Vimar Surface-Mount Junction Box, IP56, 100 x 100 x 50 mm, Undrilled Walls, Blind Cover, Stainless Steel Screws, RAL 7035 Grey

Overview

The Vimar VMV55204 is an IP56 surface-mount junction box in a 100 x 100 x 50 mm format for protecting splices and terminations where spray, washdowns, and vibration are part of normal boating life. It uses a plastic enclosure with a blind cover that screws down with stainless steel screws, helping keep the lid secure when wiring is tugged during service.

The walls are supplied undrilled, so cable glands or conduit entries can be placed where your run actually needs them while keeping the enclosure sealed. Rated insulation voltage Ui is 450 V and the working temperature range is 0°C to 60°C, which suits typical onboard locations that stay above freezing.

Key features

• IP56 protection for dust exposure and powerful water jets, suitable for wet lockers, consoles, and other splash-prone areas
• Surface-mount installation for wall or ceiling mounting on a flat bulkhead, panel, or underside of a deck
• Undrilled, smooth walls so you can place cable glands or conduit entries to match your routing
• Blind cover secured with stainless steel screws to hold closure under vibration and repeated access
• Grey RAL 7035 enclosure for a clean, consistent look in technical spaces
• Working temperature 0°C to 60°C and rated insulation voltage Ui 450 V for common onboard electrical environments

Installation and sealing

Mount the box to a solid surface where the cover screws can be accessed for inspection later. When drilling for entries, use properly sized cable glands or fittings and take care to keep swarf out of the enclosure before closing it up.

To preserve the IP rating, avoid routing cables so water can run directly into an entry point. A small drip loop in the cable and evenly tightening the cover screws helps the cover seat consistently.

Compatibility and fit

This enclosure is meant to provide a protected space for junctions, splices, and small internal connection hardware used in marine wiring. It is a practical choice when you need a serviceable junction point close to deck lights, cockpit accessories, sensors, pumps, or runs that transition through a bulkhead.

IP56 covers spray and washdowns, not permanent submersion, so it belongs in areas that can get wet but do not sit underwater.

Use on board

It suits owners and installers who want a neat junction point that is easy to reopen for troubleshooting without leaving connections exposed. It also fits refits where cable routing is not standardized and entry locations need to be drilled to match the vessel.

Orders are processed within 2 business days, which includes verification, packing, and dispatch. Orders of $100 or more qualify for free shipping when eligible. For orders under $100, shipping costs are calculated at checkout based on destination, package weight, and selected service. International shipping is available for eligible products, and certain items may require additional handling, warehouse transfers, or may ship directly from the manufacturer, which can affect processing time.

Deliveries are handled by preferred carriers such as USPS, UPS, FedEx, DHL, and others depending on your location and selected service. Estimated delivery times are displayed at checkout and may vary due to customs processing, carrier delays, weather, postal disruptions, or other circumstances beyond our control. Once your order ships, you'll receive a confirmation email with tracking information. Tracking may take up to 24 hours to update on the carrier's website and is also available through your account when applicable.

We ship throughout the United States and to most international destinations for products eligible for international shipping. International orders may be subject to customs duties, taxes, brokerage charges, or other import fees, which are the customer's responsibility and are not included in the product or shipping price. PO Boxes are accepted only when shipping through USPS, and not all packages qualify for this option. If your order does not arrive within the estimated delivery window, please contact us at info@apollolighting.com or +1 (954) 375-0100 so we can assist with locating your package.

Learn more.

Returns may be requested within 30 days of receiving your order. Items must be unused, uninstalled, unaltered, and returned in their original packaging with all tags, packing materials, blank warranty cards, manuals, instructions, accessories, and included items. Certain products, including installed or used electronics, electrical components, lighting, consumables, custom or special-order items, cut-to-length products, safety equipment, and merchandise exposed to water or marine conditions, may not be eligible for return.

To request a return, sign in to your account and select the applicable order and items, and submit your request for review. Eligible unfulfilled items may also be submitted for cancellation within 1 hour of placing the order. Returns or cancellations are not considered approved until you receive confirmation from Apollo Lighting. Please do not ship or drop off merchandise before receiving return approval and instructions.

Customers are responsible for arranging and paying for return shipping unless the return is due to an error by Apollo Lighting or the item is verified as defective, damaged, or incorrect. Missing, damaged, defective, or incorrect items must be reported within 2 business days of delivery, and photos or other documentation may be required for review. If the issue is verified, Apollo Lighting may provide or reimburse return shipping and issue a replacement or refund depending on the circumstances. International customers are responsible for return shipping, duties, taxes, customs charges, brokerage fees, and other costs associated with an international return.

After your return is received and inspected, approved refunds are issued to the original payment method and may take 5-7 business days to appear after processing. Original shipping and handling charges are nonrefundable, and the value of any included free items that are not returned may be deducted from the refund. Apollo Lighting does not charge a standard restocking fee on eligible returns. Returns that are incomplete, damaged, installed, used, altered, improperly packaged, or otherwise do not meet the eligibility requirements may be refused. We recommend using a trackable and appropriately insured shipping service for all customer-arranged returns.

For assistance, contact info@apollolighting.com or call +1 (954) 375-0100.

Learn more.

Many products sold by Apollo Lighting include a manufacturer's warranty covering defects in materials or workmanship. Warranty terms vary by brand, product category, and model, so eligibility, coverage duration, exclusions, and available remedies are determined by the applicable manufacturer. We recommend reviewing the warranty information provided with your product before installation or use, especially for marine electronics, navigation equipment, lighting, electrical systems, pumps, safety equipment, and other specialized marine products.

If you need warranty service, the claim must follow the process established by the manufacturer, authorized service center, or designated warranty provider. You may be asked for proof of purchase, a serial number, product registration, photos, maintenance or installation records, or other documentation. Apollo Lighting does not determine or modify a manufacturer's warranty coverage or final claim decision, but we are happy to help provide purchase information and direct you to the appropriate manufacturer or warranty resource.

Keep your receipt, product documentation, serial number information, and original packaging when practical. Damage caused by normal wear, misuse, improper installation, insufficient maintenance, corrosion, impact, unauthorized modifications, electrical issues, or operation outside the manufacturer's specifications may not be covered. Warranty claims are separate from standard returns, so a product that has been installed, used, or exposed to marine conditions may no longer qualify for return while still remaining eligible for evaluation under the manufacturer's applicable warranty.

Learn more.