Garmin Airmar CM599LHW Pocket-Mounted CHIRP Transducer, 1-3 kW, Low 28-60 kHz, High Wide 150-250 kHz, Bare Wire
SKU: APL729957 Part number: 010-12188-20 Barcode: 753759123628
Description
Overview
The Garmin 010-12188-20 is a pocket mounted CHIRP transducer (Airmar CM599LHW) that provides depth and water temperature to compatible Garmin sonar equipment using 28-60 kHz low CHIRP and 150-250 kHz high-wide CHIRP.
Low CHIRP is rated to 3 kW for deep water use with a beam that narrows from 11° x 23° down to 5° x 9° across the band. High-wide CHIRP runs 150-250 kHz at 1 kW with a 25° constant beam for broad coverage in shallower water. Maximum depth is 10,000 ft (3,048 m) on the low band and 500 ft (152 m) on the high-wide band.
This is a custom cavity or pocket installation that sits flush with the bottom of the hull, commonly in a wet box or welded tank. The transducer uses a 70 ft cable with bare-wire termination, so plan the cable route to the sounder location before the hull work starts.
Key features
- Dual-band CHIRP operation: 28-60 kHz (low) and 150-250 kHz (high wide)
- Power handling by band: 3 kW low CHIRP and 1 kW high-wide CHIRP
- Beam geometry that matches the job: low band narrows from 11° x 23° to 5° x 9°, high-wide stays at 25°
- Depth and fast-response water temperature sensing (no speed sensor)
- Pocket/cavity or welded-tank mount style for a flush install on fiberglass or metal hulls
- 70 ft cable with bare-wire termination for direct connection at the sounder or sonar module
- Urethane housing and acoustic window for wet-box style installations
- Xducer ID technology support for compatible systems
Compatibility and fit
Mounting style is tank, cavity, or pocket/keel mount and is commonly used on fiberglass or metal hulls. Because the pocket is built to match your hull, it can accommodate any deadrise angle, but you need interior clearance for the transducer body, cable routing, and fastening access.
This model is typically used on larger boats (25 ft and up) where a 2-3 kW class transducer and a flush installation make sense for offshore runs and heavier-duty fishing setups.
Installation and setup
This style of transducer requires a strong, watertight cavity or welded tank plus a faceplate to keep the unit secured when the boat is underway. Use a below-waterline marine sealant on the bedding surfaces and fasteners, and tighten the mounting bolts with a torque wrench to no more than 85 in-lb.
Choose a location where water flow stays clean with minimal bubbles and turbulence, and keep the transducer face flush with the hull for consistent bottom tracking. Route the cable with grommets or chafe protection and keep it separated from engine wiring and other high-current runs to reduce electrical noise.
After launch, check for leaks immediately and re-check within three hours.
Electrical and system integration
The cable terminates in bare wires, so the connection is made at the echosounder or sonar module following the wiring details for your Garmin system. If the cable must be spliced during the run, use a splash-proof junction method intended for transducer cabling.
Maintenance and care
For saltwater use, coat surfaces exposed below the waterline with a water-based antifouling made for transducers and refresh it about every six months. Avoid ketone-based antifouling paints and avoid solvents when cleaning.
Keep the face free of growth by cleaning with a mild detergent and a Scotch-Brite pad; heavy fouling can be removed with light wet sanding using fine wet/dry paper. Do not pressure wash or power sand the transducer.
Use on board
This transducer is a good match for offshore and commercial-style fishing boats that need deep-water capability on low CHIRP and more coverage when working the upper water column on high-wide CHIRP. It also fits high-speed hulls where a flush pocket installation helps protect the transducer and keep drag down.
010-12188-20Specifications
- Display
- No
- Product Color
- Black
- Product Material
- Plastic
- Product Type
- Transducer
- Frequency Response
- 150Hz-250kHz
- Operating Voltage
- N/A
- Power Consumption
- N/A
Reviews (0)
Shipping and delivery
Orders are processed within 2 business days, which includes verification, packing, and dispatch. Orders of $100 or more qualify for free shipping when eligible. For orders under $100, shipping costs are calculated at checkout based on destination, package weight, and selected service. International shipping is available for eligible products, and certain items may require additional handling, warehouse transfers, or may ship directly from the manufacturer, which can affect processing time.
Deliveries are handled by preferred carriers such as USPS, UPS, FedEx, DHL, and others depending on your location and selected service. Estimated delivery times are displayed at checkout and may vary due to customs processing, carrier delays, weather, postal disruptions, or other circumstances beyond our control. Once your order ships, you'll receive a confirmation email with tracking information. Tracking may take up to 24 hours to update on the carrier's website and is also available through your account when applicable.
We ship throughout the United States and to most international destinations for products eligible for international shipping. International orders may be subject to customs duties, taxes, brokerage charges, or other import fees, which are the customer's responsibility and are not included in the product or shipping price. PO Boxes are accepted only when shipping through USPS, and not all packages qualify for this option. If your order does not arrive within the estimated delivery window, please contact us at info@apollolighting.com or +1 (954) 375-0100 so we can assist with locating your package.
Learn more.
Returns and refunds
Returns may be requested within 30 days of receiving your order. Items must be unused, uninstalled, unaltered, and returned in their original packaging with all tags, packing materials, blank warranty cards, manuals, instructions, accessories, and included items. Certain products, including installed or used electronics, electrical components, lighting, consumables, custom or special-order items, cut-to-length products, safety equipment, and merchandise exposed to water or marine conditions, may not be eligible for return.
To request a return, sign in to your account and select the applicable order and items, and submit your request for review. Eligible unfulfilled items may also be submitted for cancellation within 1 hour of placing the order. Returns or cancellations are not considered approved until you receive confirmation from Apollo Lighting. Please do not ship or drop off merchandise before receiving return approval and instructions.
Customers are responsible for arranging and paying for return shipping unless the return is due to an error by Apollo Lighting or the item is verified as defective, damaged, or incorrect. Missing, damaged, defective, or incorrect items must be reported within 2 business days of delivery, and photos or other documentation may be required for review. If the issue is verified, Apollo Lighting may provide or reimburse return shipping and issue a replacement or refund depending on the circumstances. International customers are responsible for return shipping, duties, taxes, customs charges, brokerage fees, and other costs associated with an international return.
After your return is received and inspected, approved refunds are issued to the original payment method and may take 5-7 business days to appear after processing. Original shipping and handling charges are nonrefundable, and the value of any included free items that are not returned may be deducted from the refund. Apollo Lighting does not charge a standard restocking fee on eligible returns. Returns that are incomplete, damaged, installed, used, altered, improperly packaged, or otherwise do not meet the eligibility requirements may be refused. We recommend using a trackable and appropriately insured shipping service for all customer-arranged returns.
For assistance, contact info@apollolighting.com or call +1 (954) 375-0100.
Learn more.
Product warranty
Many products sold by Apollo Lighting include a manufacturer's warranty covering defects in materials or workmanship. Warranty terms vary by brand, product category, and model, so eligibility, coverage duration, exclusions, and available remedies are determined by the applicable manufacturer. We recommend reviewing the warranty information provided with your product before installation or use, especially for marine electronics, navigation equipment, lighting, electrical systems, pumps, safety equipment, and other specialized marine products.
If you need warranty service, the claim must follow the process established by the manufacturer, authorized service center, or designated warranty provider. You may be asked for proof of purchase, a serial number, product registration, photos, maintenance or installation records, or other documentation. Apollo Lighting does not determine or modify a manufacturer's warranty coverage or final claim decision, but we are happy to help provide purchase information and direct you to the appropriate manufacturer or warranty resource.
Keep your receipt, product documentation, serial number information, and original packaging when practical. Damage caused by normal wear, misuse, improper installation, insufficient maintenance, corrosion, impact, unauthorized modifications, electrical issues, or operation outside the manufacturer's specifications may not be covered. Warranty claims are separate from standard returns, so a product that has been installed, used, or exposed to marine conditions may no longer qualify for return while still remaining eligible for evaluation under the manufacturer's applicable warranty.
Learn more.

