Garmin ECU Power Cable, For GHP 12 & GHP 20, Threaded Collar, 2.5m

Overview

The Garmin 010-11057-30 is an electronic control unit (ECU) power cable with a threaded-collar connector used to power a Garmin autopilot ECU during a GHP installation.

It runs from your boat’s battery or DC distribution to the ECU and gives you 2.5 m of length to route cleanly through lockers, consoles, or an equipment bay without putting tension on the connector.

This cable is intended for the Garmin GHP 12 Autopilot System and the Garmin GHP 20 Marine Autopilot System with SmartPump, where the ECU uses a threaded power connection.

Key features

• 2.5 m cable length for practical routing from the DC source to the ECU.
• Threaded-collar ECU connector to help keep the power connection tight after installation.
• Used as the battery-to-ECU power lead during Garmin GHP 12 and GHP 20 (with SmartPump) autopilot installs.
• Useful for replacements when the original power lead has been shortened, damaged, or removed during a refit.
• Supports clean rigging by letting you route the cable first and make the final ECU connection at the end.

Compatibility and fit

Confirm your autopilot system is a GHP 12 or a GHP 20 with SmartPump and that the ECU power port matches a threaded-collar plug. If your existing harness uses a different connector style, this cable will not seat correctly.

Installation and setup

Route the cable where it will stay protected from chafe. Use grommets through bulkheads, keep it clear of sharp edges, and leave a small service loop at the ECU so the connector is not carrying the cable’s weight.

Electrical and system integration

Connect the supply end to a clean DC feed from the battery or distribution panel and protect the circuit with the fuse or breaker value specified for your autopilot system. Verify polarity before powering up, and avoid sharing the feed with high-current loads that can introduce voltage drop.

Use cases on board

This cable is a practical match for new autopilot installs and for troubleshooting intermittent ECU power by swapping in a known-good power lead. It also suits boats where the ECU is mounted in a console, under a berth, or in an equipment locker and a full-length lead is needed to reach the DC source without splices.

Maintenance and care

After the first few outings, recheck cable routing and the threaded collar to make sure nothing has loosened. Inspect the run seasonally for abrasion points and resecure or replace the cable if the jacket shows wear.

Orders are processed within 2 business days, which includes verification, packing, and dispatch. Orders of $100 or more qualify for free shipping when eligible. For orders under $100, shipping costs are calculated at checkout based on destination, package weight, and selected service. International shipping is available for eligible products, and certain items may require additional handling, warehouse transfers, or may ship directly from the manufacturer, which can affect processing time.

Deliveries are handled by preferred carriers such as USPS, UPS, FedEx, DHL, and others depending on your location and selected service. Estimated delivery times are displayed at checkout and may vary due to customs processing, carrier delays, weather, postal disruptions, or other circumstances beyond our control. Once your order ships, you'll receive a confirmation email with tracking information. Tracking may take up to 24 hours to update on the carrier's website and is also available through your account when applicable.

We ship throughout the United States and to most international destinations for products eligible for international shipping. International orders may be subject to customs duties, taxes, brokerage charges, or other import fees, which are the customer's responsibility and are not included in the product or shipping price. PO Boxes are accepted only when shipping through USPS, and not all packages qualify for this option. If your order does not arrive within the estimated delivery window, please contact us at info@apollolighting.com or +1 (954) 375-0100 so we can assist with locating your package.

Learn more.

Returns may be requested within 30 days of receiving your order. Items must be unused, uninstalled, unaltered, and returned in their original packaging with all tags, packing materials, blank warranty cards, manuals, instructions, accessories, and included items. Certain products, including installed or used electronics, electrical components, lighting, consumables, custom or special-order items, cut-to-length products, safety equipment, and merchandise exposed to water or marine conditions, may not be eligible for return.

To request a return, sign in to your account and select the applicable order and items, and submit your request for review. Eligible unfulfilled items may also be submitted for cancellation within 1 hour of placing the order. Returns or cancellations are not considered approved until you receive confirmation from Apollo Lighting. Please do not ship or drop off merchandise before receiving return approval and instructions.

Customers are responsible for arranging and paying for return shipping unless the return is due to an error by Apollo Lighting or the item is verified as defective, damaged, or incorrect. Missing, damaged, defective, or incorrect items must be reported within 2 business days of delivery, and photos or other documentation may be required for review. If the issue is verified, Apollo Lighting may provide or reimburse return shipping and issue a replacement or refund depending on the circumstances. International customers are responsible for return shipping, duties, taxes, customs charges, brokerage fees, and other costs associated with an international return.

After your return is received and inspected, approved refunds are issued to the original payment method and may take 5-7 business days to appear after processing. Original shipping and handling charges are nonrefundable, and the value of any included free items that are not returned may be deducted from the refund. Apollo Lighting does not charge a standard restocking fee on eligible returns. Returns that are incomplete, damaged, installed, used, altered, improperly packaged, or otherwise do not meet the eligibility requirements may be refused. We recommend using a trackable and appropriately insured shipping service for all customer-arranged returns.

For assistance, contact info@apollolighting.com or call +1 (954) 375-0100.

Learn more.

Many products sold by Apollo Lighting include a manufacturer's warranty covering defects in materials or workmanship. Warranty terms vary by brand, product category, and model, so eligibility, coverage duration, exclusions, and available remedies are determined by the applicable manufacturer. We recommend reviewing the warranty information provided with your product before installation or use, especially for marine electronics, navigation equipment, lighting, electrical systems, pumps, safety equipment, and other specialized marine products.

If you need warranty service, the claim must follow the process established by the manufacturer, authorized service center, or designated warranty provider. You may be asked for proof of purchase, a serial number, product registration, photos, maintenance or installation records, or other documentation. Apollo Lighting does not determine or modify a manufacturer's warranty coverage or final claim decision, but we are happy to help provide purchase information and direct you to the appropriate manufacturer or warranty resource.

Keep your receipt, product documentation, serial number information, and original packaging when practical. Damage caused by normal wear, misuse, improper installation, insufficient maintenance, corrosion, impact, unauthorized modifications, electrical issues, or operation outside the manufacturer's specifications may not be covered. Warranty claims are separate from standard returns, so a product that has been installed, used, or exposed to marine conditions may no longer qualify for return while still remaining eligible for evaluation under the manufacturer's applicable warranty.

Learn more.