Lumishore ECLIPSE SL100 RGB LED Strip Light, For ECLIPSE Command Center, 5m, 12V DC, IP68, 60 RGB LEDs/m

Overview

The Lumishore 010-04539-00 is a 5 m ECLIPSE SL100 RGB LED strip light for adding indirect accent lighting in cabins, cockpits, and other areas where you want light without a visible fixture.

It runs on 12 V DC systems (10 to 15 V) and uses a fully encapsulated, potted strip with an IP68 rating, so it can live behind panels, under gunwales, and in other spots that see spray and washdowns. The strip has 60 LEDs per meter in a clear housing and a slim 10.8 mm x 5.2 mm cross section, which helps when routing it through tight liner gaps and around trim.

The 5 m length can be cut to fit, and the cut end must be sealed after trimming. Color output is RGB, so a compatible controller is required when you want to change colors; power can still be switched on and off like any other 12 V accessory.

Key features

• 5 m RGB LED strip in a clear housing that can be cut to length and sealed after trimming
• 12 V DC input range: 10 to 15 V
• Up to 0.5 A per meter (6 W/m) for straightforward circuit planning
• IP68 rated, fully encapsulated and potted strip for wet lockers and washdown areas
• 60 LEDs per meter for even light along long runs
• Slim cross section: 10.8 mm x 5.2 mm
• Simple two-wire power connection; supports compatible ECLIPSE control hardware for RGB control

Installation and setup

Plan the run first, including where the strip will turn corners and where the power lead will land. Keep it away from sharp edges and moving hardware, and add strain relief anywhere the cable could get tugged by vibration or access panels.

When cutting to length, make the cut clean and seal the cut end before final installation so water cannot wick into the strip. Test the section before closing up liners or headliners.

Electrical and control integration

Wire it to a protected 12 V DC circuit within the 10 to 15 V input range. Power draw is up to 0.5 A per meter (6 W/m), which is useful when sizing the feed, fuse, and wire gauge for longer runs.

This strip is not intended for dimming. For color changes and effects, pair it with compatible ECLIPSE control hardware.

Use cases on board

Common installs include under gunwales, under seating bases, behind ceiling panels, and along toe-kicks for low-glare courtesy lighting. It is a good match for refits where you want hidden lighting that handles spray and quick washdowns without relying on a bulky fixture.

Maintenance and care

Rinse salt residue off during routine washdowns and avoid strong solvents on the strip. Periodically check the sealed end and cable routing for chafe, especially in lockers and under seats where gear can shift underway.

Orders are processed within 2 business days, which includes verification, packing, and dispatch. Orders of $100 or more qualify for free shipping when eligible. For orders under $100, shipping costs are calculated at checkout based on destination, package weight, and selected service. International shipping is available for eligible products, and certain items may require additional handling, warehouse transfers, or may ship directly from the manufacturer, which can affect processing time.

Deliveries are handled by preferred carriers such as USPS, UPS, FedEx, DHL, and others depending on your location and selected service. Estimated delivery times are displayed at checkout and may vary due to customs processing, carrier delays, weather, postal disruptions, or other circumstances beyond our control. Once your order ships, you'll receive a confirmation email with tracking information. Tracking may take up to 24 hours to update on the carrier's website and is also available through your account when applicable.

We ship throughout the United States and to most international destinations for products eligible for international shipping. International orders may be subject to customs duties, taxes, brokerage charges, or other import fees, which are the customer's responsibility and are not included in the product or shipping price. PO Boxes are accepted only when shipping through USPS, and not all packages qualify for this option. If your order does not arrive within the estimated delivery window, please contact us at info@apollolighting.com or +1 (954) 375-0100 so we can assist with locating your package.

Learn more.

Returns may be requested within 30 days of receiving your order. Items must be unused, uninstalled, unaltered, and returned in their original packaging with all tags, packing materials, blank warranty cards, manuals, instructions, accessories, and included items. Certain products, including installed or used electronics, electrical components, lighting, consumables, custom or special-order items, cut-to-length products, safety equipment, and merchandise exposed to water or marine conditions, may not be eligible for return.

To request a return, sign in to your account and select the applicable order and items, and submit your request for review. Eligible unfulfilled items may also be submitted for cancellation within 1 hour of placing the order. Returns or cancellations are not considered approved until you receive confirmation from Apollo Lighting. Please do not ship or drop off merchandise before receiving return approval and instructions.

Customers are responsible for arranging and paying for return shipping unless the return is due to an error by Apollo Lighting or the item is verified as defective, damaged, or incorrect. Missing, damaged, defective, or incorrect items must be reported within 2 business days of delivery, and photos or other documentation may be required for review. If the issue is verified, Apollo Lighting may provide or reimburse return shipping and issue a replacement or refund depending on the circumstances. International customers are responsible for return shipping, duties, taxes, customs charges, brokerage fees, and other costs associated with an international return.

After your return is received and inspected, approved refunds are issued to the original payment method and may take 5-7 business days to appear after processing. Original shipping and handling charges are nonrefundable, and the value of any included free items that are not returned may be deducted from the refund. Apollo Lighting does not charge a standard restocking fee on eligible returns. Returns that are incomplete, damaged, installed, used, altered, improperly packaged, or otherwise do not meet the eligibility requirements may be refused. We recommend using a trackable and appropriately insured shipping service for all customer-arranged returns.

For assistance, contact info@apollolighting.com or call +1 (954) 375-0100.

Learn more.

Many products sold by Apollo Lighting include a manufacturer's warranty covering defects in materials or workmanship. Warranty terms vary by brand, product category, and model, so eligibility, coverage duration, exclusions, and available remedies are determined by the applicable manufacturer. We recommend reviewing the warranty information provided with your product before installation or use, especially for marine electronics, navigation equipment, lighting, electrical systems, pumps, safety equipment, and other specialized marine products.

If you need warranty service, the claim must follow the process established by the manufacturer, authorized service center, or designated warranty provider. You may be asked for proof of purchase, a serial number, product registration, photos, maintenance or installation records, or other documentation. Apollo Lighting does not determine or modify a manufacturer's warranty coverage or final claim decision, but we are happy to help provide purchase information and direct you to the appropriate manufacturer or warranty resource.

Keep your receipt, product documentation, serial number information, and original packaging when practical. Damage caused by normal wear, misuse, improper installation, insufficient maintenance, corrosion, impact, unauthorized modifications, electrical issues, or operation outside the manufacturer's specifications may not be covered. Warranty claims are separate from standard returns, so a product that has been installed, used, or exposed to marine conditions may no longer qualify for return while still remaining eligible for evaluation under the manufacturer's applicable warranty.

Learn more.