Raymarine TM185MW CHIRP Transom Mount Transducer, 1kW, Depth and Temperature, 60-100 kHz

Overview

The Raymarine A80803 is a TM185MW 1 kW CHIRP-ready transom-mount transducer for depth and fast-response water-temperature readings. It runs a medium CHIRP band from 60 to 100 kHz, with a wide port-to-starboard beam from 57° to 73° and a 16° average fore-and-aft beam, giving anglers broad coverage under the boat without moving to a through-hull installation.

This transducer is a practical fit for fishing boats, trailerable vessels, and smaller hulls where drilling for a through-hull transducer is not the right choice. The 1 kW power rating supports bottom tracking down to 400 m or 1,300 ft, while the medium frequency range helps with mid-depth target separation and coverage for pelagic fish in the upper water column.

The housing uses urethane with a stainless bracket, and the 9 m or 30 ft cable gives installers room to route the cable from the transom to the sonar equipment. It is made for transom angles from 2° to 22° and is rated for good performance at boat speeds below 30 knots when installed in clean water flow.

Key features

• 1 kW CHIRP-ready single-band transducer for depth and fast-response water-temperature sensing.
• Medium CHIRP frequency range from 60 to 100 kHz, giving 40 kHz of total bandwidth from one transducer.
• Wide 57° to 73° port-to-starboard beam helps cover more water below the boat when searching for fish.
• 16° average fore-and-aft beam helps keep the return focused in the boat’s direction of travel.
• Depth tracking capability down to 400 m or 1,300 ft, depending on conditions, installation, and sonar system setup.
• Transom mount format works well on small and trailered boats where a through-hull transducer may interfere with launching, loading, or hull layout.
• Urethane housing with stainless bracket for a mount location exposed to spray, vibration, and normal marine use.
• 9 m or 30 ft cable length supports clean routing from the transom toward the display or sonar module.
• Compatible with all hull materials because the sensor mounts on the transom rather than through the hull.
• Includes Xducer ID technology for transducer identification on compatible systems.

Installation and fit

The TM185MW mounts on the transom, so placement matters. It should sit where it can stay in smooth water flow, away from strakes, steps, through-hull fittings, and heavy turbulence from the propeller. On planing boats, careful positioning helps the transducer keep bottom and fish targets at speed.

The stated transom angle range is 2° to 22°. Before installation, the mounting area should be checked for space, cable routing, and clearance when the boat is on a trailer or lift. The transom mount format also makes future service easier than many through-hull installations because the unit remains accessible from outside the boat.

Sonar performance

The medium ultra-wide CHIRP band is useful for anglers who want coverage and target separation in the mid-depth range rather than a narrow, deep-only view. The broad port-to-starboard beam can help show bait, suspended fish, and pelagic activity across a wider area under the boat.

As with any high-power transducer, final performance depends on clean installation, hull shape, sea state, speed, and the connected sonar equipment. For the best results, the cable should be routed away from high-current wiring and secured so vibration and chafe do not damage it over time.

Use cases on board

This transducer suits fishing-focused boats that need CHIRP depth and water temperature from a transom installation. It is especially relevant for trailerable sportfishing boats, center consoles, and smaller leisure vessels where through-hull mounting is not practical or where easy maintenance is a priority.

For owners targeting fish in the upper water column and mid-depth zones, the medium frequency range and wide beam help build a fuller picture under the boat while still keeping the installation straightforward.

Maintenance and care

Because the transducer sits outside the hull, it should be inspected regularly for impact damage, marine growth, loose hardware, and cable wear. Keeping the acoustic face clean helps preserve sonar returns, especially in saltwater where fouling can build up quickly.

After trailering, launching, or running in debris, a quick visual check of the bracket and cable path can prevent small issues from turning into poor sonar performance or physical damage.

Orders are processed within 2 business days, which includes verification, packing, and dispatch. Orders of $100 or more qualify for free shipping when eligible. For orders under $100, shipping costs are calculated at checkout based on destination, package weight, and selected service. International shipping is available for eligible products, and certain items may require additional handling, warehouse transfers, or may ship directly from the manufacturer, which can affect processing time.

Deliveries are handled by preferred carriers such as USPS, UPS, FedEx, DHL, and others depending on your location and selected service. Estimated delivery times are displayed at checkout and may vary due to customs processing, carrier delays, weather, postal disruptions, or other circumstances beyond our control. Once your order ships, you'll receive a confirmation email with tracking information. Tracking may take up to 24 hours to update on the carrier's website and is also available through your account when applicable.

We ship throughout the United States and to most international destinations for products eligible for international shipping. International orders may be subject to customs duties, taxes, brokerage charges, or other import fees, which are the customer's responsibility and are not included in the product or shipping price. PO Boxes are accepted only when shipping through USPS, and not all packages qualify for this option. If your order does not arrive within the estimated delivery window, please contact us at info@apollolighting.com or +1 (954) 375-0100 so we can assist with locating your package.

Learn more.

Returns may be requested within 30 days of receiving your order. Items must be unused, uninstalled, unaltered, and returned in their original packaging with all tags, packing materials, blank warranty cards, manuals, instructions, accessories, and included items. Certain products, including installed or used electronics, electrical components, lighting, consumables, custom or special-order items, cut-to-length products, safety equipment, and merchandise exposed to water or marine conditions, may not be eligible for return.

To request a return, sign in to your account and select the applicable order and items, and submit your request for review. Eligible unfulfilled items may also be submitted for cancellation within 1 hour of placing the order. Returns or cancellations are not considered approved until you receive confirmation from Apollo Lighting. Please do not ship or drop off merchandise before receiving return approval and instructions.

Customers are responsible for arranging and paying for return shipping unless the return is due to an error by Apollo Lighting or the item is verified as defective, damaged, or incorrect. Missing, damaged, defective, or incorrect items must be reported within 2 business days of delivery, and photos or other documentation may be required for review. If the issue is verified, Apollo Lighting may provide or reimburse return shipping and issue a replacement or refund depending on the circumstances. International customers are responsible for return shipping, duties, taxes, customs charges, brokerage fees, and other costs associated with an international return.

After your return is received and inspected, approved refunds are issued to the original payment method and may take 5-7 business days to appear after processing. Original shipping and handling charges are nonrefundable, and the value of any included free items that are not returned may be deducted from the refund. Apollo Lighting does not charge a standard restocking fee on eligible returns. Returns that are incomplete, damaged, installed, used, altered, improperly packaged, or otherwise do not meet the eligibility requirements may be refused. We recommend using a trackable and appropriately insured shipping service for all customer-arranged returns.

For assistance, contact info@apollolighting.com or call +1 (954) 375-0100.

Learn more.

Many products sold by Apollo Lighting include a manufacturer's warranty covering defects in materials or workmanship. Warranty terms vary by brand, product category, and model, so eligibility, coverage duration, exclusions, and available remedies are determined by the applicable manufacturer. We recommend reviewing the warranty information provided with your product before installation or use, especially for marine electronics, navigation equipment, lighting, electrical systems, pumps, safety equipment, and other specialized marine products.

If you need warranty service, the claim must follow the process established by the manufacturer, authorized service center, or designated warranty provider. You may be asked for proof of purchase, a serial number, product registration, photos, maintenance or installation records, or other documentation. Apollo Lighting does not determine or modify a manufacturer's warranty coverage or final claim decision, but we are happy to help provide purchase information and direct you to the appropriate manufacturer or warranty resource.

Keep your receipt, product documentation, serial number information, and original packaging when practical. Damage caused by normal wear, misuse, improper installation, insufficient maintenance, corrosion, impact, unauthorized modifications, electrical issues, or operation outside the manufacturer's specifications may not be covered. Warranty claims are separate from standard returns, so a product that has been installed, used, or exposed to marine conditions may no longer qualify for return while still remaining eligible for evaluation under the manufacturer's applicable warranty.

Learn more.