Lumishore ECLIPSE SL100 LED Strip Light, 5m, Blue/White, 12V, IP68

Overview

The Lumishore 010-04485-00 is a 5 m dual-color strip light that lets you switch between blue and white light (5000 K white).

It runs on 12V DC systems only (10 to 15V DC). The strip is IP68-rated, fully encapsulated and potted, and measures 10.8 mm wide by 4.0 mm thick, so it fits into tight reveals under gunwales, coamings, and cabinetry.

For circuit planning, allow up to 0.5 A per meter (6 W/m). On the dual-color version, only one color channel should be powered at a time.

Key features

• 5 m strip length
• Switchable blue and white output, with white at 5000 K
• 12V DC only supply range (10 to 15V DC)
• Up to 0.5 A per meter (6 W/m) for load calculations
• IP68 ingress protection with fully encapsulated, potted construction
• Low-profile 10.8 mm x 4.0 mm cross section for narrow mounting spaces
• Cut to length in 50 mm steps, then seal the cut end before installation
• Simple 2-wire installation with control via an on/off/on switch or an Eclipse Command Center

Installation and setup

Lay the strip out straight before mounting and avoid twisting or bending it in the horizontal axis. Keep the bend radius to at least 50 mm and bend only in the vertical axis. For runs over 1 m, it helps to have a second person hold and uncoil the reel so the strip does not kink while you place it.

If trimming to fit, cut only at the marked cut points, then seal the cut end and allow the sealant to cure fully before handling. When using the adhesive backing, clean the mounting surface thoroughly and press along the edges of the strip rather than over the LEDs.

This strip can be installed indoors or in wet areas, but it is not intended for locations where it will be permanently submerged.

Electrical and control notes

Use a properly fused 12V feed and keep supply voltage within 10 to 15V DC. With dual-color wiring, do not connect both the blue and white channels so they can be on at the same time.

Basic switching supports on/off control and color selection. When used with an Eclipse Command Center, the same strip can also be dimmed and managed in zones where that system is installed.

Compatibility and fit

The 10.8 mm x 4.0 mm profile suits trim channels, toe-kicks, and other shallow recesses where you want light without a bulky housing. Plan your run around the full 5 m length and the 50 mm cut increments so your endpoints land cleanly at a cut point.

Use cases on board

Blue and white switching works well for cockpit and helm accent lighting, under-gunwale glow on fishing boats, and cabin courtesy lighting where you want a softer night option alongside neutral white. It is a good match for boats wired on 12V DC that need low-profile accent lighting in areas that see spray and routine washdowns.

Maintenance and care

Rinse salt residue when practical and avoid harsh chemical cleaners on the strip or freshly sealed ends. If the strip has been cut and sealed, check the sealed end during routine inspections, especially in high-splash locations.

Orders are processed within 2 business days, which includes verification, packing, and dispatch. Orders of $100 or more qualify for free shipping when eligible. For orders under $100, shipping costs are calculated at checkout based on destination, package weight, and selected service. International shipping is available for eligible products, and certain items may require additional handling, warehouse transfers, or may ship directly from the manufacturer, which can affect processing time.

Deliveries are handled by preferred carriers such as USPS, UPS, FedEx, DHL, and others depending on your location and selected service. Estimated delivery times are displayed at checkout and may vary due to customs processing, carrier delays, weather, postal disruptions, or other circumstances beyond our control. Once your order ships, you'll receive a confirmation email with tracking information. Tracking may take up to 24 hours to update on the carrier's website and is also available through your account when applicable.

We ship throughout the United States and to most international destinations for products eligible for international shipping. International orders may be subject to customs duties, taxes, brokerage charges, or other import fees, which are the customer's responsibility and are not included in the product or shipping price. PO Boxes are accepted only when shipping through USPS, and not all packages qualify for this option. If your order does not arrive within the estimated delivery window, please contact us at info@apollolighting.com or +1 (954) 375-0100 so we can assist with locating your package.

Learn more.

Returns may be requested within 30 days of receiving your order. Items must be unused, uninstalled, unaltered, and returned in their original packaging with all tags, packing materials, blank warranty cards, manuals, instructions, accessories, and included items. Certain products, including installed or used electronics, electrical components, lighting, consumables, custom or special-order items, cut-to-length products, safety equipment, and merchandise exposed to water or marine conditions, may not be eligible for return.

To request a return, sign in to your account and select the applicable order and items, and submit your request for review. Eligible unfulfilled items may also be submitted for cancellation within 1 hour of placing the order. Returns or cancellations are not considered approved until you receive confirmation from Apollo Lighting. Please do not ship or drop off merchandise before receiving return approval and instructions.

Customers are responsible for arranging and paying for return shipping unless the return is due to an error by Apollo Lighting or the item is verified as defective, damaged, or incorrect. Missing, damaged, defective, or incorrect items must be reported within 2 business days of delivery, and photos or other documentation may be required for review. If the issue is verified, Apollo Lighting may provide or reimburse return shipping and issue a replacement or refund depending on the circumstances. International customers are responsible for return shipping, duties, taxes, customs charges, brokerage fees, and other costs associated with an international return.

After your return is received and inspected, approved refunds are issued to the original payment method and may take 5-7 business days to appear after processing. Original shipping and handling charges are nonrefundable, and the value of any included free items that are not returned may be deducted from the refund. Apollo Lighting does not charge a standard restocking fee on eligible returns. Returns that are incomplete, damaged, installed, used, altered, improperly packaged, or otherwise do not meet the eligibility requirements may be refused. We recommend using a trackable and appropriately insured shipping service for all customer-arranged returns.

For assistance, contact info@apollolighting.com or call +1 (954) 375-0100.

Learn more.

Many products sold by Apollo Lighting include a manufacturer's warranty covering defects in materials or workmanship. Warranty terms vary by brand, product category, and model, so eligibility, coverage duration, exclusions, and available remedies are determined by the applicable manufacturer. We recommend reviewing the warranty information provided with your product before installation or use, especially for marine electronics, navigation equipment, lighting, electrical systems, pumps, safety equipment, and other specialized marine products.

If you need warranty service, the claim must follow the process established by the manufacturer, authorized service center, or designated warranty provider. You may be asked for proof of purchase, a serial number, product registration, photos, maintenance or installation records, or other documentation. Apollo Lighting does not determine or modify a manufacturer's warranty coverage or final claim decision, but we are happy to help provide purchase information and direct you to the appropriate manufacturer or warranty resource.

Keep your receipt, product documentation, serial number information, and original packaging when practical. Damage caused by normal wear, misuse, improper installation, insufficient maintenance, corrosion, impact, unauthorized modifications, electrical issues, or operation outside the manufacturer's specifications may not be covered. Warranty claims are separate from standard returns, so a product that has been installed, used, or exposed to marine conditions may no longer qualify for return while still remaining eligible for evaluation under the manufacturer's applicable warranty.

Learn more.