Lumishore ECLIPSE SL100 LED Strip Light, Blue/White, 2.5m, 12V, IP68

Overview

The Lumishore 010-04484-00 is a 2.5 m ECLIPSE SL100 LED strip light that switches between blue and white light for indirect and accent lighting on board. It runs on 12 V DC systems (10 to 15 V input range) and draws up to 0.5 A (6 W) per meter.

The strip is fully encapsulated and potted with an IP68 rating, so it holds up in wet areas and during routine washdowns, while keeping a low profile at 10.8 mm x 4.0 mm. It is UV resistant and salt spray tested for typical coastal and offshore exposure.

You can cut it to length in 50 mm steps and seal the cut end before mounting. It can be installed inside or outside, but it is not intended to be permanently submerged.

Key features

• 2.5 m dual-color strip with blue and white output (white is 5000 K)
• 12 V DC only, operating range 10 to 15 V
• Maximum draw of 0.5 A (6 W) per meter
• IP68-rated, fully encapsulated and potted construction
• LED density: 60 blue LEDs per meter and 60 white LEDs per meter
• Cut-to-length installation in 50 mm increments with a sealed cut end
• Adhesive backing, with support for screw-clip retention where extra hold is needed
• Control options include on/off switching or use with an ECLIPSE Command Center for dimming, zone control, and strobe functions

Compatibility and fit

This strip light is for 12 V DC boats only, so it is a match for typical 12 V house systems and DC distribution panels. The low-profile strip (10.8 mm x 4.0 mm) fits neatly in tight channels, behind trim, under gunwales, and along toe-kicks where you want light without seeing the fixture.

Plan for the strip’s handling limits during routing: it has a 50 mm bend radius in the vertical axis, and it should not be twisted or bent in the horizontal axis.

Installation and setup

For clean results, dry-fit the run first and keep the strip laid out flat and straight as you work. Longer runs are easier with two people so the strip stays supported and does not kink while uncoiling.

Mount to a clean, dry surface so the adhesive can bond well, and avoid pressing directly over the LED area during installation. In areas that see vibration, heat, or frequent washdowns, mechanical retention with screw clips helps keep the run in place over time.

If you need to shorten the length, cut only at the marked cut points (50 mm steps) and seal the cut end before installing in service areas exposed to moisture.

Electrical and control

Wiring is a simple two-wire DC hookup with an appropriately sized fuse in the supply line. The dual-color version uses separate channels for blue and white, and both channels should not be powered at the same time.

When wired to a switch, a three-position on/off/on style setup is used to select between colors. When used with an ECLIPSE Command Center, control can be handled from a smart device or multifunction display, and features can include dimming, zone control, and strobe. For Command Center installations, strip lights can be run up to 20 m per zone.

Use on board

This strip is a good fit for boaters who want blue light for low-glare night ambiance and white light for general visibility without changing fixtures. Common placements include under-gunwale lighting for fishing setups, cockpit seating accents, cabin coves, and behind panels or furniture for soft indirect light.

Maintenance and care

Rinse salt residue and wipe the strip with mild soap and water as needed, especially in cockpit and transom areas. Periodically check that the adhesive bond and any mechanical retention points remain tight, and inspect wiring connections for corrosion protection. If the strip has been cut, confirm the sealed end remains intact so water does not migrate into the strip.

Orders are processed within 2 business days, which includes verification, packing, and dispatch. Orders of $100 or more qualify for free shipping when eligible. For orders under $100, shipping costs are calculated at checkout based on destination, package weight, and selected service. International shipping is available for eligible products, and certain items may require additional handling, warehouse transfers, or may ship directly from the manufacturer, which can affect processing time.

Deliveries are handled by preferred carriers such as USPS, UPS, FedEx, DHL, and others depending on your location and selected service. Estimated delivery times are displayed at checkout and may vary due to customs processing, carrier delays, weather, postal disruptions, or other circumstances beyond our control. Once your order ships, you'll receive a confirmation email with tracking information. Tracking may take up to 24 hours to update on the carrier's website and is also available through your account when applicable.

We ship throughout the United States and to most international destinations for products eligible for international shipping. International orders may be subject to customs duties, taxes, brokerage charges, or other import fees, which are the customer's responsibility and are not included in the product or shipping price. PO Boxes are accepted only when shipping through USPS, and not all packages qualify for this option. If your order does not arrive within the estimated delivery window, please contact us at info@apollolighting.com or +1 (954) 375-0100 so we can assist with locating your package.

Learn more.

Returns may be requested within 30 days of receiving your order. Items must be unused, uninstalled, unaltered, and returned in their original packaging with all tags, packing materials, blank warranty cards, manuals, instructions, accessories, and included items. Certain products, including installed or used electronics, electrical components, lighting, consumables, custom or special-order items, cut-to-length products, safety equipment, and merchandise exposed to water or marine conditions, may not be eligible for return.

To request a return, sign in to your account and select the applicable order and items, and submit your request for review. Eligible unfulfilled items may also be submitted for cancellation within 1 hour of placing the order. Returns or cancellations are not considered approved until you receive confirmation from Apollo Lighting. Please do not ship or drop off merchandise before receiving return approval and instructions.

Customers are responsible for arranging and paying for return shipping unless the return is due to an error by Apollo Lighting or the item is verified as defective, damaged, or incorrect. Missing, damaged, defective, or incorrect items must be reported within 2 business days of delivery, and photos or other documentation may be required for review. If the issue is verified, Apollo Lighting may provide or reimburse return shipping and issue a replacement or refund depending on the circumstances. International customers are responsible for return shipping, duties, taxes, customs charges, brokerage fees, and other costs associated with an international return.

After your return is received and inspected, approved refunds are issued to the original payment method and may take 5-7 business days to appear after processing. Original shipping and handling charges are nonrefundable, and the value of any included free items that are not returned may be deducted from the refund. Apollo Lighting does not charge a standard restocking fee on eligible returns. Returns that are incomplete, damaged, installed, used, altered, improperly packaged, or otherwise do not meet the eligibility requirements may be refused. We recommend using a trackable and appropriately insured shipping service for all customer-arranged returns.

For assistance, contact info@apollolighting.com or call +1 (954) 375-0100.

Learn more.

Many products sold by Apollo Lighting include a manufacturer's warranty covering defects in materials or workmanship. Warranty terms vary by brand, product category, and model, so eligibility, coverage duration, exclusions, and available remedies are determined by the applicable manufacturer. We recommend reviewing the warranty information provided with your product before installation or use, especially for marine electronics, navigation equipment, lighting, electrical systems, pumps, safety equipment, and other specialized marine products.

If you need warranty service, the claim must follow the process established by the manufacturer, authorized service center, or designated warranty provider. You may be asked for proof of purchase, a serial number, product registration, photos, maintenance or installation records, or other documentation. Apollo Lighting does not determine or modify a manufacturer's warranty coverage or final claim decision, but we are happy to help provide purchase information and direct you to the appropriate manufacturer or warranty resource.

Keep your receipt, product documentation, serial number information, and original packaging when practical. Damage caused by normal wear, misuse, improper installation, insufficient maintenance, corrosion, impact, unauthorized modifications, electrical issues, or operation outside the manufacturer's specifications may not be covered. Warranty claims are separate from standard returns, so a product that has been installed, used, or exposed to marine conditions may no longer qualify for return while still remaining eligible for evaluation under the manufacturer's applicable warranty.

Learn more.