Lumitec Mirage Round Flush Mount LED Down Light, 10-30V DC, IP67, 3-6W

Overview

The Lumitec Mirage LED Downlight is a flush-mount LED downlight for overhead lighting on boats where you want a sealed fixture that can be used inside or outside. It runs on 10-30 VDC, is IP67 rated for washdowns, and is intended for cabins, cockpits, hardtops, T-tops, and similar locations rather than permanent underwater mounting.

Installation is based around a 2.00 inch mounting hole and spring clips. Face size depends on the trim style, with glass finish versions around 2.5 inches in diameter and bezel versions around 3.25 inches in diameter. Mounting depth is about 1.11 inches behind the surface, which helps in headliners and overhead panels where clearance is limited.

Electrical load varies by output, but plan roughly 360 to 480 mA on 12V systems or 180 to 260 mA on 24V systems. White output options include 5000K cool white and 3000K warm white, and multi-color versions add modes like RGBW or preset color combinations.

Key features

• 10-30 VDC input for 12V and 24V DC systems
• IP67 rating for exterior and interior overhead mounting where spray and washdowns happen
• Flush mount with spring-clip retention; installs from the front after cutting the mounting hole
• 2.00 inch cutout; face diameter varies by trim (about 2.5 inch glass finish or about 3.25 inch with a bezel)
• About 1.11 inch mounting depth behind the panel
• Color options include White, Warm White, RGBW, and multi-color combinations such as White/Blue or White/Red
• Dimmable configurations support brightness control from a standard on/off switch sequence; non-dimmable versions stay at a fixed output
• Polarity-sensitive two-wire hookup (black negative, white or red positive)

Variants

Mirage downlights are offered in multiple configurations that vary by light color, finish, and whether dimming is enabled.

Across the range you will see light outputs such as Warm White, RGBW, White/Blue, White/Red, and multi-color sets that include Red, Blue, and Purple. Finish options include a glass finish, a polished stainless steel bezel, and a white bezel, with both dimmable and non-dimmable versions available.

Installation and wiring

Cut the mounting hole with a hole saw, bring DC power to the location, and connect the light leads to the vessel’s circuit. The fixture is polarity sensitive, so connect the black lead to negative and the white or red lead to positive.

After wiring, compress the spring clips and push the light into the cutout until it seats against the surface. When multiple downlights share a circuit, size the fuse or breaker for the combined load.

Control and dimming

Many Mirage variants can be controlled from a simple SPST switch. On multi-color versions, a quick off/on toggle cycles through available colors, and leaving the switch off for a couple seconds resets the light back to its starting mode.

On dimmable versions, the white channel ramps up when powered on; a quick off/on toggle during the ramp locks in the brightness level. Non-dimmable versions do not use this ramp and do not change brightness.

Compatibility and fit

This light family uses a 2.00 inch cutout and fits shallow overhead cavities. Confirm you have room for about 1.11 inches of depth behind the mounting surface and enough clearance around the hole for the spring clips to open.

For exterior installs, route wiring so it stays protected from chafe and water intrusion, and leave enough slack to service the fixture if the panel is removed later.

Use cases on board

These downlights work well as general overhead lighting in cabins, galleys, heads, and walkways, and they also suit hardtops and T-top overhangs where a flush face that handles spray matters.

Multi-color and RGBW versions are a good match for boats that want different lighting modes for dockside, nighttime, and task lighting from the same fixture.

Regulatory notice

California Proposition 65 warning: This product can expose you to chemicals known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Orders are processed within 2 business days, which includes verification, packing, and dispatch. Orders of $100 or more qualify for free shipping when eligible. For orders under $100, shipping costs are calculated at checkout based on destination, package weight, and selected service. International shipping is available for eligible products, and certain items may require additional handling, warehouse transfers, or may ship directly from the manufacturer, which can affect processing time.

Deliveries are handled by preferred carriers such as USPS, UPS, FedEx, DHL, and others depending on your location and selected service. Estimated delivery times are displayed at checkout and may vary due to customs processing, carrier delays, weather, postal disruptions, or other circumstances beyond our control. Once your order ships, you'll receive a confirmation email with tracking information. Tracking may take up to 24 hours to update on the carrier's website and is also available through your account when applicable.

We ship throughout the United States and to most international destinations for products eligible for international shipping. International orders may be subject to customs duties, taxes, brokerage charges, or other import fees, which are the customer's responsibility and are not included in the product or shipping price. PO Boxes are accepted only when shipping through USPS, and not all packages qualify for this option. If your order does not arrive within the estimated delivery window, please contact us at info@apollolighting.com or +1 (954) 375-0100 so we can assist with locating your package.

Learn more.

Returns may be requested within 30 days of receiving your order. Items must be unused, uninstalled, unaltered, and returned in their original packaging with all tags, packing materials, blank warranty cards, manuals, instructions, accessories, and included items. Certain products, including installed or used electronics, electrical components, lighting, consumables, custom or special-order items, cut-to-length products, safety equipment, and merchandise exposed to water or marine conditions, may not be eligible for return.

To request a return, sign in to your account and select the applicable order and items, and submit your request for review. Eligible unfulfilled items may also be submitted for cancellation within 1 hour of placing the order. Returns or cancellations are not considered approved until you receive confirmation from Apollo Lighting. Please do not ship or drop off merchandise before receiving return approval and instructions.

Customers are responsible for arranging and paying for return shipping unless the return is due to an error by Apollo Lighting or the item is verified as defective, damaged, or incorrect. Missing, damaged, defective, or incorrect items must be reported within 2 business days of delivery, and photos or other documentation may be required for review. If the issue is verified, Apollo Lighting may provide or reimburse return shipping and issue a replacement or refund depending on the circumstances. International customers are responsible for return shipping, duties, taxes, customs charges, brokerage fees, and other costs associated with an international return.

After your return is received and inspected, approved refunds are issued to the original payment method and may take 5-7 business days to appear after processing. Original shipping and handling charges are nonrefundable, and the value of any included free items that are not returned may be deducted from the refund. Apollo Lighting does not charge a standard restocking fee on eligible returns. Returns that are incomplete, damaged, installed, used, altered, improperly packaged, or otherwise do not meet the eligibility requirements may be refused. We recommend using a trackable and appropriately insured shipping service for all customer-arranged returns.

For assistance, contact info@apollolighting.com or call +1 (954) 375-0100.

Learn more.

Many products sold by Apollo Lighting include a manufacturer's warranty covering defects in materials or workmanship. Warranty terms vary by brand, product category, and model, so eligibility, coverage duration, exclusions, and available remedies are determined by the applicable manufacturer. We recommend reviewing the warranty information provided with your product before installation or use, especially for marine electronics, navigation equipment, lighting, electrical systems, pumps, safety equipment, and other specialized marine products.

If you need warranty service, the claim must follow the process established by the manufacturer, authorized service center, or designated warranty provider. You may be asked for proof of purchase, a serial number, product registration, photos, maintenance or installation records, or other documentation. Apollo Lighting does not determine or modify a manufacturer's warranty coverage or final claim decision, but we are happy to help provide purchase information and direct you to the appropriate manufacturer or warranty resource.

Keep your receipt, product documentation, serial number information, and original packaging when practical. Damage caused by normal wear, misuse, improper installation, insufficient maintenance, corrosion, impact, unauthorized modifications, electrical issues, or operation outside the manufacturer's specifications may not be covered. Warranty claims are separate from standard returns, so a product that has been installed, used, or exposed to marine conditions may no longer qualify for return while still remaining eligible for evaluation under the manufacturer's applicable warranty.

Learn more.