Hella Marine ValueFit Cube 4-LED Cube Light Kit, 2 Lights, 10-30V DC, Die-Cast Aluminum Housing, Wiring Harness with DT Connectors

Overview

The Hella Marine ValueFit Cube is a two-light LED kit used as a deck, spreader, or docking light on boats with 12V or 24V DC systems. It runs on 10-30V DC and uses four LEDs per lamp, drawing 12W each, with measured output of 690 lm (spot) or 600 lm (flood) depending on the version.

Each lamp uses a die-cast aluminum housing with a polycarbonate lens and an IP67 rating for rain and washdowns. The included harness, relay, fuse, and switch make it straightforward to wire as a dedicated auxiliary circuit at the helm, instead of tapping into an existing light feed.

This is a solid fit for skippers who want more usable light on the foredeck, cockpit, or around the dock without jumping to a full-size light bar.

Key features

• Two compact cube lamps with upright mounting brackets, easy to aim on a hardtop, radar arch, spreaders, or cockpit coamings
• 10-30V DC input for typical 12V and 24V boat electrical systems
• 4-LED optics with measured output tied to beam pattern: 690 lm (spot) or 600 lm (flood)
• IP67-rated lamp body with die-cast aluminum housing and polycarbonate lens for wet, exposed mounting locations
• Kit-style wiring with DT connectors, plus relay, fuse, and switch for a clean install and easier servicing later

Variants

This kit is offered in two configurations, listed here as Range options.

The difference between variants is the beam pattern. Spot concentrates light into a tighter cone for more reach, while flood spreads light wider for closer work areas.

• 357204821 Range: Close Range. Spot beam pattern with 690 lm measured output when you want a tighter throw down a dock line or ahead of the bow.
• 357204831 Range: Long Range. Flood beam pattern with 600 lm measured output when you want wider coverage across the foredeck, cockpit, or swim platform area.

What’s included

• Two LED lights with mounting brackets
• Wiring harness with DT connectors
• Relay
• Fuse
• Switch
• Mounting hardware
• Mounting instructions

Installation and setup

Plan the mounting location so the lamps can be aimed without the bracket hitting a handrail, spreader base, or canvas frame. The housings are compact at about 3.1 in wide by 3.4 in high by 3.2 in deep, which helps on tight arches and spreaders.

Route the harness away from sharp edges and moving rigging, and seal any deck penetrations properly. The relay and fuse are intended to be installed as part of the circuit, with the switch mounted where it is easy to reach from the helm.

Compatibility and on-board use

This is an auxiliary work-light style kit for DC systems (10-30V). It is commonly used to light up the bow for docking, to add spreader light on a sailboat, or to brighten a cockpit work area when handling lines at night.

When mounting high on a hardtop or spreaders, aim the lamps to avoid glare back into the cockpit and to keep light out of the helmsman’s direct line of sight.

Maintenance and care

For saltwater boats, a quick freshwater rinse after washdowns helps keep the lens clear and reduces buildup around the bracket hardware. Periodically re-check fasteners and cable support points, especially after rough runs or trailering.

Orders are processed within 2 business days, which includes verification, packing, and dispatch. Orders of $100 or more qualify for free shipping when eligible. For orders under $100, shipping costs are calculated at checkout based on destination, package weight, and selected service. International shipping is available for eligible products, and certain items may require additional handling, warehouse transfers, or may ship directly from the manufacturer, which can affect processing time.

Deliveries are handled by preferred carriers such as USPS, UPS, FedEx, DHL, and others depending on your location and selected service. Estimated delivery times are displayed at checkout and may vary due to customs processing, carrier delays, weather, postal disruptions, or other circumstances beyond our control. Once your order ships, you'll receive a confirmation email with tracking information. Tracking may take up to 24 hours to update on the carrier's website and is also available through your account when applicable.

We ship throughout the United States and to most international destinations for products eligible for international shipping. International orders may be subject to customs duties, taxes, brokerage charges, or other import fees, which are the customer's responsibility and are not included in the product or shipping price. PO Boxes are accepted only when shipping through USPS, and not all packages qualify for this option. If your order does not arrive within the estimated delivery window, please contact us at info@apollolighting.com or +1 (954) 375-0100 so we can assist with locating your package.

Learn more.

Returns may be requested within 30 days of receiving your order. Items must be unused, uninstalled, unaltered, and returned in their original packaging with all tags, packing materials, blank warranty cards, manuals, instructions, accessories, and included items. Certain products, including installed or used electronics, electrical components, lighting, consumables, custom or special-order items, cut-to-length products, safety equipment, and merchandise exposed to water or marine conditions, may not be eligible for return.

To request a return, sign in to your account and select the applicable order and items, and submit your request for review. Eligible unfulfilled items may also be submitted for cancellation within 1 hour of placing the order. Returns or cancellations are not considered approved until you receive confirmation from Apollo Lighting. Please do not ship or drop off merchandise before receiving return approval and instructions.

Customers are responsible for arranging and paying for return shipping unless the return is due to an error by Apollo Lighting or the item is verified as defective, damaged, or incorrect. Missing, damaged, defective, or incorrect items must be reported within 2 business days of delivery, and photos or other documentation may be required for review. If the issue is verified, Apollo Lighting may provide or reimburse return shipping and issue a replacement or refund depending on the circumstances. International customers are responsible for return shipping, duties, taxes, customs charges, brokerage fees, and other costs associated with an international return.

After your return is received and inspected, approved refunds are issued to the original payment method and may take 5-7 business days to appear after processing. Original shipping and handling charges are nonrefundable, and the value of any included free items that are not returned may be deducted from the refund. Apollo Lighting does not charge a standard restocking fee on eligible returns. Returns that are incomplete, damaged, installed, used, altered, improperly packaged, or otherwise do not meet the eligibility requirements may be refused. We recommend using a trackable and appropriately insured shipping service for all customer-arranged returns.

For assistance, contact info@apollolighting.com or call +1 (954) 375-0100.

Learn more.

Many products sold by Apollo Lighting include a manufacturer's warranty covering defects in materials or workmanship. Warranty terms vary by brand, product category, and model, so eligibility, coverage duration, exclusions, and available remedies are determined by the applicable manufacturer. We recommend reviewing the warranty information provided with your product before installation or use, especially for marine electronics, navigation equipment, lighting, electrical systems, pumps, safety equipment, and other specialized marine products.

If you need warranty service, the claim must follow the process established by the manufacturer, authorized service center, or designated warranty provider. You may be asked for proof of purchase, a serial number, product registration, photos, maintenance or installation records, or other documentation. Apollo Lighting does not determine or modify a manufacturer's warranty coverage or final claim decision, but we are happy to help provide purchase information and direct you to the appropriate manufacturer or warranty resource.

Keep your receipt, product documentation, serial number information, and original packaging when practical. Damage caused by normal wear, misuse, improper installation, insufficient maintenance, corrosion, impact, unauthorized modifications, electrical issues, or operation outside the manufacturer's specifications may not be covered. Warranty claims are separate from standard returns, so a product that has been installed, used, or exposed to marine conditions may no longer qualify for return while still remaining eligible for evaluation under the manufacturer's applicable warranty.

Learn more.