B&G WS300 Mast Cable, For WS310/WS700 Wind Sensors, Pre-Molded Connectors

Overview

The B&G WS300 Cable Series is a mast cable with pre-molded connectors used to link WS310 and WS700 series wired wind sensors to the WS310/700 wired interface. It is offered in 20 m (65 ft) and 35 m (115 ft) lengths to match common mast heights and the real-world routing path from the masthead down to the electronics location.

On a sailboat, this is the run that gets tugged by vibration, worked by mast movement, and asked to survive years of stepping and unstepping. Using the correct length helps keep the cable supported inside the spar and lets you leave sensible service slack at the mast base and at the interface connection.

Key features

• Compatible mast cable for WS310 and WS700 series wired wind sensors
• Pre-molded connectors for a plug-in connection to the sensor system and interface
• Available lengths: 20 m (65 ft) and 35 m (115 ft)
• Built for full mast runs, from masthead sensor routing to the interface location below

Variants

This cable series is offered in multiple configurations to match different mast heights and cable routing paths.

Cable length is the main difference between variants. Confirm the length you need by measuring the mast run, deck transition, and the path to the wired interface, then allow extra for service loops and strain relief.

• 000-14396-001: 20 m (65 ft) cable. This length suits installations where the interface is close to the mast base and the internal mast route is straightforward.
• 000-14397-001: 35 m (115 ft) cable. The extra length helps when the mast is taller or when the route includes longer conduits, detours, or an interface mounted farther from the mast.

Compatibility and fit

This cable is intended for WS310 and WS700 series wired wind sensor setups that use the WS310/700 wired interface. It is not a generic extension cable, so the right match is about the sensor family and the connector style at both ends.

Installation and setup

Plan the run before pulling the cable. Inside the mast, keep it supported and protected from chafe at spreaders, exit points, and any conduit transitions. At the mast base and at the interface end, leave a small service loop and add strain relief so the connectors are not carrying the load.

Where the cable passes through the deck, use a proper gland or deck connector and keep the connection area dry. If the boat is stepped seasonally, label the ends so reconnecting is quick and you do not mix cables during commissioning.

Who this is a good match for

This cable series makes sense for cruising boats and race boats running a wired masthead wind sensor where you want a clean mast pull and a connectorized connection at the interface. It is also the straightforward replacement when an existing mast cable has been damaged during rig work or has developed intermittent data issues from years of movement.

Orders are processed within 2 business days, which includes verification, packing, and dispatch. Orders of $100 or more qualify for free shipping when eligible. For orders under $100, shipping costs are calculated at checkout based on destination, package weight, and selected service. International shipping is available for eligible products, and certain items may require additional handling, warehouse transfers, or may ship directly from the manufacturer, which can affect processing time.

Deliveries are handled by preferred carriers such as USPS, UPS, FedEx, DHL, and others depending on your location and selected service. Estimated delivery times are displayed at checkout and may vary due to customs processing, carrier delays, weather, postal disruptions, or other circumstances beyond our control. Once your order ships, you'll receive a confirmation email with tracking information. Tracking may take up to 24 hours to update on the carrier's website and is also available through your account when applicable.

We ship throughout the United States and to most international destinations for products eligible for international shipping. International orders may be subject to customs duties, taxes, brokerage charges, or other import fees, which are the customer's responsibility and are not included in the product or shipping price. PO Boxes are accepted only when shipping through USPS, and not all packages qualify for this option. If your order does not arrive within the estimated delivery window, please contact us at info@apollolighting.com or +1 (954) 375-0100 so we can assist with locating your package.

Learn more.

Returns may be requested within 30 days of receiving your order. Items must be unused, uninstalled, unaltered, and returned in their original packaging with all tags, packing materials, blank warranty cards, manuals, instructions, accessories, and included items. Certain products, including installed or used electronics, electrical components, lighting, consumables, custom or special-order items, cut-to-length products, safety equipment, and merchandise exposed to water or marine conditions, may not be eligible for return.

To request a return, sign in to your account and select the applicable order and items, and submit your request for review. Eligible unfulfilled items may also be submitted for cancellation within 1 hour of placing the order. Returns or cancellations are not considered approved until you receive confirmation from Apollo Lighting. Please do not ship or drop off merchandise before receiving return approval and instructions.

Customers are responsible for arranging and paying for return shipping unless the return is due to an error by Apollo Lighting or the item is verified as defective, damaged, or incorrect. Missing, damaged, defective, or incorrect items must be reported within 2 business days of delivery, and photos or other documentation may be required for review. If the issue is verified, Apollo Lighting may provide or reimburse return shipping and issue a replacement or refund depending on the circumstances. International customers are responsible for return shipping, duties, taxes, customs charges, brokerage fees, and other costs associated with an international return.

After your return is received and inspected, approved refunds are issued to the original payment method and may take 5-7 business days to appear after processing. Original shipping and handling charges are nonrefundable, and the value of any included free items that are not returned may be deducted from the refund. Apollo Lighting does not charge a standard restocking fee on eligible returns. Returns that are incomplete, damaged, installed, used, altered, improperly packaged, or otherwise do not meet the eligibility requirements may be refused. We recommend using a trackable and appropriately insured shipping service for all customer-arranged returns.

For assistance, contact info@apollolighting.com or call +1 (954) 375-0100.

Learn more.

Many products sold by Apollo Lighting include a manufacturer's warranty covering defects in materials or workmanship. Warranty terms vary by brand, product category, and model, so eligibility, coverage duration, exclusions, and available remedies are determined by the applicable manufacturer. We recommend reviewing the warranty information provided with your product before installation or use, especially for marine electronics, navigation equipment, lighting, electrical systems, pumps, safety equipment, and other specialized marine products.

If you need warranty service, the claim must follow the process established by the manufacturer, authorized service center, or designated warranty provider. You may be asked for proof of purchase, a serial number, product registration, photos, maintenance or installation records, or other documentation. Apollo Lighting does not determine or modify a manufacturer's warranty coverage or final claim decision, but we are happy to help provide purchase information and direct you to the appropriate manufacturer or warranty resource.

Keep your receipt, product documentation, serial number information, and original packaging when practical. Damage caused by normal wear, misuse, improper installation, insufficient maintenance, corrosion, impact, unauthorized modifications, electrical issues, or operation outside the manufacturer's specifications may not be covered. Warranty claims are separate from standard returns, so a product that has been installed, used, or exposed to marine conditions may no longer qualify for return while still remaining eligible for evaluation under the manufacturer's applicable warranty.

Learn more.