or operation outside the manufacturer's specifications may not be covered. Warranty claims are separate from standard returns, so a product that has been installed, used, or exposed to marine conditions may no longer qualify for return while still remaining eligible for evaluation under the manufacturer's applicable warranty.

Learn more.