Lumishore ECLIPSE SL100 LED Strip Light, 12V DC (10-15V), IP68, Blue/White (5000K), 1m

Overview

The Lumishore 010-04483-00 is a 1 m dual-color LED strip light that switches between blue and white light for on-board accent and courtesy lighting. It runs on 12 V DC systems only (10-15 V), draws up to 0.5 A per meter (6 W/m), and the strip is sealed to IP68 for wet locations.

The strip sits low and fits where rigid fixtures do not, with a 10.8 mm x 4.0 mm cross section. It is UV resistant and salt spray tested, which matters on open decks and in cockpits where sun and salt live. The strip can be cut to length in 50 mm steps, but the cut end needs to be sealed before installation so the water seal stays intact.

Wired as a simple 2-wire light, it can be controlled with an on/off switch for power and color selection. With an ECLIPSE Command Center controller, the same strip supports dimming, zone control, and additional lighting effects, including strobe, from a compatible MFD or smart device.

Key features

• 1 m dual-color strip that switches between blue and white light (white channel is 5000 K)
• 12 V DC only input range 10-15 V
• Power draw up to 0.5 A per meter (6 W/m)
• IP68 sealing with fully encapsulated and potted construction
• UV resistant and salt spray tested for typical topside installs
• Low-profile strip size 10.8 mm x 4.0 mm with 12.0 mm x 5.2 mm end cap clearance
• Cuttable in 50 mm steps; cut end must be sealed after trimming
• Simple 2-wire hookup; on/off switch control supports on/off and blue-white switching
• Supports ECLIPSE Command Center control for dimming, zone control, and strobe when used with that controller

Installation and setup

Plan the run first and leave a little slack at each end for service access. Clean the mounting surface well so the adhesive backing bonds properly, then add mechanical fastening where you expect heat, vibration, or frequent washdowns.

When trimming the strip, cut only at the marked 50 mm cut points, seal the cut end, and keep connectors and splices out of areas that stay submerged. Protect the feed with an appropriately sized fuse at the power source and use tinned marine wire with heat-shrink terminations.

Compatibility and control

This is a 12 V DC only light strip. If your boat is 24 V, a proper 24-to-12 V converter is required and should be sized for the total strip load.

Basic switching gives on/off control and lets you toggle between blue and white. Adding an ECLIPSE Command Center opens up dimming and multi-zone control, which is useful when you want separate circuits for cockpit, cabin, and toe-kick lighting.

Where it fits on board

Common installs include under gunwales, along cockpit coamings, behind valances, under steps, inside lockers, and under cabinetry as a night light run that stays out of sight. Blue light is often used to preserve night vision, while the white channel gives a neutral task light for rigging, tackle, and quick cleanups.

This strip is a good match when you want a low-profile courtesy light run and need an IP68 strip that can handle spray, sun exposure, and typical vibration underway.

Maintenance and care

Rinse salt residue when you can and avoid aiming a pressure washer directly at the ends and connectors. If you cut the strip, recheck the sealed end periodically and reseal if it shows any lifting or cracking.

Orders are processed within 2 business days, which includes verification, packing, and dispatch. Orders of $100 or more qualify for free shipping when eligible. For orders under $100, shipping costs are calculated at checkout based on destination, package weight, and selected service. International shipping is available for eligible products, and certain items may require additional handling, warehouse transfers, or may ship directly from the manufacturer, which can affect processing time.

Deliveries are handled by preferred carriers such as USPS, UPS, FedEx, DHL, and others depending on your location and selected service. Estimated delivery times are displayed at checkout and may vary due to customs processing, carrier delays, weather, postal disruptions, or other circumstances beyond our control. Once your order ships, you'll receive a confirmation email with tracking information. Tracking may take up to 24 hours to update on the carrier's website and is also available through your account when applicable.

We ship throughout the United States and to most international destinations for products eligible for international shipping. International orders may be subject to customs duties, taxes, brokerage charges, or other import fees, which are the customer's responsibility and are not included in the product or shipping price. PO Boxes are accepted only when shipping through USPS, and not all packages qualify for this option. If your order does not arrive within the estimated delivery window, please contact us at info@apollolighting.com or +1 (954) 375-0100 so we can assist with locating your package.

Learn more.

Returns may be requested within 30 days of receiving your order. Items must be unused, uninstalled, unaltered, and returned in their original packaging with all tags, packing materials, blank warranty cards, manuals, instructions, accessories, and included items. Certain products, including installed or used electronics, electrical components, lighting, consumables, custom or special-order items, cut-to-length products, safety equipment, and merchandise exposed to water or marine conditions, may not be eligible for return.

To request a return, sign in to your account and select the applicable order and items, and submit your request for review. Eligible unfulfilled items may also be submitted for cancellation within 1 hour of placing the order. Returns or cancellations are not considered approved until you receive confirmation from Apollo Lighting. Please do not ship or drop off merchandise before receiving return approval and instructions.

Customers are responsible for arranging and paying for return shipping unless the return is due to an error by Apollo Lighting or the item is verified as defective, damaged, or incorrect. Missing, damaged, defective, or incorrect items must be reported within 2 business days of delivery, and photos or other documentation may be required for review. If the issue is verified, Apollo Lighting may provide or reimburse return shipping and issue a replacement or refund depending on the circumstances. International customers are responsible for return shipping, duties, taxes, customs charges, brokerage fees, and other costs associated with an international return.

After your return is received and inspected, approved refunds are issued to the original payment method and may take 5-7 business days to appear after processing. Original shipping and handling charges are nonrefundable, and the value of any included free items that are not returned may be deducted from the refund. Apollo Lighting does not charge a standard restocking fee on eligible returns. Returns that are incomplete, damaged, installed, used, altered, improperly packaged, or otherwise do not meet the eligibility requirements may be refused. We recommend using a trackable and appropriately insured shipping service for all customer-arranged returns.

For assistance, contact info@apollolighting.com or call +1 (954) 375-0100.

Learn more.

Many products sold by Apollo Lighting include a manufacturer's warranty covering defects in materials or workmanship. Warranty terms vary by brand, product category, and model, so eligibility, coverage duration, exclusions, and available remedies are determined by the applicable manufacturer. We recommend reviewing the warranty information provided with your product before installation or use, especially for marine electronics, navigation equipment, lighting, electrical systems, pumps, safety equipment, and other specialized marine products.

If you need warranty service, the claim must follow the process established by the manufacturer, authorized service center, or designated warranty provider. You may be asked for proof of purchase, a serial number, product registration, photos, maintenance or installation records, or other documentation. Apollo Lighting does not determine or modify a manufacturer's warranty coverage or final claim decision, but we are happy to help provide purchase information and direct you to the appropriate manufacturer or warranty resource.

Keep your receipt, product documentation, serial number information, and original packaging when practical. Damage caused by normal wear, misuse, improper installation, insufficient maintenance, corrosion, impact, unauthorized modifications, electrical issues, or operation outside the manufacturer's specifications may not be covered. Warranty claims are separate from standard returns, so a product that has been installed, used, or exposed to marine conditions may no longer qualify for return while still remaining eligible for evaluation under the manufacturer's applicable warranty.

Learn more.