Lumishore ECLIPSE SL100 LED Strip Light, 2.5m, White Light, 12V

Overview

The Lumishore 010-04481-00 is a 2.5 m white LED strip light for indirect onboard lighting where you want an even line of light without a bulky fixture.

It runs on 12V DC systems (10 to 15V) and outputs white light at 5000 K with 60 LEDs per meter. The strip is fully encapsulated, carries an IP68 rating, and is suited for indoor spaces and exposed areas that see spray and washdowns, while it is not intended for permanent submersion.

For planning fit, the strip body is 10.8 mm wide by 4.0 mm thick, and the end cap is 12.0 mm by 5.2 mm.

Key features

• 2.5 m length, cut in 50 mm steps; seal the cut end after trimming to keep the assembly watertight.
• 12V DC only (10 to 15V) with a simple 2-wire installation.
• Power draw rated at 0.5 A per meter (6 W/m) for straightforward circuit sizing.
• IP68-rated, fully encapsulated and potted construction with UV resistance and salt spray testing.
• 5000 K white output with 60 LEDs per meter for a clean line of light in channels and coves.
• Adhesive backing for fast mounting; screw clips can be added where vibration, wet areas, or tighter bends need extra hold.
• Supports basic on/off switching; can be dimmed and grouped into zones when used with an ECLIPSE Command Center.

Installation and setup

Lay the strip out straight before you start and avoid kinks or tight coils. For the adhesive to hold, the mounting surface needs to be clean and free of dust and oils. Press along the edges of the strip during installation and avoid pushing directly on the LEDs.

After placing it, give the adhesive time to set before powering the light on. In outdoor runs, wet areas, or places with tighter bend radii, use mechanical fasteners in addition to the adhesive backing, and place fasteners at regular intervals so the strip stays put over time.

If you cut the strip to length, only cut at the marked cut points, then seal the cut end with the end cap so water cannot track into the strip.

Electrical and system integration

This strip is intended for 12V DC circuits. Plan a fused feed sized for the total installed length using the rated 0.5 A per meter draw. At the full 2.5 m length, that is 1.25 A total (about 15 W at 12V).

Keep connections secure and protected in the same way you would any other low-voltage marine circuit, especially in lockers, under gunwales, and other spaces that see moisture and vibration.

Compatibility and fit

The low profile cross section helps it tuck into trim channels, under steps, behind coamings, and beneath cabinetry. Confirm you have enough depth for the end cap where the lead exits, and plan bends so the strip is not forced into a radius that fights the adhesive.

Use cases on board

This is a good match for boats with a 12V house system that want white light in places where a rigid fixture is awkward, such as under toe-kicks, along cockpit seating bases, inside cabin coves, or behind valances. It works well for walking-light levels and general accent lighting where you want the source hidden and the glow even.

Maintenance and care

Periodically check that the strip is still fully supported, especially in high-heat or high-spray areas, and re-secure any spots that have lifted before they collect dirt or moisture. Clean with mild soap and water and avoid harsh chemical cleaners on the strip and end caps.

Orders are processed within 2 business days, which includes verification, packing, and dispatch. Orders of $100 or more qualify for free shipping when eligible. For orders under $100, shipping costs are calculated at checkout based on destination, package weight, and selected service. International shipping is available for eligible products, and certain items may require additional handling, warehouse transfers, or may ship directly from the manufacturer, which can affect processing time.

Deliveries are handled by preferred carriers such as USPS, UPS, FedEx, DHL, and others depending on your location and selected service. Estimated delivery times are displayed at checkout and may vary due to customs processing, carrier delays, weather, postal disruptions, or other circumstances beyond our control. Once your order ships, you'll receive a confirmation email with tracking information. Tracking may take up to 24 hours to update on the carrier's website and is also available through your account when applicable.

We ship throughout the United States and to most international destinations for products eligible for international shipping. International orders may be subject to customs duties, taxes, brokerage charges, or other import fees, which are the customer's responsibility and are not included in the product or shipping price. PO Boxes are accepted only when shipping through USPS, and not all packages qualify for this option. If your order does not arrive within the estimated delivery window, please contact us at info@apollolighting.com or +1 (954) 375-0100 so we can assist with locating your package.

Learn more.

Returns may be requested within 30 days of receiving your order. Items must be unused, uninstalled, unaltered, and returned in their original packaging with all tags, packing materials, blank warranty cards, manuals, instructions, accessories, and included items. Certain products, including installed or used electronics, electrical components, lighting, consumables, custom or special-order items, cut-to-length products, safety equipment, and merchandise exposed to water or marine conditions, may not be eligible for return.

To request a return, sign in to your account and select the applicable order and items, and submit your request for review. Eligible unfulfilled items may also be submitted for cancellation within 1 hour of placing the order. Returns or cancellations are not considered approved until you receive confirmation from Apollo Lighting. Please do not ship or drop off merchandise before receiving return approval and instructions.

Customers are responsible for arranging and paying for return shipping unless the return is due to an error by Apollo Lighting or the item is verified as defective, damaged, or incorrect. Missing, damaged, defective, or incorrect items must be reported within 2 business days of delivery, and photos or other documentation may be required for review. If the issue is verified, Apollo Lighting may provide or reimburse return shipping and issue a replacement or refund depending on the circumstances. International customers are responsible for return shipping, duties, taxes, customs charges, brokerage fees, and other costs associated with an international return.

After your return is received and inspected, approved refunds are issued to the original payment method and may take 5-7 business days to appear after processing. Original shipping and handling charges are nonrefundable, and the value of any included free items that are not returned may be deducted from the refund. Apollo Lighting does not charge a standard restocking fee on eligible returns. Returns that are incomplete, damaged, installed, used, altered, improperly packaged, or otherwise do not meet the eligibility requirements may be refused. We recommend using a trackable and appropriately insured shipping service for all customer-arranged returns.

For assistance, contact info@apollolighting.com or call +1 (954) 375-0100.

Learn more.

Many products sold by Apollo Lighting include a manufacturer's warranty covering defects in materials or workmanship. Warranty terms vary by brand, product category, and model, so eligibility, coverage duration, exclusions, and available remedies are determined by the applicable manufacturer. We recommend reviewing the warranty information provided with your product before installation or use, especially for marine electronics, navigation equipment, lighting, electrical systems, pumps, safety equipment, and other specialized marine products.

If you need warranty service, the claim must follow the process established by the manufacturer, authorized service center, or designated warranty provider. You may be asked for proof of purchase, a serial number, product registration, photos, maintenance or installation records, or other documentation. Apollo Lighting does not determine or modify a manufacturer's warranty coverage or final claim decision, but we are happy to help provide purchase information and direct you to the appropriate manufacturer or warranty resource.

Keep your receipt, product documentation, serial number information, and original packaging when practical. Damage caused by normal wear, misuse, improper installation, insufficient maintenance, corrosion, impact, unauthorized modifications, electrical issues, or operation outside the manufacturer's specifications may not be covered. Warranty claims are separate from standard returns, so a product that has been installed, used, or exposed to marine conditions may no longer qualify for return while still remaining eligible for evaluation under the manufacturer's applicable warranty.

Learn more.