Raymarine a-Series Power Cord, For a65/a67/a75/a77, 1.5m

Overview

The Raymarine R70159 is a 1.5 m power cord for Raymarine a-Series multifunction displays, including the a65, a67, a75 and a77. It is used to bring power to the display at the helm, console or nav station when replacing a missing lead, refreshing an older installation or keeping a spare cable on board.

This cord is a model-specific accessory, so fit depends on the display rather than the vessel type. For a clean installation, check the display model on the unit before ordering and route the 1.5 m cable with enough slack for service access while keeping it protected from chafe, sharp bends and vibration.

Key features

• 1.5 m cable length for short power runs behind a helm, dash panel or electronics pod.
• Fits Raymarine a65, a67, a75 and a77 multifunction displays.
• Useful as a replacement power cord when moving a compatible display to a new boat or restoring an existing a-Series installation.
• Model-specific Raymarine accessory, which helps avoid adapting a generic power lead at the display connection.
• Suited to marine electronics layouts where cable routing space is limited and excess cable should be kept manageable.

Compatibility and fit

This power cord is for the Raymarine a-Series display family listed above. It is not a general-purpose electrical cord set for every Raymarine display, and it should not be selected for other chartplotter families unless the display documentation or existing cable match confirms the same connection.

Installation and setup

Before installation, disconnect power to the electronics circuit and inspect the display power port for corrosion, bent pins or damage. Run the cable where it will not be pinched by panel hardware, steering components or service covers, and secure it so vibration at the helm does not load the connector.

After connection, verify polarity, circuit protection and the condition of the boat’s power feed according to the display installation requirements. A clean power feed is especially important on boats with shared electronics circuits, high-current accessories or long cable runs back to the battery switch panel.

Use cases on board

This cord is a practical match for owners servicing a compatible Raymarine a-Series helm display, marine electronics installers replacing a lost or damaged cable, and boat refit projects where an a65, a67, a75 or a77 is being reused in a new panel layout.

Orders are processed within 2 business days, which includes verification, packing, and dispatch. Orders of $100 or more qualify for free shipping when eligible. For orders under $100, shipping costs are calculated at checkout based on destination, package weight, and selected service. International shipping is available for eligible products, and certain items may require additional handling, warehouse transfers, or may ship directly from the manufacturer, which can affect processing time.

Deliveries are handled by preferred carriers such as USPS, UPS, FedEx, DHL, and others depending on your location and selected service. Estimated delivery times are displayed at checkout and may vary due to customs processing, carrier delays, weather, postal disruptions, or other circumstances beyond our control. Once your order ships, you'll receive a confirmation email with tracking information. Tracking may take up to 24 hours to update on the carrier's website and is also available through your account when applicable.

We ship throughout the United States and to most international destinations for products eligible for international shipping. International orders may be subject to customs duties, taxes, brokerage charges, or other import fees, which are the customer's responsibility and are not included in the product or shipping price. PO Boxes are accepted only when shipping through USPS, and not all packages qualify for this option. If your order does not arrive within the estimated delivery window, please contact us at info@apollolighting.com or +1 (954) 375-0100 so we can assist with locating your package.

Learn more.

Returns may be requested within 30 days of receiving your order. Items must be unused, uninstalled, unaltered, and returned in their original packaging with all tags, packing materials, blank warranty cards, manuals, instructions, accessories, and included items. Certain products, including installed or used electronics, electrical components, lighting, consumables, custom or special-order items, cut-to-length products, safety equipment, and merchandise exposed to water or marine conditions, may not be eligible for return.

To request a return, sign in to your account and select the applicable order and items, and submit your request for review. Eligible unfulfilled items may also be submitted for cancellation within 1 hour of placing the order. Returns or cancellations are not considered approved until you receive confirmation from Apollo Lighting. Please do not ship or drop off merchandise before receiving return approval and instructions.

Customers are responsible for arranging and paying for return shipping unless the return is due to an error by Apollo Lighting or the item is verified as defective, damaged, or incorrect. Missing, damaged, defective, or incorrect items must be reported within 2 business days of delivery, and photos or other documentation may be required for review. If the issue is verified, Apollo Lighting may provide or reimburse return shipping and issue a replacement or refund depending on the circumstances. International customers are responsible for return shipping, duties, taxes, customs charges, brokerage fees, and other costs associated with an international return.

After your return is received and inspected, approved refunds are issued to the original payment method and may take 5-7 business days to appear after processing. Original shipping and handling charges are nonrefundable, and the value of any included free items that are not returned may be deducted from the refund. Apollo Lighting does not charge a standard restocking fee on eligible returns. Returns that are incomplete, damaged, installed, used, altered, improperly packaged, or otherwise do not meet the eligibility requirements may be refused. We recommend using a trackable and appropriately insured shipping service for all customer-arranged returns.

For assistance, contact info@apollolighting.com or call +1 (954) 375-0100.

Learn more.

Many products sold by Apollo Lighting include a manufacturer's warranty covering defects in materials or workmanship. Warranty terms vary by brand, product category, and model, so eligibility, coverage duration, exclusions, and available remedies are determined by the applicable manufacturer. We recommend reviewing the warranty information provided with your product before installation or use, especially for marine electronics, navigation equipment, lighting, electrical systems, pumps, safety equipment, and other specialized marine products.

If you need warranty service, the claim must follow the process established by the manufacturer, authorized service center, or designated warranty provider. You may be asked for proof of purchase, a serial number, product registration, photos, maintenance or installation records, or other documentation. Apollo Lighting does not determine or modify a manufacturer's warranty coverage or final claim decision, but we are happy to help provide purchase information and direct you to the appropriate manufacturer or warranty resource.

Keep your receipt, product documentation, serial number information, and original packaging when practical. Damage caused by normal wear, misuse, improper installation, insufficient maintenance, corrosion, impact, unauthorized modifications, electrical issues, or operation outside the manufacturer's specifications may not be covered. Warranty claims are separate from standard returns, so a product that has been installed, used, or exposed to marine conditions may no longer qualify for return while still remaining eligible for evaluation under the manufacturer's applicable warranty.

Learn more.