Hella Marine ValueFit Mini 6-LED Flood Light Bar, 10-30V, 18W, Bracket Mount

Overview

The Hella Marine Value Fit Mini 6 LED Flood Light Bar is a compact 6-LED flood light bar for deck and spreader lighting on 10-30 VDC systems, with an 18W load.

It uses a die-cast aluminum housing with a clear polycarbonate lens, and it carries an IP67 rating for exposed mounting areas that see spray and washdowns. Light output is listed at 1080 calculated lumens (about 800 lumens measured), with cool white light around 6000 K.

With an overall size of about 6.3 in wide, it fits neatly on hardtops, radar arches, masts, and cockpit areas when you need broad, close-range illumination for moving around the boat or working lines after dark.

Key features

• Multivolt input: 10-30 VDC for 12V and 24V boats
• 18W, 6-LED flood beam for close-range work and deck lighting
• Listed output: 1080 calculated lumens (about 800 lumens measured)
• IP67-rated housing with a clear polycarbonate lens for spray and washdowns
• Die-cast aluminum housing helps manage heat from the LEDs
• Adjustable stainless steel mounting bracket for aiming and vibration-prone installations
• Approximate size: 6.3 in W x 1.8 in H x 2.5 in D (160 x 45 x 60 mm)

Variants

This light bar is offered in two housing colors for a cleaner match with common tops, arches, and mounting locations.

The main difference is the exterior color; the electrical and lighting specs remain the same across the range.

• 357203001: Product color Black. A low-visibility look that blends in well on darker hardtops and T-top frames.
• 357203051: Product color White. A clean finish that matches white fiberglass and many factory arches.

What's included

• Value Fit Mini 6 LED Flood Light Bar
• Adjustable mounting bracket
• Mounting hardware
• Installation instructions

Installation and setup

The bracket-style mount works well on a hardtop, radar arch, mast spreader, or transom area where you can fasten into solid backing. Leave room for the bracket to tilt and for the wiring to route without rubbing on sharp edges.

On fiberglass, bed fasteners and any cable pass-through with a suitable marine sealant and add a drip loop before the wire enters the boat. Aim the flood beam toward the work area, then tighten the bracket hardware so it stays put under vibration.

Electrical and system integration

Wire it to a switched 10-30 VDC circuit and protect the run with a fuse or breaker sized for an 18W load. For longer runs, use marine-grade tinned cable sized to keep voltage drop under control.

Use cases on board

Use it as a spreader light on a sailboat to wash the foredeck, or as a compact cockpit and deck flood on a center console for rigging and docking. It suits boaters who want a small light bar with multivolt input and an IP67 rating for exposed mounting locations.

Maintenance and care

Rinse salt off the housing and bracket after trips and check fasteners periodically. If you re-aim the light, re-tighten the bracket hardware so the beam does not creep over time.

Orders are processed within 2 business days, which includes verification, packing, and dispatch. Orders of $100 or more qualify for free shipping when eligible. For orders under $100, shipping costs are calculated at checkout based on destination, package weight, and selected service. International shipping is available for eligible products, and certain items may require additional handling, warehouse transfers, or may ship directly from the manufacturer, which can affect processing time.

Deliveries are handled by preferred carriers such as USPS, UPS, FedEx, DHL, and others depending on your location and selected service. Estimated delivery times are displayed at checkout and may vary due to customs processing, carrier delays, weather, postal disruptions, or other circumstances beyond our control. Once your order ships, you'll receive a confirmation email with tracking information. Tracking may take up to 24 hours to update on the carrier's website and is also available through your account when applicable.

We ship throughout the United States and to most international destinations for products eligible for international shipping. International orders may be subject to customs duties, taxes, brokerage charges, or other import fees, which are the customer's responsibility and are not included in the product or shipping price. PO Boxes are accepted only when shipping through USPS, and not all packages qualify for this option. If your order does not arrive within the estimated delivery window, please contact us at info@apollolighting.com or +1 (954) 375-0100 so we can assist with locating your package.

Learn more.

Returns may be requested within 30 days of receiving your order. Items must be unused, uninstalled, unaltered, and returned in their original packaging with all tags, packing materials, blank warranty cards, manuals, instructions, accessories, and included items. Certain products, including installed or used electronics, electrical components, lighting, consumables, custom or special-order items, cut-to-length products, safety equipment, and merchandise exposed to water or marine conditions, may not be eligible for return.

To request a return, sign in to your account and select the applicable order and items, and submit your request for review. Eligible unfulfilled items may also be submitted for cancellation within 1 hour of placing the order. Returns or cancellations are not considered approved until you receive confirmation from Apollo Lighting. Please do not ship or drop off merchandise before receiving return approval and instructions.

Customers are responsible for arranging and paying for return shipping unless the return is due to an error by Apollo Lighting or the item is verified as defective, damaged, or incorrect. Missing, damaged, defective, or incorrect items must be reported within 2 business days of delivery, and photos or other documentation may be required for review. If the issue is verified, Apollo Lighting may provide or reimburse return shipping and issue a replacement or refund depending on the circumstances. International customers are responsible for return shipping, duties, taxes, customs charges, brokerage fees, and other costs associated with an international return.

After your return is received and inspected, approved refunds are issued to the original payment method and may take 5-7 business days to appear after processing. Original shipping and handling charges are nonrefundable, and the value of any included free items that are not returned may be deducted from the refund. Apollo Lighting does not charge a standard restocking fee on eligible returns. Returns that are incomplete, damaged, installed, used, altered, improperly packaged, or otherwise do not meet the eligibility requirements may be refused. We recommend using a trackable and appropriately insured shipping service for all customer-arranged returns.

For assistance, contact info@apollolighting.com or call +1 (954) 375-0100.

Learn more.

Many products sold by Apollo Lighting include a manufacturer's warranty covering defects in materials or workmanship. Warranty terms vary by brand, product category, and model, so eligibility, coverage duration, exclusions, and available remedies are determined by the applicable manufacturer. We recommend reviewing the warranty information provided with your product before installation or use, especially for marine electronics, navigation equipment, lighting, electrical systems, pumps, safety equipment, and other specialized marine products.

If you need warranty service, the claim must follow the process established by the manufacturer, authorized service center, or designated warranty provider. You may be asked for proof of purchase, a serial number, product registration, photos, maintenance or installation records, or other documentation. Apollo Lighting does not determine or modify a manufacturer's warranty coverage or final claim decision, but we are happy to help provide purchase information and direct you to the appropriate manufacturer or warranty resource.

Keep your receipt, product documentation, serial number information, and original packaging when practical. Damage caused by normal wear, misuse, improper installation, insufficient maintenance, corrosion, impact, unauthorized modifications, electrical issues, or operation outside the manufacturer's specifications may not be covered. Warranty claims are separate from standard returns, so a product that has been installed, used, or exposed to marine conditions may no longer qualify for return while still remaining eligible for evaluation under the manufacturer's applicable warranty.

Learn more.