Vimar IP55 2-Module Surface Enclosure, For Eikon/Arké/Plana, Grey

Overview

The Vimar VM14902 is a 2-module surface mounting enclosure that gives you an IP55 protected location for Vimar Eikon, Arké, or Plana devices. The housing is grey plastic and measures 6.8 x 8.3 x 6.6 cm.

It is a practical choice when you need a surface box on a bulkhead or liner and you want a wiring cavity that stands up to spray and routine washdowns around the helm, in the cockpit, or in service areas.

Key features

• IP55 enclosure format to handle spray and water jets when the full assembly is installed correctly
• 2-module surface box sized for Vimar Eikon, Arké, and Plana modular mechanisms
• Overall dimensions: 6.8 x 8.3 x 6.6 cm
• Plastic body with full insulating materials in the wiring space
• Approx. 94 g housing weight
• CE marked

Compatibility and fit

This is the surface enclosure body for a 2-module position. Confirm your device format and series before ordering, since module sizing and frames are specific to the Vimar range being used.

Depending on the final installation, you may also need the matching front cover or plate for the protected system and the chosen switch or outlet components.

Installation and setup

Mount the box to a flat, solid surface and keep cable runs tidy so the device can seat without forcing the wiring. If the mounting surface is thin or insulated, the insulated cavity helps keep conductors separated from the enclosure body.

Seal any penetrations through the mounting surface so water cannot track into the panel. The final protection level depends on correct assembly and careful sealing around the installation.

Use on board

This enclosure fits well on boats that are already standardized on Vimar modular hardware and need a protected surface-mount point where flush mounting is not possible. Typical locations include cockpit side panels, pilothouse bulkheads, lockers, and utility spaces that see damp air and occasional spray.

Maintenance and care

Rinse salt residue as needed and inspect the installed assembly periodically for loose fasteners, cable strain, or gaps around the mounting surface. Keeping the area clean helps the protected enclosure continue to do its job over time.

Orders are processed within 2 business days, which includes verification, packing, and dispatch. Orders of $100 or more qualify for free shipping when eligible. For orders under $100, shipping costs are calculated at checkout based on destination, package weight, and selected service. International shipping is available for eligible products, and certain items may require additional handling, warehouse transfers, or may ship directly from the manufacturer, which can affect processing time.

Deliveries are handled by preferred carriers such as USPS, UPS, FedEx, DHL, and others depending on your location and selected service. Estimated delivery times are displayed at checkout and may vary due to customs processing, carrier delays, weather, postal disruptions, or other circumstances beyond our control. Once your order ships, you'll receive a confirmation email with tracking information. Tracking may take up to 24 hours to update on the carrier's website and is also available through your account when applicable.

We ship throughout the United States and to most international destinations for products eligible for international shipping. International orders may be subject to customs duties, taxes, brokerage charges, or other import fees, which are the customer's responsibility and are not included in the product or shipping price. PO Boxes are accepted only when shipping through USPS, and not all packages qualify for this option. If your order does not arrive within the estimated delivery window, please contact us at info@apollolighting.com or +1 (954) 375-0100 so we can assist with locating your package.

Learn more.

Returns may be requested within 30 days of receiving your order. Items must be unused, uninstalled, unaltered, and returned in their original packaging with all tags, packing materials, blank warranty cards, manuals, instructions, accessories, and included items. Certain products, including installed or used electronics, electrical components, lighting, consumables, custom or special-order items, cut-to-length products, safety equipment, and merchandise exposed to water or marine conditions, may not be eligible for return.

To request a return, sign in to your account and select the applicable order and items, and submit your request for review. Eligible unfulfilled items may also be submitted for cancellation within 1 hour of placing the order. Returns or cancellations are not considered approved until you receive confirmation from Apollo Lighting. Please do not ship or drop off merchandise before receiving return approval and instructions.

Customers are responsible for arranging and paying for return shipping unless the return is due to an error by Apollo Lighting or the item is verified as defective, damaged, or incorrect. Missing, damaged, defective, or incorrect items must be reported within 2 business days of delivery, and photos or other documentation may be required for review. If the issue is verified, Apollo Lighting may provide or reimburse return shipping and issue a replacement or refund depending on the circumstances. International customers are responsible for return shipping, duties, taxes, customs charges, brokerage fees, and other costs associated with an international return.

After your return is received and inspected, approved refunds are issued to the original payment method and may take 5-7 business days to appear after processing. Original shipping and handling charges are nonrefundable, and the value of any included free items that are not returned may be deducted from the refund. Apollo Lighting does not charge a standard restocking fee on eligible returns. Returns that are incomplete, damaged, installed, used, altered, improperly packaged, or otherwise do not meet the eligibility requirements may be refused. We recommend using a trackable and appropriately insured shipping service for all customer-arranged returns.

For assistance, contact info@apollolighting.com or call +1 (954) 375-0100.

Learn more.

Many products sold by Apollo Lighting include a manufacturer's warranty covering defects in materials or workmanship. Warranty terms vary by brand, product category, and model, so eligibility, coverage duration, exclusions, and available remedies are determined by the applicable manufacturer. We recommend reviewing the warranty information provided with your product before installation or use, especially for marine electronics, navigation equipment, lighting, electrical systems, pumps, safety equipment, and other specialized marine products.

If you need warranty service, the claim must follow the process established by the manufacturer, authorized service center, or designated warranty provider. You may be asked for proof of purchase, a serial number, product registration, photos, maintenance or installation records, or other documentation. Apollo Lighting does not determine or modify a manufacturer's warranty coverage or final claim decision, but we are happy to help provide purchase information and direct you to the appropriate manufacturer or warranty resource.

Keep your receipt, product documentation, serial number information, and original packaging when practical. Damage caused by normal wear, misuse, improper installation, insufficient maintenance, corrosion, impact, unauthorized modifications, electrical issues, or operation outside the manufacturer's specifications may not be covered. Warranty claims are separate from standard returns, so a product that has been installed, used, or exposed to marine conditions may no longer qualify for return while still remaining eligible for evaluation under the manufacturer's applicable warranty.

Learn more.