Lumishore ECLIPSE SL100 LED Strip Light, 2.5m, RGB, 12V DC, IP68

Overview

The Lumishore 010-04538-00 is a 2.5 m RGB LED strip light for hidden accent lighting around a boat. It runs on 12V DC only (10 to 15V) and uses a simple 2-wire power connection, which keeps wiring straightforward for refits and new installs.

The strip is fully encapsulated and potted with an IP68 rating, so it holds up in damp lockers, cockpit coamings, under-gunwale runs, and other areas that see spray and washdowns. At 10.8 mm x 5.2 mm, it fits into tight channels where you want the light to stay out of sight while the glow stays visible.

Key features

• 2.5 m RGB LED strip for indirect accent lighting in concealed runs
• 12V DC only input range (10 to 15V) for standard boat electrical systems
• Simple 2-wire installation for clean power hookups
• IP68 rated and fully encapsulated/potted for wet areas and washdowns
• 60 LEDs per meter with a slim 10.8 mm x 5.2 mm cross section
• Rated draw of 0.5A per meter (6W/m) for circuit planning
• Can be cut to length and the cut end must be sealed before installation
• Control options include basic on/off switching or an ECLIPSE Command Center

Compatibility and fit

This strip is meant for 12V DC systems and is not a match for 24V house banks unless you add an appropriate 24V to 12V converter sized for the load. Before ordering, confirm you have space for the 10.8 mm x 5.2 mm profile along the full run and a route for the 2-wire feed back to a fused 12V supply.

Installation and setup

Plan the mounting path so the LEDs point toward a surface you want to wash with light, such as the underside of a gunwale lip or the face of a toe-kick. The strip can be cut to length, and sealing the cut end matters on a boat, especially in areas that see spray, condensation, or washdowns.

For wiring, keep splices above the lowest point of the run when you can, use marine-grade connections, and leave a little service loop at the feed end so the strip can be accessed later. If you are adding a controller or command center, allow room for it where it stays dry and accessible for troubleshooting.

Use on board

This is a good match for boat owners adding RGB accent lighting under gunwales, under seating, along steps, behind ceiling panels, or inside cabin joinery where you want the fixture hidden. It works well for dockside ambience, cockpit lighting during evening runs, and soft interior lighting without a visible fixture.

Maintenance and care

Rinse salt off when practical and avoid harsh solvents on the strip. Periodically check that the cut end seal and any wiring connections remain intact, especially in areas exposed to vibration and routine washdowns.

Orders are processed within 2 business days, which includes verification, packing, and dispatch. Orders of $100 or more qualify for free shipping when eligible. For orders under $100, shipping costs are calculated at checkout based on destination, package weight, and selected service. International shipping is available for eligible products, and certain items may require additional handling, warehouse transfers, or may ship directly from the manufacturer, which can affect processing time.

Deliveries are handled by preferred carriers such as USPS, UPS, FedEx, DHL, and others depending on your location and selected service. Estimated delivery times are displayed at checkout and may vary due to customs processing, carrier delays, weather, postal disruptions, or other circumstances beyond our control. Once your order ships, you'll receive a confirmation email with tracking information. Tracking may take up to 24 hours to update on the carrier's website and is also available through your account when applicable.

We ship throughout the United States and to most international destinations for products eligible for international shipping. International orders may be subject to customs duties, taxes, brokerage charges, or other import fees, which are the customer's responsibility and are not included in the product or shipping price. PO Boxes are accepted only when shipping through USPS, and not all packages qualify for this option. If your order does not arrive within the estimated delivery window, please contact us at info@apollolighting.com or +1 (954) 375-0100 so we can assist with locating your package.

Learn more.

Returns may be requested within 30 days of receiving your order. Items must be unused, uninstalled, unaltered, and returned in their original packaging with all tags, packing materials, blank warranty cards, manuals, instructions, accessories, and included items. Certain products, including installed or used electronics, electrical components, lighting, consumables, custom or special-order items, cut-to-length products, safety equipment, and merchandise exposed to water or marine conditions, may not be eligible for return.

To request a return, sign in to your account and select the applicable order and items, and submit your request for review. Eligible unfulfilled items may also be submitted for cancellation within 1 hour of placing the order. Returns or cancellations are not considered approved until you receive confirmation from Apollo Lighting. Please do not ship or drop off merchandise before receiving return approval and instructions.

Customers are responsible for arranging and paying for return shipping unless the return is due to an error by Apollo Lighting or the item is verified as defective, damaged, or incorrect. Missing, damaged, defective, or incorrect items must be reported within 2 business days of delivery, and photos or other documentation may be required for review. If the issue is verified, Apollo Lighting may provide or reimburse return shipping and issue a replacement or refund depending on the circumstances. International customers are responsible for return shipping, duties, taxes, customs charges, brokerage fees, and other costs associated with an international return.

After your return is received and inspected, approved refunds are issued to the original payment method and may take 5-7 business days to appear after processing. Original shipping and handling charges are nonrefundable, and the value of any included free items that are not returned may be deducted from the refund. Apollo Lighting does not charge a standard restocking fee on eligible returns. Returns that are incomplete, damaged, installed, used, altered, improperly packaged, or otherwise do not meet the eligibility requirements may be refused. We recommend using a trackable and appropriately insured shipping service for all customer-arranged returns.

For assistance, contact info@apollolighting.com or call +1 (954) 375-0100.

Learn more.

Many products sold by Apollo Lighting include a manufacturer's warranty covering defects in materials or workmanship. Warranty terms vary by brand, product category, and model, so eligibility, coverage duration, exclusions, and available remedies are determined by the applicable manufacturer. We recommend reviewing the warranty information provided with your product before installation or use, especially for marine electronics, navigation equipment, lighting, electrical systems, pumps, safety equipment, and other specialized marine products.

If you need warranty service, the claim must follow the process established by the manufacturer, authorized service center, or designated warranty provider. You may be asked for proof of purchase, a serial number, product registration, photos, maintenance or installation records, or other documentation. Apollo Lighting does not determine or modify a manufacturer's warranty coverage or final claim decision, but we are happy to help provide purchase information and direct you to the appropriate manufacturer or warranty resource.

Keep your receipt, product documentation, serial number information, and original packaging when practical. Damage caused by normal wear, misuse, improper installation, insufficient maintenance, corrosion, impact, unauthorized modifications, electrical issues, or operation outside the manufacturer's specifications may not be covered. Warranty claims are separate from standard returns, so a product that has been installed, used, or exposed to marine conditions may no longer qualify for return while still remaining eligible for evaluation under the manufacturer's applicable warranty.

Learn more.