Garmin Intelliducer NMEA 2000 Thru-Hull Depth/Temp Transducer, 0-12° Deadrise, 150W, 160 kHz, 900 ft Max Depth

Overview

The Garmin 010-00701-00 is a thru-hull Intelliducer that sends water depth and water temperature data onto a NMEA 2000 network for display on compatible instruments and chartplotters. It is built for hull sections with 0° to 12° deadrise and uses 160 kHz sonar at 150 W (RMS), with a rated depth capability up to 900 ft (275 m) depending on water and bottom conditions.

This is a depth and temperature sensor, not a sonar module for bottom imaging. Because it reports over NMEA 2000, the same depth and temperature data can be shared across multiple displays on the network.

Key features

• NMEA 2000 connectivity for water depth and temperature data on the network
• 0° to 12° tilt range to match common near-flat thru-hull mounting locations
• 160 kHz traditional depth sonar with 150 W (RMS) output
• Rated depth capability up to 900 ft (275 m), with actual performance dependent on conditions
• Powered from the NMEA 2000 network (9 to 16 Vdc) with up to 2 W maximum power usage
• Includes a 19 ft 8 in (6 m) NMEA 2000 drop cable for a clean run to the backbone
• NMEA 2000 certified device

What’s included

• Thru-hull Intelliducer (top and bottom portions)
• Gasket and locking ring
• NMEA 2000 drop cable (19 ft 8 in / 6 m)
• NMEA 2000 T-connector and terminators
• Installation instructions

Compatibility and fit

This model is intended for fiberglass and metal hulls. It is not meant for wood hulls. Plan space inside the hull for the internal housing and cable connection, and allow room to rotate and lock the internal portion during installation.

The installed unit body is about 4 19/32 in (116.3 mm) long, 4 in (101.4 mm) wide, and 3 in (76.2 mm) deep. The thru-hull installation uses a 2 in (51 mm) hole, so it is best to confirm access in the bilge area and make sure the chosen spot stays submerged during use.

Installation and setup

Thru-hull placement matters more than most owners expect. A location close to the keel and away from intakes, discharges, strakes, and running gear helps avoid aerated water that can cause depth dropouts. On faster boats, placement can require extra care to keep the sensor in solid water at speed.

Because this is a below-waterline fitting, proper surface prep and a marine sealant suitable for below-waterline use are part of a normal install. For saltwater installations, a water-based antifouling coating on the external portion helps control growth that can reduce depth performance over time.

Electrical and network integration

The Intelliducer connects to the NMEA 2000 backbone with a standard T-connector and drop cable, and it draws its power from the network. If your boat already has a NMEA 2000 backbone, this sensor becomes another node on that bus so the data can be displayed anywhere on the network that supports depth and temperature.

When building a small network from scratch, correct backbone termination and proper network power are required for stable operation. The included terminators cover the termination requirement for a basic backbone layout.

Use cases on board

This sensor is a good match for boats that want dependable depth and water temperature on NMEA 2000 instrumentation for cruising, fishing, and general navigation, and that prefer a thru-hull install over a transom-mounted sensor. It also fits well on builds where multiple displays need to see the same depth and temperature data without adding a separate sounder module.

Orders are processed within 2 business days, which includes verification, packing, and dispatch. Orders of $100 or more qualify for free shipping when eligible. For orders under $100, shipping costs are calculated at checkout based on destination, package weight, and selected service. International shipping is available for eligible products, and certain items may require additional handling, warehouse transfers, or may ship directly from the manufacturer, which can affect processing time.

Deliveries are handled by preferred carriers such as USPS, UPS, FedEx, DHL, and others depending on your location and selected service. Estimated delivery times are displayed at checkout and may vary due to customs processing, carrier delays, weather, postal disruptions, or other circumstances beyond our control. Once your order ships, you'll receive a confirmation email with tracking information. Tracking may take up to 24 hours to update on the carrier's website and is also available through your account when applicable.

We ship throughout the United States and to most international destinations for products eligible for international shipping. International orders may be subject to customs duties, taxes, brokerage charges, or other import fees, which are the customer's responsibility and are not included in the product or shipping price. PO Boxes are accepted only when shipping through USPS, and not all packages qualify for this option. If your order does not arrive within the estimated delivery window, please contact us at info@apollolighting.com or +1 (954) 375-0100 so we can assist with locating your package.

Learn more.

Returns may be requested within 30 days of receiving your order. Items must be unused, uninstalled, unaltered, and returned in their original packaging with all tags, packing materials, blank warranty cards, manuals, instructions, accessories, and included items. Certain products, including installed or used electronics, electrical components, lighting, consumables, custom or special-order items, cut-to-length products, safety equipment, and merchandise exposed to water or marine conditions, may not be eligible for return.

To request a return, sign in to your account and select the applicable order and items, and submit your request for review. Eligible unfulfilled items may also be submitted for cancellation within 1 hour of placing the order. Returns or cancellations are not considered approved until you receive confirmation from Apollo Lighting. Please do not ship or drop off merchandise before receiving return approval and instructions.

Customers are responsible for arranging and paying for return shipping unless the return is due to an error by Apollo Lighting or the item is verified as defective, damaged, or incorrect. Missing, damaged, defective, or incorrect items must be reported within 2 business days of delivery, and photos or other documentation may be required for review. If the issue is verified, Apollo Lighting may provide or reimburse return shipping and issue a replacement or refund depending on the circumstances. International customers are responsible for return shipping, duties, taxes, customs charges, brokerage fees, and other costs associated with an international return.

After your return is received and inspected, approved refunds are issued to the original payment method and may take 5-7 business days to appear after processing. Original shipping and handling charges are nonrefundable, and the value of any included free items that are not returned may be deducted from the refund. Apollo Lighting does not charge a standard restocking fee on eligible returns. Returns that are incomplete, damaged, installed, used, altered, improperly packaged, or otherwise do not meet the eligibility requirements may be refused. We recommend using a trackable and appropriately insured shipping service for all customer-arranged returns.

For assistance, contact info@apollolighting.com or call +1 (954) 375-0100.

Learn more.

Many products sold by Apollo Lighting include a manufacturer's warranty covering defects in materials or workmanship. Warranty terms vary by brand, product category, and model, so eligibility, coverage duration, exclusions, and available remedies are determined by the applicable manufacturer. We recommend reviewing the warranty information provided with your product before installation or use, especially for marine electronics, navigation equipment, lighting, electrical systems, pumps, safety equipment, and other specialized marine products.

If you need warranty service, the claim must follow the process established by the manufacturer, authorized service center, or designated warranty provider. You may be asked for proof of purchase, a serial number, product registration, photos, maintenance or installation records, or other documentation. Apollo Lighting does not determine or modify a manufacturer's warranty coverage or final claim decision, but we are happy to help provide purchase information and direct you to the appropriate manufacturer or warranty resource.

Keep your receipt, product documentation, serial number information, and original packaging when practical. Damage caused by normal wear, misuse, improper installation, insufficient maintenance, corrosion, impact, unauthorized modifications, electrical issues, or operation outside the manufacturer's specifications may not be covered. Warranty claims are separate from standard returns, so a product that has been installed, used, or exposed to marine conditions may no longer qualify for return while still remaining eligible for evaluation under the manufacturer's applicable warranty.

Learn more.