Lumishore ECLIPSE SL100 LED Strip Light, 1m, White Light 5000K, 12V DC (10-15V), IP68, Fully Encapsulated and Potted

Overview

The Lumishore 010-04480-00 is a 1 m white LED strip light for 12V DC systems (10 to 15 V DC) that adds clean accent lighting in tight spaces on board. It outputs white light at 5000 K with 60 LEDs per meter, draws up to 0.5 A (6 W) per meter, and uses an IP68-rated, fully encapsulated construction for wet locations.

This style of strip is commonly tucked under gunwales, under steps, behind valances, inside lockers, or along toe-kicks where you want light without seeing the fixture. It can be installed indoors or outdoors in exposed marine environments, but it is not meant to be permanently submerged.

The strip can be cut to length in 50 mm steps and the cut end should be sealed before it goes on the boat. Plan your run so the strip follows gentle curves only, with a minimum 50 mm bend radius, and avoid twisting or bending it sideways.

Key features

• 1 m strip length with white output at 5000 K
• Runs on 12V DC only (10 to 15 V DC operating range)
• 60 LEDs per meter for an even line of light
• Up to 0.5 A (6 W) per meter power draw for circuit planning
• IP68-rated, fully encapsulated and potted construction for wet locations and washdowns
• Simple 2-wire hookup for basic on and off control
• Cut-to-length in 50 mm increments when a custom fit is needed (seal the cut end)
• Low-profile strip section (10.8 mm wide by 4.0 mm thick) with end cap dimensions of 12.0 mm by 5.2 mm

Installation and setup

Dry-fit the strip first so you can confirm the routing, the bends, and where the light line will fall once it is hidden behind trim. Keep bends smooth, maintain at least a 50 mm radius, and do not twist the strip or bend it in the sideways direction. If you need a shorter run, cut only at the marked cut points and seal the cut end before mounting so water cannot migrate into the strip.

For mounting, the strip is intended to sit flat against a clean surface. Take the time to degrease and dry the mounting area so the adhesive backing can hold properly, especially in high-humidity compartments.

Electrical and system integration

Power is a straightforward 2-wire connection on a 12V DC boat. Use an appropriately sized fuse for the complete circuit and make splices in a protected location with marine-grade connectors and heat-shrink. For basic use, the strip can be switched on and off; for installations that need dimming and zone-style control, it supports use with an external lighting controller that provides those functions.

Compatibility and fit

This is the 1 m length in the SL100 strip format, which helps when you want a short run without coiling extra material. Confirm you have enough clearance for the strip section along the full path, plus a little room at the end cap area where the strip terminates. If the mounting location is exposed on deck or near a cockpit coaming, route wiring so it is supported and protected from chafe and vibration.

Use on board

This is a good match for boaters who want a crisp white line of light for step lighting, under-gunwale glow, or locker illumination while keeping the fixture itself out of sight. It also works well in cabins and saloons where you want nighttime lighting that is easy on the eyes without turning on overhead fixtures.

Orders are processed within 2 business days, which includes verification, packing, and dispatch. Orders of $100 or more qualify for free shipping when eligible. For orders under $100, shipping costs are calculated at checkout based on destination, package weight, and selected service. International shipping is available for eligible products, and certain items may require additional handling, warehouse transfers, or may ship directly from the manufacturer, which can affect processing time.

Deliveries are handled by preferred carriers such as USPS, UPS, FedEx, DHL, and others depending on your location and selected service. Estimated delivery times are displayed at checkout and may vary due to customs processing, carrier delays, weather, postal disruptions, or other circumstances beyond our control. Once your order ships, you'll receive a confirmation email with tracking information. Tracking may take up to 24 hours to update on the carrier's website and is also available through your account when applicable.

We ship throughout the United States and to most international destinations for products eligible for international shipping. International orders may be subject to customs duties, taxes, brokerage charges, or other import fees, which are the customer's responsibility and are not included in the product or shipping price. PO Boxes are accepted only when shipping through USPS, and not all packages qualify for this option. If your order does not arrive within the estimated delivery window, please contact us at info@apollolighting.com or +1 (954) 375-0100 so we can assist with locating your package.

Learn more.

Returns may be requested within 30 days of receiving your order. Items must be unused, uninstalled, unaltered, and returned in their original packaging with all tags, packing materials, blank warranty cards, manuals, instructions, accessories, and included items. Certain products, including installed or used electronics, electrical components, lighting, consumables, custom or special-order items, cut-to-length products, safety equipment, and merchandise exposed to water or marine conditions, may not be eligible for return.

To request a return, sign in to your account and select the applicable order and items, and submit your request for review. Eligible unfulfilled items may also be submitted for cancellation within 1 hour of placing the order. Returns or cancellations are not considered approved until you receive confirmation from Apollo Lighting. Please do not ship or drop off merchandise before receiving return approval and instructions.

Customers are responsible for arranging and paying for return shipping unless the return is due to an error by Apollo Lighting or the item is verified as defective, damaged, or incorrect. Missing, damaged, defective, or incorrect items must be reported within 2 business days of delivery, and photos or other documentation may be required for review. If the issue is verified, Apollo Lighting may provide or reimburse return shipping and issue a replacement or refund depending on the circumstances. International customers are responsible for return shipping, duties, taxes, customs charges, brokerage fees, and other costs associated with an international return.

After your return is received and inspected, approved refunds are issued to the original payment method and may take 5-7 business days to appear after processing. Original shipping and handling charges are nonrefundable, and the value of any included free items that are not returned may be deducted from the refund. Apollo Lighting does not charge a standard restocking fee on eligible returns. Returns that are incomplete, damaged, installed, used, altered, improperly packaged, or otherwise do not meet the eligibility requirements may be refused. We recommend using a trackable and appropriately insured shipping service for all customer-arranged returns.

For assistance, contact info@apollolighting.com or call +1 (954) 375-0100.

Learn more.

Many products sold by Apollo Lighting include a manufacturer's warranty covering defects in materials or workmanship. Warranty terms vary by brand, product category, and model, so eligibility, coverage duration, exclusions, and available remedies are determined by the applicable manufacturer. We recommend reviewing the warranty information provided with your product before installation or use, especially for marine electronics, navigation equipment, lighting, electrical systems, pumps, safety equipment, and other specialized marine products.

If you need warranty service, the claim must follow the process established by the manufacturer, authorized service center, or designated warranty provider. You may be asked for proof of purchase, a serial number, product registration, photos, maintenance or installation records, or other documentation. Apollo Lighting does not determine or modify a manufacturer's warranty coverage or final claim decision, but we are happy to help provide purchase information and direct you to the appropriate manufacturer or warranty resource.

Keep your receipt, product documentation, serial number information, and original packaging when practical. Damage caused by normal wear, misuse, improper installation, insufficient maintenance, corrosion, impact, unauthorized modifications, electrical issues, or operation outside the manufacturer's specifications may not be covered. Warranty claims are separate from standard returns, so a product that has been installed, used, or exposed to marine conditions may no longer qualify for return while still remaining eligible for evaluation under the manufacturer's applicable warranty.

Learn more.