Lumishore ECLIPSE SL100 LED Strip Light, RGB, 12V, IP68, 1m

Overview

The Lumishore 010-04537-00 is a 1 m RGB LED strip light for indirect accent lighting on board. It runs on 12V DC systems (10 to 15V) and draws up to 0.5A per meter (6W/m). The strip carries an IP68 ingress rating and uses a fully sealed, potted construction for wet locations, but it is not intended for permanent submersion.

This RGB version is controlled through an ECLIPSE Command Center rather than being wired straight to a basic switch. It is a practical fit for under-gunnel runs, toe-kicks, cockpit coamings, lockers, and other places where you want the light to stay mostly hidden while the glow carries across surfaces.

Key features

• 1 m RGB strip for hidden accent lighting in cockpits, cabins, and under furniture
• 12V DC only operation (10 to 15V input range)
• Up to 0.5A per meter current draw (6W per meter)
• IP68 ingress rating for wet areas and washdowns (not for permanent submersion)
• Fully sealed and potted construction to handle vibration and salt-air environments
• RGB control through an ECLIPSE Command Center; do not wire the RGB strip directly to a switch
• Minimum 50 mm bend radius in the vertical axis; avoid twisting or bending in the horizontal axis

Compatibility and fit

This strip is for 12V boats only. If your vessel is 24V, plan on a suitable 24V-to-12V conversion before the lighting controller and strip.

RGB operation requires an ECLIPSE Command Center. Keep different strip types on separate zones, and plan zone lengths with the controller limits in mind when you are building out multiple runs.

Installation and setup

Layout matters more than people expect with strip lighting. Dry-fit the run, confirm bend points, and route wiring so it is supported and protected from chafe. When trimming is needed, cut only at the marked cut points and seal the cut end so the assembly stays watertight.

For adhesive mounting, prep the surface so it is clean and oil-free, then press along the edges of the strip rather than pushing on the LED area. Let the adhesive set before powering up. In wet areas or where the strip needs tighter control, add mechanical fasteners or clips so the strip stays put over time.

Use cases on board

This style of strip lighting is commonly used to add a soft glow under gunwales, along cockpit seating bases, behind cabin trim, and inside storage spaces where overhead fixtures are awkward. It is a good match for owners who already run an ECLIPSE Command Center and want RGB accents that integrate into the same zone-based control.

Maintenance and care

Clean with a damp soft cloth or a soft brush. Avoid abrasive pads and cleaners that contain solvents, acids, or alkalis, and do not pressure wash the strip. For longevity, avoid mounting locations that see strong direct sunlight for long periods.

Orders are processed within 2 business days, which includes verification, packing, and dispatch. Orders of $100 or more qualify for free shipping when eligible. For orders under $100, shipping costs are calculated at checkout based on destination, package weight, and selected service. International shipping is available for eligible products, and certain items may require additional handling, warehouse transfers, or may ship directly from the manufacturer, which can affect processing time.

Deliveries are handled by preferred carriers such as USPS, UPS, FedEx, DHL, and others depending on your location and selected service. Estimated delivery times are displayed at checkout and may vary due to customs processing, carrier delays, weather, postal disruptions, or other circumstances beyond our control. Once your order ships, you'll receive a confirmation email with tracking information. Tracking may take up to 24 hours to update on the carrier's website and is also available through your account when applicable.

We ship throughout the United States and to most international destinations for products eligible for international shipping. International orders may be subject to customs duties, taxes, brokerage charges, or other import fees, which are the customer's responsibility and are not included in the product or shipping price. PO Boxes are accepted only when shipping through USPS, and not all packages qualify for this option. If your order does not arrive within the estimated delivery window, please contact us at info@apollolighting.com or +1 (954) 375-0100 so we can assist with locating your package.

Learn more.

Returns may be requested within 30 days of receiving your order. Items must be unused, uninstalled, unaltered, and returned in their original packaging with all tags, packing materials, blank warranty cards, manuals, instructions, accessories, and included items. Certain products, including installed or used electronics, electrical components, lighting, consumables, custom or special-order items, cut-to-length products, safety equipment, and merchandise exposed to water or marine conditions, may not be eligible for return.

To request a return, sign in to your account and select the applicable order and items, and submit your request for review. Eligible unfulfilled items may also be submitted for cancellation within 1 hour of placing the order. Returns or cancellations are not considered approved until you receive confirmation from Apollo Lighting. Please do not ship or drop off merchandise before receiving return approval and instructions.

Customers are responsible for arranging and paying for return shipping unless the return is due to an error by Apollo Lighting or the item is verified as defective, damaged, or incorrect. Missing, damaged, defective, or incorrect items must be reported within 2 business days of delivery, and photos or other documentation may be required for review. If the issue is verified, Apollo Lighting may provide or reimburse return shipping and issue a replacement or refund depending on the circumstances. International customers are responsible for return shipping, duties, taxes, customs charges, brokerage fees, and other costs associated with an international return.

After your return is received and inspected, approved refunds are issued to the original payment method and may take 5-7 business days to appear after processing. Original shipping and handling charges are nonrefundable, and the value of any included free items that are not returned may be deducted from the refund. Apollo Lighting does not charge a standard restocking fee on eligible returns. Returns that are incomplete, damaged, installed, used, altered, improperly packaged, or otherwise do not meet the eligibility requirements may be refused. We recommend using a trackable and appropriately insured shipping service for all customer-arranged returns.

For assistance, contact info@apollolighting.com or call +1 (954) 375-0100.

Learn more.

Many products sold by Apollo Lighting include a manufacturer's warranty covering defects in materials or workmanship. Warranty terms vary by brand, product category, and model, so eligibility, coverage duration, exclusions, and available remedies are determined by the applicable manufacturer. We recommend reviewing the warranty information provided with your product before installation or use, especially for marine electronics, navigation equipment, lighting, electrical systems, pumps, safety equipment, and other specialized marine products.

If you need warranty service, the claim must follow the process established by the manufacturer, authorized service center, or designated warranty provider. You may be asked for proof of purchase, a serial number, product registration, photos, maintenance or installation records, or other documentation. Apollo Lighting does not determine or modify a manufacturer's warranty coverage or final claim decision, but we are happy to help provide purchase information and direct you to the appropriate manufacturer or warranty resource.

Keep your receipt, product documentation, serial number information, and original packaging when practical. Damage caused by normal wear, misuse, improper installation, insufficient maintenance, corrosion, impact, unauthorized modifications, electrical issues, or operation outside the manufacturer's specifications may not be covered. Warranty claims are separate from standard returns, so a product that has been installed, used, or exposed to marine conditions may no longer qualify for return while still remaining eligible for evaluation under the manufacturer's applicable warranty.

Learn more.