Lumitec Capri3 Retrofit Kit, For Capri and Capri2, White Housing, Spring Clip Mount

Overview

The Lumitec 101731 is a white retrofit housing kit that lets you mount a Capri3 flush-mount spreader or flood light in the existing recess from an earlier Capri or Capri2 light. It is meant for refits where you want the updated Capri3 mounting style while keeping the original cutout in your hardtop, tower, or arch.

The housing uses the same spring clip, clamp-in mounting style used by the Capri3 fixture, so the front face installs without exposed screws. Electrical performance is driven by the Capri3 light you pair it with, and Capri3 spreader lights run on 10-30 VDC for 12V and 24V systems.

Key features

• Retrofit housing for installing a Capri3 flush-mount light into an existing Capri or Capri2 recess
• Clamp-in, spring clip mounting style that keeps the face clean with no exposed fasteners
• White finish that blends in well on many hardtops, liners, and deck surfaces
• Helps avoid re-cutting or re-drilling when updating older Capri-series spreader and deck lights
• Covered by Lumitec limited warranty terms (5 years for products purchased on or after January 1, 2025)

Compatibility and fit

This retrofit kit is for boats that already have the recess from older Lumitec Capri or Capri2 flush-mount lights. It is used as the retrofit housing when stepping up to a Capri3 flush-mount fixture, so confirm you are installing a Capri3 light in the same location and that your existing cutout matches the earlier Capri-style recess.

Installation and setup

Typical install is a straightforward swap: remove the previous light, clean the recess, and check the wiring and sealing surface before bedding the housing as needed for your mounting area. The Capri3 light then seats into the retrofit housing and locks in with the Capri3 spring clips, which helps keep the installation tidy on a hardtop or tower where washdowns are common.

As with any exterior lighting on a boat, seal any disturbed penetrations to prevent water intrusion and keep wiring practices in line with ABYC guidance for circuit protection and connections.

Use on board

This retrofit kit makes sense for owners doing a hardtop or tower refresh who want the Capri3 mounting style without reworking gelcoat around the cutout. It is a practical fit for coastal cruisers and fishing boats that rely on spreader lighting at the dock, at anchor, and during night rigging.

Maintenance and care

Rinse the area after saltwater use and check the bedding line during routine inspections, especially on towers that see vibration. If you ever pull the light for service, inspect and renew sealing where needed before reinstalling.

Orders are processed within 2 business days, which includes verification, packing, and dispatch. Orders of $100 or more qualify for free shipping when eligible. For orders under $100, shipping costs are calculated at checkout based on destination, package weight, and selected service. International shipping is available for eligible products, and certain items may require additional handling, warehouse transfers, or may ship directly from the manufacturer, which can affect processing time.

Deliveries are handled by preferred carriers such as USPS, UPS, FedEx, DHL, and others depending on your location and selected service. Estimated delivery times are displayed at checkout and may vary due to customs processing, carrier delays, weather, postal disruptions, or other circumstances beyond our control. Once your order ships, you'll receive a confirmation email with tracking information. Tracking may take up to 24 hours to update on the carrier's website and is also available through your account when applicable.

We ship throughout the United States and to most international destinations for products eligible for international shipping. International orders may be subject to customs duties, taxes, brokerage charges, or other import fees, which are the customer's responsibility and are not included in the product or shipping price. PO Boxes are accepted only when shipping through USPS, and not all packages qualify for this option. If your order does not arrive within the estimated delivery window, please contact us at info@apollolighting.com or +1 (954) 375-0100 so we can assist with locating your package.

Learn more.

Returns may be requested within 30 days of receiving your order. Items must be unused, uninstalled, unaltered, and returned in their original packaging with all tags, packing materials, blank warranty cards, manuals, instructions, accessories, and included items. Certain products, including installed or used electronics, electrical components, lighting, consumables, custom or special-order items, cut-to-length products, safety equipment, and merchandise exposed to water or marine conditions, may not be eligible for return.

To request a return, sign in to your account and select the applicable order and items, and submit your request for review. Eligible unfulfilled items may also be submitted for cancellation within 1 hour of placing the order. Returns or cancellations are not considered approved until you receive confirmation from Apollo Lighting. Please do not ship or drop off merchandise before receiving return approval and instructions.

Customers are responsible for arranging and paying for return shipping unless the return is due to an error by Apollo Lighting or the item is verified as defective, damaged, or incorrect. Missing, damaged, defective, or incorrect items must be reported within 2 business days of delivery, and photos or other documentation may be required for review. If the issue is verified, Apollo Lighting may provide or reimburse return shipping and issue a replacement or refund depending on the circumstances. International customers are responsible for return shipping, duties, taxes, customs charges, brokerage fees, and other costs associated with an international return.

After your return is received and inspected, approved refunds are issued to the original payment method and may take 5-7 business days to appear after processing. Original shipping and handling charges are nonrefundable, and the value of any included free items that are not returned may be deducted from the refund. Apollo Lighting does not charge a standard restocking fee on eligible returns. Returns that are incomplete, damaged, installed, used, altered, improperly packaged, or otherwise do not meet the eligibility requirements may be refused. We recommend using a trackable and appropriately insured shipping service for all customer-arranged returns.

For assistance, contact info@apollolighting.com or call +1 (954) 375-0100.

Learn more.

Many products sold by Apollo Lighting include a manufacturer's warranty covering defects in materials or workmanship. Warranty terms vary by brand, product category, and model, so eligibility, coverage duration, exclusions, and available remedies are determined by the applicable manufacturer. We recommend reviewing the warranty information provided with your product before installation or use, especially for marine electronics, navigation equipment, lighting, electrical systems, pumps, safety equipment, and other specialized marine products.

If you need warranty service, the claim must follow the process established by the manufacturer, authorized service center, or designated warranty provider. You may be asked for proof of purchase, a serial number, product registration, photos, maintenance or installation records, or other documentation. Apollo Lighting does not determine or modify a manufacturer's warranty coverage or final claim decision, but we are happy to help provide purchase information and direct you to the appropriate manufacturer or warranty resource.

Keep your receipt, product documentation, serial number information, and original packaging when practical. Damage caused by normal wear, misuse, improper installation, insufficient maintenance, corrosion, impact, unauthorized modifications, electrical issues, or operation outside the manufacturer's specifications may not be covered. Warranty claims are separate from standard returns, so a product that has been installed, used, or exposed to marine conditions may no longer qualify for return while still remaining eligible for evaluation under the manufacturer's applicable warranty.

Learn more.