Vimar 3-Module Flush-Mount Floor Turret, For Eikon/Arké/Plana/Neve Devices, 120x120x60.5 mm, 3 Conduit Inlets, Metal, Includes Mounting Frame

Overview

The Vimar VMV54303 is a 3-module floor mounting box for Eikon, Arké, Plana, and Neve devices that installs on the V54903 floor box for a flush floor location.

It has a metal body with a 120 mm x 120 mm footprint and 60.5 mm depth, which helps when you are planning clearances under a sole or raised platform. Three conduit inlets make cable routing into the floor box cleaner and easier to service later.

This kind of hardware is a good match when you are building out a tidy switching or power point at floor level and you want the device mounting to stay rigid even with vibration and regular foot traffic.

Key features

• 3-module capacity for Vimar Eikon, Arké, Plana, and Neve device families
• Flush floor installation when used on the V54903 floor box
• Supplied with a 3-module mounting frame
• Three conduit inlets for bringing cables into the floor box
• Dimensions: 120 mm length, 120 mm width, 60.5 mm depth
• Metal construction with screw mounting method
• No built-in strain relief, so cables should be secured as part of the install
• CE marking and WEEE compliance

What’s included

• Floor mounting box
• 3-module mounting frame

Compatibility and fit

This mounting box is meant for 3-module layouts using devices from the Eikon, Arké, Plana, and Neve families. Before cutting or committing to placement, confirm you are building a 3-module point and that your floor box is the V54903 so the parts line up correctly.

Because this is floor hardware, it is worth checking underside clearance for wiring bend radius, conduit runs, and any structure below the sole.

Installation and setup

The unit mounts by screwing down to the floor box, and the three conduit inlets let you route incoming cables in a controlled way instead of relying on loose pass-throughs. Plan your cable paths so the device modules can be removed later without having to pull the whole run.

Since there are no strain relieves built in, add your own cable support in the floor box or just outside it, especially in areas that see movement or vibration. Keeping wires supported reduces stress on terminals and helps prevent intermittent faults over time.

Use on board

Common placements are cabin soles, helm areas, and workspaces where you want a clean switching point or a serviceable outlet location without adding a surface box. It also suits refits where existing Vimar device families are already used elsewhere on the boat and you want the same module format at floor level.

Maintenance and care

Periodically check that mounting screws stay snug and that the wiring inside the box is still properly supported. If the floor area is exposed to wet gear or washdowns, keeping the opening clean and free of grit helps prevent wear on the installed modules.

Orders are processed within 2 business days, which includes verification, packing, and dispatch. Orders of $100 or more qualify for free shipping when eligible. For orders under $100, shipping costs are calculated at checkout based on destination, package weight, and selected service. International shipping is available for eligible products, and certain items may require additional handling, warehouse transfers, or may ship directly from the manufacturer, which can affect processing time.

Deliveries are handled by preferred carriers such as USPS, UPS, FedEx, DHL, and others depending on your location and selected service. Estimated delivery times are displayed at checkout and may vary due to customs processing, carrier delays, weather, postal disruptions, or other circumstances beyond our control. Once your order ships, you'll receive a confirmation email with tracking information. Tracking may take up to 24 hours to update on the carrier's website and is also available through your account when applicable.

We ship throughout the United States and to most international destinations for products eligible for international shipping. International orders may be subject to customs duties, taxes, brokerage charges, or other import fees, which are the customer's responsibility and are not included in the product or shipping price. PO Boxes are accepted only when shipping through USPS, and not all packages qualify for this option. If your order does not arrive within the estimated delivery window, please contact us at info@apollolighting.com or +1 (954) 375-0100 so we can assist with locating your package.

Learn more.

Returns may be requested within 30 days of receiving your order. Items must be unused, uninstalled, unaltered, and returned in their original packaging with all tags, packing materials, blank warranty cards, manuals, instructions, accessories, and included items. Certain products, including installed or used electronics, electrical components, lighting, consumables, custom or special-order items, cut-to-length products, safety equipment, and merchandise exposed to water or marine conditions, may not be eligible for return.

To request a return, sign in to your account and select the applicable order and items, and submit your request for review. Eligible unfulfilled items may also be submitted for cancellation within 1 hour of placing the order. Returns or cancellations are not considered approved until you receive confirmation from Apollo Lighting. Please do not ship or drop off merchandise before receiving return approval and instructions.

Customers are responsible for arranging and paying for return shipping unless the return is due to an error by Apollo Lighting or the item is verified as defective, damaged, or incorrect. Missing, damaged, defective, or incorrect items must be reported within 2 business days of delivery, and photos or other documentation may be required for review. If the issue is verified, Apollo Lighting may provide or reimburse return shipping and issue a replacement or refund depending on the circumstances. International customers are responsible for return shipping, duties, taxes, customs charges, brokerage fees, and other costs associated with an international return.

After your return is received and inspected, approved refunds are issued to the original payment method and may take 5-7 business days to appear after processing. Original shipping and handling charges are nonrefundable, and the value of any included free items that are not returned may be deducted from the refund. Apollo Lighting does not charge a standard restocking fee on eligible returns. Returns that are incomplete, damaged, installed, used, altered, improperly packaged, or otherwise do not meet the eligibility requirements may be refused. We recommend using a trackable and appropriately insured shipping service for all customer-arranged returns.

For assistance, contact info@apollolighting.com or call +1 (954) 375-0100.

Learn more.

Many products sold by Apollo Lighting include a manufacturer's warranty covering defects in materials or workmanship. Warranty terms vary by brand, product category, and model, so eligibility, coverage duration, exclusions, and available remedies are determined by the applicable manufacturer. We recommend reviewing the warranty information provided with your product before installation or use, especially for marine electronics, navigation equipment, lighting, electrical systems, pumps, safety equipment, and other specialized marine products.

If you need warranty service, the claim must follow the process established by the manufacturer, authorized service center, or designated warranty provider. You may be asked for proof of purchase, a serial number, product registration, photos, maintenance or installation records, or other documentation. Apollo Lighting does not determine or modify a manufacturer's warranty coverage or final claim decision, but we are happy to help provide purchase information and direct you to the appropriate manufacturer or warranty resource.

Keep your receipt, product documentation, serial number information, and original packaging when practical. Damage caused by normal wear, misuse, improper installation, insufficient maintenance, corrosion, impact, unauthorized modifications, electrical issues, or operation outside the manufacturer's specifications may not be covered. Warranty claims are separate from standard returns, so a product that has been installed, used, or exposed to marine conditions may no longer qualify for return while still remaining eligible for evaluation under the manufacturer's applicable warranty.

Learn more.