Lumishore Lux SL/SNL 1m Strip Light Power Extension Cable

Overview

The Lumishore 010-14455-00 is a 1 m power extension cable for Lux SL/SNL strip light installations. It’s used when the factory lead does not quite reach the power feed or driver location, so you can keep the run clean without cutting and re-terminating wiring.

On boats, this is especially handy when strip lighting is tucked under gunwales, behind toe-kicks, inside lockers, or under hardtop overhangs and the cable needs to pass through a bulkhead or chase. Adding the correct length up front helps keep connections accessible for service instead of buried in tight cavities.

Key features

• 1 m extension length for planning a predictable run between components

• Intended for Lux SL/SNL strip light power connections

• Keeps the installation tidy when the light location is farther from the power feed or driver module

• Helps avoid mid-run splices that can be hard to seal and troubleshoot later

• Useful for routing through cabinetry, liners, and wire chases while still leaving a small service loop

Compatibility and fit

This cable is meant for Lux SL/SNL strip lighting setups. Before ordering, confirm the connection type on your existing Lux SL/SNL harness and measure the real path the cable will take on the boat, including turns, drip loops, and any extra slack you want for vibration and service access.

Installation and setup

Route the extension where it will stay protected from chafe, heat, and standing water. When passing through bulkheads or metal openings, use a proper grommet or cable gland and support the run so it does not hang on the connection point.

If you need to pull the cable through a tight chase, take your time and protect the ends during the pull. Leave enough slack to disconnect and reconnect later without having to remove trim panels or lighting tracks.

Use cases on board

This extension makes sense for refits and new installs where strip lights are mounted under cap rails, in cockpit coamings, or inside cabin joinery and the power feed is a bit farther away. It’s also a good match when you are keeping electronics and drivers in a dry, serviceable locker while the strip lights live out at the edges of the boat.

Maintenance and care

During routine checks, look for signs of chafe along the run and make sure the connection stays clean and fully seated. If lighting behavior becomes intermittent, the first quick check is the connection point and the cable’s routing around hinges, hatches, and sharp edges.

Orders are processed within 2 business days, which includes verification, packing, and dispatch. Orders of $100 or more qualify for free shipping when eligible. For orders under $100, shipping costs are calculated at checkout based on destination, package weight, and selected service. International shipping is available for eligible products, and certain items may require additional handling, warehouse transfers, or may ship directly from the manufacturer, which can affect processing time.

Deliveries are handled by preferred carriers such as USPS, UPS, FedEx, DHL, and others depending on your location and selected service. Estimated delivery times are displayed at checkout and may vary due to customs processing, carrier delays, weather, postal disruptions, or other circumstances beyond our control. Once your order ships, you'll receive a confirmation email with tracking information. Tracking may take up to 24 hours to update on the carrier's website and is also available through your account when applicable.

We ship throughout the United States and to most international destinations for products eligible for international shipping. International orders may be subject to customs duties, taxes, brokerage charges, or other import fees, which are the customer's responsibility and are not included in the product or shipping price. PO Boxes are accepted only when shipping through USPS, and not all packages qualify for this option. If your order does not arrive within the estimated delivery window, please contact us at info@apollolighting.com or +1 (954) 375-0100 so we can assist with locating your package.

Learn more.

Returns may be requested within 30 days of receiving your order. Items must be unused, uninstalled, unaltered, and returned in their original packaging with all tags, packing materials, blank warranty cards, manuals, instructions, accessories, and included items. Certain products, including installed or used electronics, electrical components, lighting, consumables, custom or special-order items, cut-to-length products, safety equipment, and merchandise exposed to water or marine conditions, may not be eligible for return.

To request a return, sign in to your account and select the applicable order and items, and submit your request for review. Eligible unfulfilled items may also be submitted for cancellation within 1 hour of placing the order. Returns or cancellations are not considered approved until you receive confirmation from Apollo Lighting. Please do not ship or drop off merchandise before receiving return approval and instructions.

Customers are responsible for arranging and paying for return shipping unless the return is due to an error by Apollo Lighting or the item is verified as defective, damaged, or incorrect. Missing, damaged, defective, or incorrect items must be reported within 2 business days of delivery, and photos or other documentation may be required for review. If the issue is verified, Apollo Lighting may provide or reimburse return shipping and issue a replacement or refund depending on the circumstances. International customers are responsible for return shipping, duties, taxes, customs charges, brokerage fees, and other costs associated with an international return.

After your return is received and inspected, approved refunds are issued to the original payment method and may take 5-7 business days to appear after processing. Original shipping and handling charges are nonrefundable, and the value of any included free items that are not returned may be deducted from the refund. Apollo Lighting does not charge a standard restocking fee on eligible returns. Returns that are incomplete, damaged, installed, used, altered, improperly packaged, or otherwise do not meet the eligibility requirements may be refused. We recommend using a trackable and appropriately insured shipping service for all customer-arranged returns.

For assistance, contact info@apollolighting.com or call +1 (954) 375-0100.

Learn more.

Many products sold by Apollo Lighting include a manufacturer's warranty covering defects in materials or workmanship. Warranty terms vary by brand, product category, and model, so eligibility, coverage duration, exclusions, and available remedies are determined by the applicable manufacturer. We recommend reviewing the warranty information provided with your product before installation or use, especially for marine electronics, navigation equipment, lighting, electrical systems, pumps, safety equipment, and other specialized marine products.

If you need warranty service, the claim must follow the process established by the manufacturer, authorized service center, or designated warranty provider. You may be asked for proof of purchase, a serial number, product registration, photos, maintenance or installation records, or other documentation. Apollo Lighting does not determine or modify a manufacturer's warranty coverage or final claim decision, but we are happy to help provide purchase information and direct you to the appropriate manufacturer or warranty resource.

Keep your receipt, product documentation, serial number information, and original packaging when practical. Damage caused by normal wear, misuse, improper installation, insufficient maintenance, corrosion, impact, unauthorized modifications, electrical issues, or operation outside the manufacturer's specifications may not be covered. Warranty claims are separate from standard returns, so a product that has been installed, used, or exposed to marine conditions may no longer qualify for return while still remaining eligible for evaluation under the manufacturer's applicable warranty.

Learn more.