Lumishore ECLIPSE SL100 Blue LED Strip Light, 5m, 12V DC, IP68

Overview

The Lumishore 010-04479-00 is a 5 m ECLIPSE SL100 blue LED strip light for 12V DC systems (10 to 15 V). The strip is fully encapsulated and potted with an IP68 rating, so it suits spots that see spray, washdowns, and damp air.

Output comes from 60 blue LEDs per meter, with power draw up to 0.5 A per meter (6 W/m). The strip measures 10.8 mm x 4.0 mm, which helps when you are hiding it in a shallow recess for indirect lighting.

It can be cut in 50 mm steps to match your layout. After trimming, the cut end needs to be sealed before installation so water cannot wick into the strip.

Key features

• 12V DC only operation (10 to 15 V range)
• 5 m strip length, with cut points every 50 mm for clean fit to your run
• 60 blue LEDs per meter for consistent line lighting
• Up to 0.5 A per meter draw (6 W/m) for straightforward circuit planning
• IP68-rated strip with fully encapsulated, potted construction
• UV resistant and salt spray tested for exposed routing on deck boats and in open cockpits
• Low-profile strip cross section: 10.8 mm x 4.0 mm
• Simple 2-wire power hookup; control can be basic on and off, or expanded with an ECLIPSE Command Center for dimming and zone control

Installation and setup

Plan the mounting path first, then dry-fit the strip so you know where any cuts will land. When the length is right, make cuts only at the marked 50 mm intervals and seal the cut end before the strip goes on the boat.

For adhesive-backed installs, surface prep matters. Clean and dry the mounting area, then press the strip firmly along the full length. In areas that warm up, stay damp, or see vibration, adding mechanical retention such as screw-in stainless clips helps keep the strip from creeping over time.

Electrical and control notes

Power is a simple two-wire connection to a 12V DC supply. A full 5 m run can draw up to about 2.5 A at maximum output, and shorter runs scale down proportionally, so fuse and wire size can be planned around the length you actually install.

For basic accent lighting, an on and off switch works. When paired with an ECLIPSE Command Center, the same strip can add dimming and zone control, and it can also be operated through a compatible smart device or multifunction display.

Use cases on board

This strip works well as hidden blue accent lighting under gunwales, along toe-kicks, behind cabin valances, inside lockers, and under hardtops where you want a soft glow without a visible fixture. It is a solid fit for boats running a 12V house system that need a strip light that tolerates sun, salt air, and wet use areas.

Maintenance and care

Rinse off salt residue during routine washdowns and wipe with mild soap and water when needed. Avoid harsh solvents on the encapsulated surface and check that sealed ends stay intact after any refit work or re-routing.

Orders are processed within 2 business days, which includes verification, packing, and dispatch. Orders of $100 or more qualify for free shipping when eligible. For orders under $100, shipping costs are calculated at checkout based on destination, package weight, and selected service. International shipping is available for eligible products, and certain items may require additional handling, warehouse transfers, or may ship directly from the manufacturer, which can affect processing time.

Deliveries are handled by preferred carriers such as USPS, UPS, FedEx, DHL, and others depending on your location and selected service. Estimated delivery times are displayed at checkout and may vary due to customs processing, carrier delays, weather, postal disruptions, or other circumstances beyond our control. Once your order ships, you'll receive a confirmation email with tracking information. Tracking may take up to 24 hours to update on the carrier's website and is also available through your account when applicable.

We ship throughout the United States and to most international destinations for products eligible for international shipping. International orders may be subject to customs duties, taxes, brokerage charges, or other import fees, which are the customer's responsibility and are not included in the product or shipping price. PO Boxes are accepted only when shipping through USPS, and not all packages qualify for this option. If your order does not arrive within the estimated delivery window, please contact us at info@apollolighting.com or +1 (954) 375-0100 so we can assist with locating your package.

Learn more.

Returns may be requested within 30 days of receiving your order. Items must be unused, uninstalled, unaltered, and returned in their original packaging with all tags, packing materials, blank warranty cards, manuals, instructions, accessories, and included items. Certain products, including installed or used electronics, electrical components, lighting, consumables, custom or special-order items, cut-to-length products, safety equipment, and merchandise exposed to water or marine conditions, may not be eligible for return.

To request a return, sign in to your account and select the applicable order and items, and submit your request for review. Eligible unfulfilled items may also be submitted for cancellation within 1 hour of placing the order. Returns or cancellations are not considered approved until you receive confirmation from Apollo Lighting. Please do not ship or drop off merchandise before receiving return approval and instructions.

Customers are responsible for arranging and paying for return shipping unless the return is due to an error by Apollo Lighting or the item is verified as defective, damaged, or incorrect. Missing, damaged, defective, or incorrect items must be reported within 2 business days of delivery, and photos or other documentation may be required for review. If the issue is verified, Apollo Lighting may provide or reimburse return shipping and issue a replacement or refund depending on the circumstances. International customers are responsible for return shipping, duties, taxes, customs charges, brokerage fees, and other costs associated with an international return.

After your return is received and inspected, approved refunds are issued to the original payment method and may take 5-7 business days to appear after processing. Original shipping and handling charges are nonrefundable, and the value of any included free items that are not returned may be deducted from the refund. Apollo Lighting does not charge a standard restocking fee on eligible returns. Returns that are incomplete, damaged, installed, used, altered, improperly packaged, or otherwise do not meet the eligibility requirements may be refused. We recommend using a trackable and appropriately insured shipping service for all customer-arranged returns.

For assistance, contact info@apollolighting.com or call +1 (954) 375-0100.

Learn more.

Many products sold by Apollo Lighting include a manufacturer's warranty covering defects in materials or workmanship. Warranty terms vary by brand, product category, and model, so eligibility, coverage duration, exclusions, and available remedies are determined by the applicable manufacturer. We recommend reviewing the warranty information provided with your product before installation or use, especially for marine electronics, navigation equipment, lighting, electrical systems, pumps, safety equipment, and other specialized marine products.

If you need warranty service, the claim must follow the process established by the manufacturer, authorized service center, or designated warranty provider. You may be asked for proof of purchase, a serial number, product registration, photos, maintenance or installation records, or other documentation. Apollo Lighting does not determine or modify a manufacturer's warranty coverage or final claim decision, but we are happy to help provide purchase information and direct you to the appropriate manufacturer or warranty resource.

Keep your receipt, product documentation, serial number information, and original packaging when practical. Damage caused by normal wear, misuse, improper installation, insufficient maintenance, corrosion, impact, unauthorized modifications, electrical issues, or operation outside the manufacturer's specifications may not be covered. Warranty claims are separate from standard returns, so a product that has been installed, used, or exposed to marine conditions may no longer qualify for return while still remaining eligible for evaluation under the manufacturer's applicable warranty.

Learn more.