Garmin GTEMP10-TH Thru-Hull Temp Sensor, NMEA 2000, 6 ft Cable

Overview

The Garmin 010-11413-10 is a GTEMP10-TH thru-hull temperature sensor that puts water temperature onto a NMEA 2000 network. It reads from -13 to 140 F and runs from 9 to 32 Vdc, so it fits common 12V and 24V systems. Power draw is about 0.24 W (20 mA at 12V), and the attached 1.8 m (6 ft) cable reaches a nearby backbone tee.

Install it to monitor livewell, baitwell, or the water you are fishing, then view the temperature on a compatible NMEA 2000 display. In multi-sensor setups, each sensor can be identified by location, and the temperature source, sensor instance, and offset can be adjusted from the NMEA 2000 device list.

Key features

• Thru-hull install supports hull thickness from 0 to 57 mm (0 to 2.25 in.).
• Mounting hole uses a 25 mm (1 in.) hole saw for the thru-hull opening.
• Water temperature sensing range: -13 to 140 F for baitwell, livewell, or outside water monitoring.
• NMEA 2000 plug-and-play connection; transmits temperature data (including PGNs 130312 and 130316) on the network.
• Wide power input from 9 to 32 Vdc with low draw of about 0.24 W (20 mA at 12V).
• Attached 1.8 m (6 ft) cable for a standard NMEA 2000 drop to the backbone.

What’s included

• GTEMP10-TH thru-hull temperature sensor with attached 1.8 m (6 ft) cable
• NMEA 2000 T-connector

Installation and setup

Choose a location where the sensor will not be jarred during launching, hauling, or storage, and confirm the hull thickness falls within the supported range. The install is a straightforward thru-hull pass-through: drill the 25 mm hole from outside the boat, fit the sensor, and bed it with marine sealant as you tighten it down.

On cored fiberglass, the core around the hole is relieved and sealed before final mounting so water cannot wick into the laminate. Metal hull installs call for cleaning and dressing the hole edges so the fitting sits properly and the sealant can do its job.

NMEA 2000 integration

This sensor is a NMEA 2000 device and connects like any other drop on a properly powered backbone with terminators. Once on the network, it shows up in the device list where you can assign the temperature source location, set an offset if needed, and manage sensor numbering when more than one temperature source is installed.

Use cases on board

This is a good match for anglers running a NMEA 2000 network who want temperature on-screen for tuning livewell and baitwell conditions or watching surface temperature changes while trolling. It also fits boats that already rely on network data at the helm and want a dedicated, thru-hull temperature point instead of a transom-mounted pickup.

Maintenance and care

During haul-out, check the fitting for any movement and inspect the bedding sealant around the flange. Keeping growth off the sensing area helps the reading respond normally, especially on boats that live in the water year-round.

Orders are processed within 2 business days, which includes verification, packing, and dispatch. Orders of $100 or more qualify for free shipping when eligible. For orders under $100, shipping costs are calculated at checkout based on destination, package weight, and selected service. International shipping is available for eligible products, and certain items may require additional handling, warehouse transfers, or may ship directly from the manufacturer, which can affect processing time.

Deliveries are handled by preferred carriers such as USPS, UPS, FedEx, DHL, and others depending on your location and selected service. Estimated delivery times are displayed at checkout and may vary due to customs processing, carrier delays, weather, postal disruptions, or other circumstances beyond our control. Once your order ships, you'll receive a confirmation email with tracking information. Tracking may take up to 24 hours to update on the carrier's website and is also available through your account when applicable.

We ship throughout the United States and to most international destinations for products eligible for international shipping. International orders may be subject to customs duties, taxes, brokerage charges, or other import fees, which are the customer's responsibility and are not included in the product or shipping price. PO Boxes are accepted only when shipping through USPS, and not all packages qualify for this option. If your order does not arrive within the estimated delivery window, please contact us at info@apollolighting.com or +1 (954) 375-0100 so we can assist with locating your package.

Learn more.

Returns may be requested within 30 days of receiving your order. Items must be unused, uninstalled, unaltered, and returned in their original packaging with all tags, packing materials, blank warranty cards, manuals, instructions, accessories, and included items. Certain products, including installed or used electronics, electrical components, lighting, consumables, custom or special-order items, cut-to-length products, safety equipment, and merchandise exposed to water or marine conditions, may not be eligible for return.

To request a return, sign in to your account and select the applicable order and items, and submit your request for review. Eligible unfulfilled items may also be submitted for cancellation within 1 hour of placing the order. Returns or cancellations are not considered approved until you receive confirmation from Apollo Lighting. Please do not ship or drop off merchandise before receiving return approval and instructions.

Customers are responsible for arranging and paying for return shipping unless the return is due to an error by Apollo Lighting or the item is verified as defective, damaged, or incorrect. Missing, damaged, defective, or incorrect items must be reported within 2 business days of delivery, and photos or other documentation may be required for review. If the issue is verified, Apollo Lighting may provide or reimburse return shipping and issue a replacement or refund depending on the circumstances. International customers are responsible for return shipping, duties, taxes, customs charges, brokerage fees, and other costs associated with an international return.

After your return is received and inspected, approved refunds are issued to the original payment method and may take 5-7 business days to appear after processing. Original shipping and handling charges are nonrefundable, and the value of any included free items that are not returned may be deducted from the refund. Apollo Lighting does not charge a standard restocking fee on eligible returns. Returns that are incomplete, damaged, installed, used, altered, improperly packaged, or otherwise do not meet the eligibility requirements may be refused. We recommend using a trackable and appropriately insured shipping service for all customer-arranged returns.

For assistance, contact info@apollolighting.com or call +1 (954) 375-0100.

Learn more.

Many products sold by Apollo Lighting include a manufacturer's warranty covering defects in materials or workmanship. Warranty terms vary by brand, product category, and model, so eligibility, coverage duration, exclusions, and available remedies are determined by the applicable manufacturer. We recommend reviewing the warranty information provided with your product before installation or use, especially for marine electronics, navigation equipment, lighting, electrical systems, pumps, safety equipment, and other specialized marine products.

If you need warranty service, the claim must follow the process established by the manufacturer, authorized service center, or designated warranty provider. You may be asked for proof of purchase, a serial number, product registration, photos, maintenance or installation records, or other documentation. Apollo Lighting does not determine or modify a manufacturer's warranty coverage or final claim decision, but we are happy to help provide purchase information and direct you to the appropriate manufacturer or warranty resource.

Keep your receipt, product documentation, serial number information, and original packaging when practical. Damage caused by normal wear, misuse, improper installation, insufficient maintenance, corrosion, impact, unauthorized modifications, electrical issues, or operation outside the manufacturer's specifications may not be covered. Warranty claims are separate from standard returns, so a product that has been installed, used, or exposed to marine conditions may no longer qualify for return while still remaining eligible for evaluation under the manufacturer's applicable warranty.

Learn more.