Lumitec Capri Flush-Mount LED Flood Light, White Light, White Finish, 10-30V, IP67, 530 lm, Dimmable, Ignition Protected

Overview

The Lumitec 101009 is a Capri LED flush-mount cockpit flood light that puts out 530 lumens of 6500 K white light while running on 10 to 30 V DC systems. It suits both 12 V and 24 V boats and works well anywhere you want a low-profile deck light, such as cockpits, aft decks, hardtops, and spreader areas.

Power draw is 12 W, with typical current of 900 mA at 12 V DC and 450 mA at 24 V DC, which makes it a practical swap for 55 W halogen floods when you want similar cockpit lighting without the heavy load on the battery. The face measures 4.94 in (12.56 cm) wide, 1.75 in (4.44 cm) high, and the body depth is 1.57 in (3.98 cm), so it helps to confirm clearance behind the mounting surface for the housing and wiring.

The sealed construction is IP67 compliant and the powder-coated die-cast aluminum housing is built to handle washdowns, spray, and vibration. Operating temperature range is -35 to 55 C.

Key features

• Runs on 10 to 30 V DC for use on 12 V and 24 V electrical systems
• 530 lumens white output at 6500 K, with CRI 65+
• 12 W load with typical draw of 0.9 A at 12 V and 0.45 A at 24 V
• IP67 compliant sealing for wet cockpits and routine washdowns
• Powder-coated die-cast aluminum housing with salt-spray testing up to 3,000 hours
• Compact flush-mount form factor: 4.94 in wide, 1.75 in high, 1.57 in deep
• Rated operating range from -35 to 55 C

Installation and setup

This is a flush-mount light, so installation involves cutting an opening in the mounting surface and securing the fixture so it cannot loosen over time. Before cutting, confirm you have room for the 1.57 in body depth plus wiring bend radius, and plan a dry routing path for the cable to the switch or breaker panel.

On cored fiberglass, seal the cutout and fastener penetrations so water cannot migrate into the core. Bedding the flange and tightening fasteners evenly helps keep the seal intact in a cockpit that gets regular spray and vibration.

Electrical and system integration

Wire it to a switched 10 to 30 V DC circuit using tinned marine conductors and properly crimped heat-shrink terminals. Because current draw is under 1 A on 12 V systems, voltage drop is usually easy to manage, but longer runs to hardtops, arches, or spreaders still benefit from appropriately sized wire and clean terminations.

Use cases on board

This light is a good match for boaters replacing older halogen floods to cut current draw during night docking, rigging lines, cockpit cleanup, or setting up gear at the dock. The cool white 6500 K output reads crisp in open cockpits and on work surfaces, which helps when you need coverage without adding bulky fixtures.

Notes and compliance

Warning: This product can expose you to chemicals known to the State of California to cause cancer, birth defects, or other reproductive harm. For more information visit P65Warnings.ca.gov.

Orders are processed within 2 business days, which includes verification, packing, and dispatch. Orders of $100 or more qualify for free shipping when eligible. For orders under $100, shipping costs are calculated at checkout based on destination, package weight, and selected service. International shipping is available for eligible products, and certain items may require additional handling, warehouse transfers, or may ship directly from the manufacturer, which can affect processing time.

Deliveries are handled by preferred carriers such as USPS, UPS, FedEx, DHL, and others depending on your location and selected service. Estimated delivery times are displayed at checkout and may vary due to customs processing, carrier delays, weather, postal disruptions, or other circumstances beyond our control. Once your order ships, you'll receive a confirmation email with tracking information. Tracking may take up to 24 hours to update on the carrier's website and is also available through your account when applicable.

We ship throughout the United States and to most international destinations for products eligible for international shipping. International orders may be subject to customs duties, taxes, brokerage charges, or other import fees, which are the customer's responsibility and are not included in the product or shipping price. PO Boxes are accepted only when shipping through USPS, and not all packages qualify for this option. If your order does not arrive within the estimated delivery window, please contact us at info@apollolighting.com or +1 (954) 375-0100 so we can assist with locating your package.

Learn more.

Returns may be requested within 30 days of receiving your order. Items must be unused, uninstalled, unaltered, and returned in their original packaging with all tags, packing materials, blank warranty cards, manuals, instructions, accessories, and included items. Certain products, including installed or used electronics, electrical components, lighting, consumables, custom or special-order items, cut-to-length products, safety equipment, and merchandise exposed to water or marine conditions, may not be eligible for return.

To request a return, sign in to your account and select the applicable order and items, and submit your request for review. Eligible unfulfilled items may also be submitted for cancellation within 1 hour of placing the order. Returns or cancellations are not considered approved until you receive confirmation from Apollo Lighting. Please do not ship or drop off merchandise before receiving return approval and instructions.

Customers are responsible for arranging and paying for return shipping unless the return is due to an error by Apollo Lighting or the item is verified as defective, damaged, or incorrect. Missing, damaged, defective, or incorrect items must be reported within 2 business days of delivery, and photos or other documentation may be required for review. If the issue is verified, Apollo Lighting may provide or reimburse return shipping and issue a replacement or refund depending on the circumstances. International customers are responsible for return shipping, duties, taxes, customs charges, brokerage fees, and other costs associated with an international return.

After your return is received and inspected, approved refunds are issued to the original payment method and may take 5-7 business days to appear after processing. Original shipping and handling charges are nonrefundable, and the value of any included free items that are not returned may be deducted from the refund. Apollo Lighting does not charge a standard restocking fee on eligible returns. Returns that are incomplete, damaged, installed, used, altered, improperly packaged, or otherwise do not meet the eligibility requirements may be refused. We recommend using a trackable and appropriately insured shipping service for all customer-arranged returns.

For assistance, contact info@apollolighting.com or call +1 (954) 375-0100.

Learn more.

Many products sold by Apollo Lighting include a manufacturer's warranty covering defects in materials or workmanship. Warranty terms vary by brand, product category, and model, so eligibility, coverage duration, exclusions, and available remedies are determined by the applicable manufacturer. We recommend reviewing the warranty information provided with your product before installation or use, especially for marine electronics, navigation equipment, lighting, electrical systems, pumps, safety equipment, and other specialized marine products.

If you need warranty service, the claim must follow the process established by the manufacturer, authorized service center, or designated warranty provider. You may be asked for proof of purchase, a serial number, product registration, photos, maintenance or installation records, or other documentation. Apollo Lighting does not determine or modify a manufacturer's warranty coverage or final claim decision, but we are happy to help provide purchase information and direct you to the appropriate manufacturer or warranty resource.

Keep your receipt, product documentation, serial number information, and original packaging when practical. Damage caused by normal wear, misuse, improper installation, insufficient maintenance, corrosion, impact, unauthorized modifications, electrical issues, or operation outside the manufacturer's specifications may not be covered. Warranty claims are separate from standard returns, so a product that has been installed, used, or exposed to marine conditions may no longer qualify for return while still remaining eligible for evaluation under the manufacturer's applicable warranty.

Learn more.