Garmin Reactor 40 Hydraulic Autopilot Check Valve Kit, for 1.2L/2.0L Pumps

Overview

The Garmin 010-11203-10 is an autopilot check valve kit used with 1.2L and 2.0L hydraulic autopilot pumps to keep the pump isolated from the steering system when the autopilot is not active.

In practical terms, it helps stop slow pressure bleed-down through the pump while the autopilot is disengaged, so the helm feel stays more consistent during manual steering. It is commonly used on boats that do not have rudder trim tabs, or where trim tabs are not keeping the boat properly balanced.

Key features

• For hydraulic autopilot installations using 1.2L and 2.0L autopilot pumps
• Adds check valves to isolate the autopilot pump from the steering system when the autopilot is off
• Helps prevent slow pressure leak-down through the pump while disengaged
• Intended for Garmin Reactor 40 Hydraulic Autopilot systems
• Often unnecessary on boats with properly adjusted rudder trim tabs

Compatibility and fit

This kit is meant for Garmin hydraulic autopilot systems that use the 1.2L or 2.0L pump, including Reactor 40 Hydraulic Autopilot installations. If your setup matches those pump sizes, it addresses the common issue of steering pressure relaxing through the pump when the autopilot is not engaged.

If the boat already holds course cleanly under manual steering and the helm does not slowly "creep" with the autopilot off, you may not see a benefit. When the symptom is slow pressure leak-down through the pump, check valves are the typical fix.

Installation and setup

The check valves are installed in the hydraulic plumbing so flow behaves normally while you steer, while blocking backflow through the autopilot pump when it is disengaged. Any work that opens the steering circuit should be followed by a careful bleed and a lock-to-lock steering check at the dock.

After installation and the first sea trial, inspect all connections again for seepage and confirm the steering feel is smooth and predictable with the autopilot both engaged and disengaged.

Use notes on board

With the kit in place, the autopilot can engage as usual, and when you disengage it the steering system is less likely to slowly equalize through the pump. This is most noticeable on longer runs where the autopilot cycles on and off, or when holding a heading matters while you are setting lines, docking, or navigating tight channels.

This is a good match for hydraulic-steered boats that want the helm feel to stay consistent between manual driving and autopilot use, without needing constant trim adjustments.

Orders are processed within 2 business days, which includes verification, packing, and dispatch. Orders of $100 or more qualify for free shipping when eligible. For orders under $100, shipping costs are calculated at checkout based on destination, package weight, and selected service. International shipping is available for eligible products, and certain items may require additional handling, warehouse transfers, or may ship directly from the manufacturer, which can affect processing time.

Deliveries are handled by preferred carriers such as USPS, UPS, FedEx, DHL, and others depending on your location and selected service. Estimated delivery times are displayed at checkout and may vary due to customs processing, carrier delays, weather, postal disruptions, or other circumstances beyond our control. Once your order ships, you'll receive a confirmation email with tracking information. Tracking may take up to 24 hours to update on the carrier's website and is also available through your account when applicable.

We ship throughout the United States and to most international destinations for products eligible for international shipping. International orders may be subject to customs duties, taxes, brokerage charges, or other import fees, which are the customer's responsibility and are not included in the product or shipping price. PO Boxes are accepted only when shipping through USPS, and not all packages qualify for this option. If your order does not arrive within the estimated delivery window, please contact us at info@apollolighting.com or +1 (954) 375-0100 so we can assist with locating your package.

Learn more.

Returns may be requested within 30 days of receiving your order. Items must be unused, uninstalled, unaltered, and returned in their original packaging with all tags, packing materials, blank warranty cards, manuals, instructions, accessories, and included items. Certain products, including installed or used electronics, electrical components, lighting, consumables, custom or special-order items, cut-to-length products, safety equipment, and merchandise exposed to water or marine conditions, may not be eligible for return.

To request a return, sign in to your account and select the applicable order and items, and submit your request for review. Eligible unfulfilled items may also be submitted for cancellation within 1 hour of placing the order. Returns or cancellations are not considered approved until you receive confirmation from Apollo Lighting. Please do not ship or drop off merchandise before receiving return approval and instructions.

Customers are responsible for arranging and paying for return shipping unless the return is due to an error by Apollo Lighting or the item is verified as defective, damaged, or incorrect. Missing, damaged, defective, or incorrect items must be reported within 2 business days of delivery, and photos or other documentation may be required for review. If the issue is verified, Apollo Lighting may provide or reimburse return shipping and issue a replacement or refund depending on the circumstances. International customers are responsible for return shipping, duties, taxes, customs charges, brokerage fees, and other costs associated with an international return.

After your return is received and inspected, approved refunds are issued to the original payment method and may take 5-7 business days to appear after processing. Original shipping and handling charges are nonrefundable, and the value of any included free items that are not returned may be deducted from the refund. Apollo Lighting does not charge a standard restocking fee on eligible returns. Returns that are incomplete, damaged, installed, used, altered, improperly packaged, or otherwise do not meet the eligibility requirements may be refused. We recommend using a trackable and appropriately insured shipping service for all customer-arranged returns.

For assistance, contact info@apollolighting.com or call +1 (954) 375-0100.

Learn more.

Many products sold by Apollo Lighting include a manufacturer's warranty covering defects in materials or workmanship. Warranty terms vary by brand, product category, and model, so eligibility, coverage duration, exclusions, and available remedies are determined by the applicable manufacturer. We recommend reviewing the warranty information provided with your product before installation or use, especially for marine electronics, navigation equipment, lighting, electrical systems, pumps, safety equipment, and other specialized marine products.

If you need warranty service, the claim must follow the process established by the manufacturer, authorized service center, or designated warranty provider. You may be asked for proof of purchase, a serial number, product registration, photos, maintenance or installation records, or other documentation. Apollo Lighting does not determine or modify a manufacturer's warranty coverage or final claim decision, but we are happy to help provide purchase information and direct you to the appropriate manufacturer or warranty resource.

Keep your receipt, product documentation, serial number information, and original packaging when practical. Damage caused by normal wear, misuse, improper installation, insufficient maintenance, corrosion, impact, unauthorized modifications, electrical issues, or operation outside the manufacturer's specifications may not be covered. Warranty claims are separate from standard returns, so a product that has been installed, used, or exposed to marine conditions may no longer qualify for return while still remaining eligible for evaluation under the manufacturer's applicable warranty.

Learn more.