Skip to content

Free shipping over $100. Learn more.

Free 30-days returns. Learn more.

Give us a call at 954-375-0100!

Account Cart

Shop all Vimar

Vimar By-me Multifunction 4-Output Relay Actuator, Marine Version, 4 x 16A, 120-230V AC, DIN Rail 4 Modules, IP20

SKU: APL869900 Part number: VM01974 Barcode: 8007352539532

Regular price $259.90 USD
Sold out

Description

Overview

The Vimar VM01974 is a multifunction automated actuator for By-me automation systems that switches up to four AC circuits using 4 change-over relay outputs rated 16 A at 120 to 230 V~. It mounts on a DIN (60715 TH35) rail and takes up 4 modules (17.5 mm each), so it fits neatly in an automation cabinet or electrical distribution panel.

On board, it is typically used to centralize switching for zone lighting, fan-coil control, and motorized blinds or shutters where paired relays are needed for direction control. The electronics are powered from the By-me BUS (29 V) with a typical current draw of 20 mA, and the front panel includes relay status LEDs plus local push-buttons, including a manual mode enable/disable button for service checks.

This unit is IP20 and intended for protected indoor installations. It is suited to marine environments where equipment is kept inside enclosures and has been tested for cyclic salt mist and vibration, with an operating temperature range of -5 to +45 C.

Key features
  • 4 x 16 A change-over relay outputs (NC, C, NO) for switching multiple circuits from a single DIN device
  • Switching for 120 to 230 V~ 50/60 Hz loads, with practical ratings including 16 A resistive and 3.5 A motors (cos phi 0.6)
  • Relay pairs can be grouped for roller shutter or blind motor control (up/down) when configured for paired operation
  • By-me BUS powered (29 V) with typical 20 mA draw, keeping control wiring separate from the switched power circuits
  • Front LEDs for relay status plus local push-buttons, including a manual mode button for on-panel testing
  • DIN rail mounting (60715 TH35), 4-module width for tidy panel layouts
  • IP20 protection class for installation inside dry, protected electrical enclosures
Installation and setup

Plan to mount the actuator inside a switchboard, electrical locker, or automation enclosure where it stays dry and protected from washdowns. Allow enough clearance for wiring and strain relief, and label each output at the panel so future troubleshooting is straightforward. Because this unit switches mains voltage, installation is best handled by a qualified marine electrician following local electrical codes and onboard best practices.

Electrical and system integration

The four outputs are intended for 120 to 230 V~ loads, so treat the relay terminals as mains voltage and route wiring accordingly. Overcurrent protection for each switched circuit should be sized appropriately, with protective devices not exceeding 16 A on the relay outputs. If your system includes both SELV and mains circuits, keep them separated at the panel and avoid mixing low-voltage wiring on adjacent outputs that are carrying mains voltage.

Load type matters for relay sizing. This unit supports common onboard AC loads such as resistive heaters up to 16 A, incandescent lighting up to 8 A, electronic transformers up to 6 A, and fluorescent or energy-saving and LED loads up to 0.5 A. For motors, the rating is 3.5 A (cos phi 0.6), which helps when the actuator is used for shutter or blind drives or other small AC motors.

Compatibility and fit

This actuator is part of the By-me automation ecosystem and is compatible with By-me 21509 control units, with configuration support through EasyTool Professional. Before ordering, confirm your vessel has a By-me BUS available at the panel, enough DIN space for a 4-module device, and a wiring plan that matches how your loads are distributed across the four relays.

Use on board

This is a good match for boats that already use By-me automation and want a central DIN-rail switching point for multiple cabin lighting circuits, fan-coil zones, or motorized shading, while keeping the hardware accessible inside an electrical cabinet. It also suits refits where you are reorganizing a panel and need four relay channels in a single device footprint.

Maintenance and care

Once installed, there is little routine maintenance beyond keeping the enclosure dry and checking terminal tightness during periodic electrical inspections. If you are troubleshooting a circuit, the status LEDs and local buttons can help confirm relay operation at the panel without chasing wiring runs through the boat.

Specifications

Light Color
N/A
Installation
Screws
Product Color
Silver
Product Material
Plastic
Product Type
Relay Actuator
Amperage
16A
Degree of Protection
IP20
Electric Current (Power)
Direct Current (DC)
Operating Voltage
120-230V

Reviews (0)

Shipping and delivery

Orders are processed within 2 business days, which includes verification, packing, and dispatch. Orders of $100 or more qualify for free shipping when eligible. For orders under $100, shipping costs are calculated at checkout based on destination, package weight, and selected service. International shipping is available for eligible products, and certain items may require additional handling, warehouse transfers, or may ship directly from the manufacturer, which can affect processing time.

Deliveries are handled by preferred carriers such as USPS, UPS, FedEx, DHL, and others depending on your location and selected service. Estimated delivery times are displayed at checkout and may vary due to customs processing, carrier delays, weather, postal disruptions, or other circumstances beyond our control. Once your order ships, you'll receive a confirmation email with tracking information. Tracking may take up to 24 hours to update on the carrier's website and is also available through your account when applicable.

We ship throughout the United States and to most international destinations for products eligible for international shipping. International orders may be subject to customs duties, taxes, brokerage charges, or other import fees, which are the customer's responsibility and are not included in the product or shipping price. PO Boxes are accepted only when shipping through USPS, and not all packages qualify for this option. If your order does not arrive within the estimated delivery window, please contact us at info@apollolighting.com or +1 (954) 375-0100 so we can assist with locating your package.

Learn more.

Returns and refunds

Returns may be requested within 30 days of receiving your order. Items must be unused, uninstalled, unaltered, and returned in their original packaging with all tags, packing materials, blank warranty cards, manuals, instructions, accessories, and included items. Certain products, including installed or used electronics, electrical components, lighting, consumables, custom or special-order items, cut-to-length products, safety equipment, and merchandise exposed to water or marine conditions, may not be eligible for return.

To request a return, sign in to your account and select the applicable order and items, and submit your request for review. Eligible unfulfilled items may also be submitted for cancellation within 1 hour of placing the order. Returns or cancellations are not considered approved until you receive confirmation from Apollo Lighting. Please do not ship or drop off merchandise before receiving return approval and instructions.

Customers are responsible for arranging and paying for return shipping unless the return is due to an error by Apollo Lighting or the item is verified as defective, damaged, or incorrect. Missing, damaged, defective, or incorrect items must be reported within 2 business days of delivery, and photos or other documentation may be required for review. If the issue is verified, Apollo Lighting may provide or reimburse return shipping and issue a replacement or refund depending on the circumstances. International customers are responsible for return shipping, duties, taxes, customs charges, brokerage fees, and other costs associated with an international return.

After your return is received and inspected, approved refunds are issued to the original payment method and may take 5-7 business days to appear after processing. Original shipping and handling charges are nonrefundable, and the value of any included free items that are not returned may be deducted from the refund. Apollo Lighting does not charge a standard restocking fee on eligible returns. Returns that are incomplete, damaged, installed, used, altered, improperly packaged, or otherwise do not meet the eligibility requirements may be refused. We recommend using a trackable and appropriately insured shipping service for all customer-arranged returns.

For assistance, contact info@apollolighting.com or call +1 (954) 375-0100.

Learn more.

Product warranty

Many products sold by Apollo Lighting include a manufacturer's warranty covering defects in materials or workmanship. Warranty terms vary by brand, product category, and model, so eligibility, coverage duration, exclusions, and available remedies are determined by the applicable manufacturer. We recommend reviewing the warranty information provided with your product before installation or use, especially for marine electronics, navigation equipment, lighting, electrical systems, pumps, safety equipment, and other specialized marine products.

If you need warranty service, the claim must follow the process established by the manufacturer, authorized service center, or designated warranty provider. You may be asked for proof of purchase, a serial number, product registration, photos, maintenance or installation records, or other documentation. Apollo Lighting does not determine or modify a manufacturer's warranty coverage or final claim decision, but we are happy to help provide purchase information and direct you to the appropriate manufacturer or warranty resource.

Keep your receipt, product documentation, serial number information, and original packaging when practical. Damage caused by normal wear, misuse, improper installation, insufficient maintenance, corrosion, impact, unauthorized modifications, electrical issues, or operation outside the manufacturer's specifications may not be covered. Warranty claims are separate from standard returns, so a product that has been installed, used, or exposed to marine conditions may no longer qualify for return while still remaining eligible for evaluation under the manufacturer's applicable warranty.

Learn more.

Your cart

Your cart is empty

Choose options