Lumishore Eclipse SL100 LED Strip Light, White Light, 2.5m, 12V, IP68

Overview

The Lumishore 010-04481-00 is a 2.5 m white LED strip light for adding indirect lighting on board. It runs on 12 V DC systems (10 to 15 V DC) and uses a simple 2-wire connection, which keeps wiring straightforward for refits and new builds.

The strip is fully encapsulated and potted with an IP68 rating, making it a solid choice for damp lockers, under-gunwale runs, steps, and other spots that see spray and washdowns once terminations are sealed properly. Power draw is up to 0.5 A per meter (6 W/m), so a full 2.5 m length plans at up to about 1.25 A on a 12 V circuit.

With a slim cross section of about 10.8 mm x 5.2 mm, it tucks into channels and behind trim where you want the light to be seen but not the fixture.

Key features

• 2.5 m white LED strip for indirect lighting in cabins, cockpits, hardtops, lockers, and under-gunwale accents
• 12 V DC operation (10 to 15 V DC) with a straightforward 2-wire hookup
• IP68-rated, fully encapsulated and potted construction for wet marine environments when installed with sealed ends and connections
• Up to 0.5 A per meter (6 W/m) for practical load planning on existing lighting circuits
• Low-profile size around 10.8 mm x 5.2 mm for clean, hidden installs
• Cut-and-seal format for trimming the length to suit the run and finishing the end neatly

Installation and setup

Lay out the run first and confirm you have a clean path for both the strip and the supply wiring. Keep bends gentle, avoid hard corners, and protect the strip anywhere it could be pinched by panels or hardware.

If you cut the strip to length, finish the end with the correct sealing method so water cannot wick into the strip over time. Take a moment to plan where any splices or transitions will live so they stay accessible but out of direct spray.

Electrical and system integration

This is a 12 V DC light strip with a 2-wire connection, so it can be tied into a dedicated lighting switch or an existing lighting circuit as long as the circuit capacity is appropriate. Use the per-meter current draw to size wiring and fuse protection for the total installed length, including any additional strips on the same circuit.

Use cases on board

This strip works well for owners who want white accent light that stays out of sight, such as along toe-kicks, behind valances, under coamings, or inside storage compartments. It is also a practical option when you need an IP68-rated strip for areas that get damp during normal boating and washdowns.

Maintenance and care

Rinse salt residue from exposed areas during routine washdowns and check any sealed ends and connections periodically. If the strip is installed in high-traffic spots, inspect for chafe and re-secure or protect the run anywhere vibration or movement could work it loose over time.

Orders are processed within 2 business days, which includes verification, packing, and dispatch. Orders of $100 or more qualify for free shipping when eligible. For orders under $100, shipping costs are calculated at checkout based on destination, package weight, and selected service. International shipping is available for eligible products, and certain items may require additional handling, warehouse transfers, or may ship directly from the manufacturer, which can affect processing time.

Deliveries are handled by preferred carriers such as USPS, UPS, FedEx, DHL, and others depending on your location and selected service. Estimated delivery times are displayed at checkout and may vary due to customs processing, carrier delays, weather, postal disruptions, or other circumstances beyond our control. Once your order ships, you'll receive a confirmation email with tracking information. Tracking may take up to 24 hours to update on the carrier's website and is also available through your account when applicable.

We ship throughout the United States and to most international destinations for products eligible for international shipping. International orders may be subject to customs duties, taxes, brokerage charges, or other import fees, which are the customer's responsibility and are not included in the product or shipping price. PO Boxes are accepted only when shipping through USPS, and not all packages qualify for this option. If your order does not arrive within the estimated delivery window, please contact us at info@apollolighting.com or +1 (954) 375-0100 so we can assist with locating your package.

Learn more.

Returns may be requested within 30 days of receiving your order. Items must be unused, uninstalled, unaltered, and returned in their original packaging with all tags, packing materials, blank warranty cards, manuals, instructions, accessories, and included items. Certain products, including installed or used electronics, electrical components, lighting, consumables, custom or special-order items, cut-to-length products, safety equipment, and merchandise exposed to water or marine conditions, may not be eligible for return.

To request a return, sign in to your account and select the applicable order and items, and submit your request for review. Eligible unfulfilled items may also be submitted for cancellation within 1 hour of placing the order. Returns or cancellations are not considered approved until you receive confirmation from Apollo Lighting. Please do not ship or drop off merchandise before receiving return approval and instructions.

Customers are responsible for arranging and paying for return shipping unless the return is due to an error by Apollo Lighting or the item is verified as defective, damaged, or incorrect. Missing, damaged, defective, or incorrect items must be reported within 2 business days of delivery, and photos or other documentation may be required for review. If the issue is verified, Apollo Lighting may provide or reimburse return shipping and issue a replacement or refund depending on the circumstances. International customers are responsible for return shipping, duties, taxes, customs charges, brokerage fees, and other costs associated with an international return.

After your return is received and inspected, approved refunds are issued to the original payment method and may take 5-7 business days to appear after processing. Original shipping and handling charges are nonrefundable, and the value of any included free items that are not returned may be deducted from the refund. Apollo Lighting does not charge a standard restocking fee on eligible returns. Returns that are incomplete, damaged, installed, used, altered, improperly packaged, or otherwise do not meet the eligibility requirements may be refused. We recommend using a trackable and appropriately insured shipping service for all customer-arranged returns.

For assistance, contact info@apollolighting.com or call +1 (954) 375-0100.

Learn more.

Many products sold by Apollo Lighting include a manufacturer's warranty covering defects in materials or workmanship. Warranty terms vary by brand, product category, and model, so eligibility, coverage duration, exclusions, and available remedies are determined by the applicable manufacturer. We recommend reviewing the warranty information provided with your product before installation or use, especially for marine electronics, navigation equipment, lighting, electrical systems, pumps, safety equipment, and other specialized marine products.

If you need warranty service, the claim must follow the process established by the manufacturer, authorized service center, or designated warranty provider. You may be asked for proof of purchase, a serial number, product registration, photos, maintenance or installation records, or other documentation. Apollo Lighting does not determine or modify a manufacturer's warranty coverage or final claim decision, but we are happy to help provide purchase information and direct you to the appropriate manufacturer or warranty resource.

Keep your receipt, product documentation, serial number information, and original packaging when practical. Damage caused by normal wear, misuse, improper installation, insufficient maintenance, corrosion, impact, unauthorized modifications, electrical issues, or operation outside the manufacturer's specifications may not be covered. Warranty claims are separate from standard returns, so a product that has been installed, used, or exposed to marine conditions may no longer qualify for return while still remaining eligible for evaluation under the manufacturer's applicable warranty.

Learn more.